Forum General Discussions      Re: Carbon Composite Calibration block Posted by: Michel Couture (PID_2805), E-mail: Address, on November 25, 2008 at 17:37 : In Reply to: Carbon Composite Calibration block posted by : Godfrey Hands , E-mail: Address, on November 25, 2008 at 14:59 : Hi Godfrey, I don't know what is your application, but when I was working on F18 aircraft, McDonald Douglas had their own supplier and was providing us directly with what we needed. Maybe you could work with your client and come up with something that would be satisfactory to all. Also, I don't normally advertise for manufacturers (Try to stay neutral), but Curtis Industries Inc, in Kittanning, Pensylvania, USA may be able to help. Again they are fabricating a wide variaty of Calibration pieces. Not sure about composite, but it's worth a try. Cheerio's Michel ----------- Start Original Message ----------- : Hi, : I am looking for a source of Carbon Composite Thickness calibration blocks or step wedges. : Who markets these? Who manufactures them? : Godfrey ------------ End Original Message ------------ Follow Ups: Re: Carbon Composite Calibration block S.V.Swamy 05:20 Nov-26-2008 (1) Re: Carbon Composite Calibration block John Brunk 14:24 Nov-26-2008 (0) Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Hi Godfrey, : I don't know what is your application, but when I was working on F18 aircraft, McDonald Douglas had their own supplier and was providing us directly with what we needed. : Maybe you could work with your client and come up with something that would be satisfactory to all. : Also, I don't normally advertise for manufacturers (Try to stay neutral), but Curtis Industries Inc, in Kittanning, Pensylvania, USA may be able to help. Again they are fabricating a wide variaty of Calibration pieces. Not sure about composite, but it's worth a try. : Cheerio's : Michel : : Hi, : : I am looking for a source of Carbon Composite Thickness calibration blocks or step wedges. : : Who markets these? Who manufactures them? : : Godfrey ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum General Discussions Help