Technical Discussions: Re: Triggering pulse

[ Technical Discussions ]
[ Follow Ups ] [ Post Followup ] [ Help ]

Re: Triggering pulse
Posted by: Richard Kazares (PID_1893), E-mail: rkazares@ndtautomation.com, on December 08, 2004 at 21:30 :
In Reply to: Triggering pulse posted by : S.G. , E-mail: shashu333@yahoo.com, on December 08, 2004 at 10:23 :
Modern PC-based C-Scan systems can operate at PRF rates of over 10,000 per second per channel. So the the answer to your question - is better phrased: "How many pulses per second do you need to cover your part?"
Given the capabilities of most systems, coupled with the availablity of either independent multi-channel or multiplexed multi-channel operation, the application solution is one of blending inspection requirements and cost. Many solutions can be impleted which cover the through put rates you require (and more, if needed).
We design and manufacture systems such as you describe - I'd be happy to provide you with more product and solution oriented information upon your e-mail with detailed operational requirements.
----------- Start Original Message -----------
: Hi, Friends
: I want to know about the electronic circuit capability of pulser reciver card for ultrasonic testing during fast scanning.
: 1) For high speed testing say 25mtrs/minutes how many pulses will get require to trigger the gate?
: 2) For testing speed 25 mtrs/mintues how much PRF will require for the 16 channel instrument? Can anyone reply me the exact formula for this?
: 3) Please suggest us name of companies which can supply this type of Autometed system for pipe testing.(pipe diameter ranging from 100 mm to 450 mm)
: Thanking you.
:
------------ End Original Message ------------

NDT Automation

Follow Ups:

Re: Triggering pulse S.G 04:45 Dec-09-2004 (1)

Re: Triggering pulse Udo Schlengermann 09:58 Dec-20-2004 (0)

Post a Followup:

Name:

E-Mail:

Subject:

Comments:
----------- Start Original Message ----------- : Modern PC-based C-Scan systems can operate at PRF rates of over 10,000 per second per channel. So the the answer to your question - is better phrased: "How many pulses per second do you need to cover your part?" : Given the capabilities of most systems, coupled with the availablity of either independent multi-channel or multiplexed multi-channel operation, the application solution is one of blending inspection requirements and cost. Many solutions can be impleted which cover the through put rates you require (and more, if needed). : We design and manufacture systems such as you describe - I'd be happy to provide you with more product and solution oriented information upon your e-mail with detailed operational requirements. : : Hi, Friends : : I want to know about the electronic circuit capability of pulser reciver card for ultrasonic testing during fast scanning. : : 1) For high speed testing say 25mtrs/minutes how many pulses will get require to trigger the gate? : : 2) For testing speed 25 mtrs/mintues how much PRF will require for the 16 channel instrument? Can anyone reply me the exact formula for this? : : 3) Please suggest us name of companies which can supply this type of Autometed system for pipe testing.(pipe diameter ranging from 100 mm to 450 mm) : : Thanking you. : : ------------ End Original Message ------------

Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP

Link Title: is important! Information on my Home Page

Optional Image URL: http://www....gif

Attention! Please click the button only once. This may take a moment to process
[ Technical Discussions ] [ All Message Boards ] [ Help ]

Optional Link URL:	Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important!	Information on my Home Page
Optional Image URL:	http://www....gif