[ NDT-net Forum ]
[ Follow Ups ] [ Post Followup ] [ Help ]

---

Re: Inspection of a Platforming Plant Heat Exchanger

Posted by: Richard D. Roberts (PID_163), E-mail: richardr@qi2.com, on May 26, 2000 at 16:12 :

In Reply to: Inspection of a Platforming Plant Heat Exchanger posted by : Amedeo Marino on May 25, 2000 at 14:57:

: we have beenasked to perform the following testing:

: Vertical Heat Exchanger
: Tube Length 21 m
: Tube Diameter 3/4"
: Tube Material T11
: Number of tubes 1885
: The heat exchanger has been out of service for the last 5 years.
: Which is the best inspection to suggest the customer ?
: Is it OK Remote Field or MFL for flaw detection and IRIS for flaw carachterization ?
: Will the verticality of the item affect the performance of the inspection ?

: I would be very gratefull for your help.

: Best Regards.

---

Follow Ups:

---

Post a Followup:

Name:
E-Mail:
Subject:

Comments:
: : we have beenasked to perform the following testing: : : Vertical Heat Exchanger : : Tube Length 21 m : : Tube Diameter 3/4" : : Tube Material T11 : : Number of tubes 1885 : : The heat exchanger has been out of service for the last 5 years. : : Which is the best inspection to suggest the customer ? : : Is it OK Remote Field or MFL for flaw detection and IRIS for flaw carachterization ? : : Will the verticality of the item affect the performance of the inspection ? : : I would be very gratefull for your help. : : Best Regards.

Optional Link URL:	Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important!	Information on my Home Page
Optional Image URL:	http://www....gif

Attention! Please click the button only once. This may take a moment to process

---

[ NDT-net Forum ] [ Help ]