Forum Technical Discussions      Re: Aws d1.1 UT Indication rate Posted by: Ed T. , E-mail: Address, on December 21, 2008 at 04:14 : In Reply to: Aws d1.1 UT Indication rate posted by : xiaohuozi , E-mail: Address, on December 20, 2008 at 13:42 : ----------- Start Original Message ----------- : may you tell how to define "b" of a-b-c=d of UT indication rate in AWS D1.1? Thanks. ------------ End Original Message ------------ b is your dB level at reference. In other words when you set your 0.060" diameter hole in the IIW block to say 80% FSH and your dB level is 50dB, then 50 becomes b. Follow Ups: Re: Aws d1.1 UT Indication rate MEHDY 22:50 Dec-24-2008 (0) Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : may you tell how to define "b" of a-b-c=d of UT indication rate in AWS D1.1? Thanks. : b is your dB level at reference. In other words when you set your 0.060" diameter hole in the IIW block to say 80% FSH and your dB level is 50dB, then 50 becomes b. ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help