[ NDT-net Forum ]
[ Follow Ups ] [ Post Followup ] [ Help ]

---

Re: X-ray tube for RT-inspection of heat exchanger welds

Posted by: Dent McIntyre , E-mail: jdmcintyre@babcock.com, on December 18, 2001 at 15:00 :

In Reply to: X-ray tube for RT-inspection of heat exchanger welds posted by : Peter Rost , E-mail: peter.rost@basf-ag.de, on December 17, 2001 at 16:13 :

You should also consider Isotopes for this requirement. Yb 169 or SE 75 may be alternatives. There are some suppliers out there that have developed special fixtures for the tube to tubesheet welds you describe.

: Dear colleagues,
.
: I`m looking for a x-ray tube for RT-welding inspection of heat exchanger tubes welded in the tube plate.
: The dimension of the tubes are appr. 10 to 50 mm in diameter and 1 to 6 mm in wall-thickness.
: I need a special X-ray tube to do the weld inspction from inside to outside of the tube to inspect the tube weld.
: Do aou have any informations?
.
: P. Rost
.

---

Follow Ups:

---

Post a Followup:

Name:
E-Mail:
Subject:

Comments:
: You should also consider Isotopes for this requirement. Yb 169 or SE 75 may be alternatives. There are some suppliers out there that have developed special fixtures for the tube to tubesheet welds you describe. . . . : : : Dear colleagues, : . : : I`m looking for a x-ray tube for RT-welding inspection of heat exchanger tubes welded in the tube plate. : : The dimension of the tubes are appr. 10 to 50 mm in diameter and 1 to 6 mm in wall-thickness. : : I need a special X-ray tube to do the weld inspction from inside to outside of the tube to inspect the tube weld. : : Do aou have any informations? : . : : P. Rost : . .

Optional Link URL:	Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important!	Information on my Home Page
Optional Image URL:	http://www....gif

Attention! Please click the button only once. This may take a moment to process

---

[ NDT-net Forum ] [ Help ]