[ NDT-net Forum ]
[ Follow Ups ] [ Post Followup ] [ Help ]

Carbon Composite Tubing Wall Thickness Measurement

Posted by: David Miller , E-mail: davemiller@pcmc.com, on December 07, 2001 at 16:48 :

I have a need to non-destructively measure the wall thickness of carbon fiber composite tubing in the range of the following:
OD: 25-50mm
WALL THICKNESS: 5-10mm
I need to make many accurate measurements around the circumference of this tubing to verify concentricity of the OD and ID. Can ultrasonic measurement be used for this purpose? Is there another method which would work better...capacitance transducers? Any help would be appreciated.


Follow Ups:



Post a Followup:

Name:
E-Mail:

Subject:

Comments:

Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important! Information on my Home Page
Optional Image URL: http://www....gif


Attention! Please click the button only once. This may take a moment to process


[ NDT-net Forum ] [ Help ]