Conference & Proceedings

8th European Workshop On Structural Health Monitoring (EWSHM 2016)

5-8 July 2016, Spain, Bilbao
Right Now in Bilbao 08:45 Wed 12

347 Oral Presentations in 35 Sessions
  • AAA - Keynotes -
  • Aerospace structures: Modeling, Verification & ValidationR. Groves (TU Delft, Netherlands), P. Qing ( Xiamen Univ., China), P. Foote ( Cranfield Univ, UK), M. Frovel (INTA, Spain)
    Wednesday 6. Jul 09:30 - 19:00 - A3A
  • Civil Structures. Modeling, experimental demonstrationsW. Habel (BAM Berlin, Germany), J Lynch (Univ. Michigan, USA), D. Inaudi (Smartec, Switzerland)
    Tuesday 5. Jul 16:30 - Wednesday 6. Jul 12:30 - A4
  • ConcreteK. Loh (UCSD, USA)
    Tuesday 5. Jul 10:30 - 16:00 - A4
  • Condition monitoring of rotating machineryJ. Kullaa (Helsinki Metropolia Univ., Finland), A. Iturrospe (Mondragon Univ, Spain)
    Wednesday 6. Jul 11:00 - 12:30 - C1
  • COST Action 1402. Health monitoring and structural performance assessmentMichael Döhler (INRIA), Geert Lombaert, Eleni Chatzi (ETHZ, Switzerland), Sebastian Thöns (TUD, Denmark)
    Thursday 7. Jul 09:00 - 16:00 - A4
  • Damage detection by Acoustic EmissionL. Faravelli ( Univ Pavia, Italy), M. Gresil ( Manchester Univ., UK)
    Tuesday 5. Jul 10:30 - 12:50 - B1
  • Diagnostics and Prognostics for Damage AssesmentM. Buderath (Airbus, Germany), D. Bernal (Northeastern Univ., USA), L. Damkilde ( Aalborg Univ, Dk)
    Thursday 7. Jul 09:00 - 16:00 - C1
  • Fatigue monitoring for residual life-cycle assessment and maintenanceEleni Chatzi (ETH Zürich), C. Papadimitriou (Univ Thessaly, Greece).
    Wednesday 6. Jul 14:00 - 18:30 - C1
  • Fiber Optic Sensors SystemsM. Tur (Tel-Aviv Univ., Israel), P. Ferdinand (CEA, France), M. Giordano ( Univ Sannio, Italy)
    Tuesday 5. Jul 10:30 - 18:30 - A3A
  • Guided waves based methods for SHM-I E. Flynn ( Los Alamos NL, USA), S. Yuan ( NUAA, China)
    Wednesday 6. Jul 09:30 - 18:30 - A2
  • Guided waves based methods for SHM-II P Cawley ( Imperial College, UK), Z. Su ( Hong Kong Univ, China)
    Thursday 7. Jul 09:00 - 12:40 - A2
  • Guided waves modeling and simulationsV. Giurgiutiu ( Univ South Carolina, USA), D. Saravanos (Univ Patras, Greece), R. Lammering ( HSU, Germany)
    Tuesday 5. Jul 10:30 - 18:30 - A2
  • Image processingG Akhras (Royal Military College, Canada)
    Tuesday 5. Jul 10:30 - 12:50 - A3B
  • JASTAC: Results of ten years of cooperation Airbus-Japan on SHMNobuo Takeda ( Univ Tokyo), Clemens Bockenheimer (Airbus)
    Thursday 7. Jul 14:00 - Tuesday 5. Jul 16:00 - A1
  • Neural Networks and AI approachesLuis Mujica ( UPC, Spain), Peter Kraemer (Wölfel Engineering GmbH, Germany)
    Thursday 7. Jul 14:00 - 16:00 - A3B
  • New approachesNathan Salowitz (Univ Wisconsin, USA), Francesc Pozo ( UPC, Spain)
    Tuesday 5. Jul 10:30 - 12:30 - A1
  • New concepts and sensors based on micro and nanotechnologiesNieves Murillo (Tecnalia, Spain), S. Lanceros-Méndez ( Univ Minho, Portugal)
    Wednesday 6. Jul 14:00 - 16:00 - A3B
  • Operational Modal AnalysisL. Mevel (INRIA, France), A. Mita ( Keio Univ., Japan)
    Wednesday 6. Jul 14:00 - 18:30 - A4
  • Optimization sensors topologyJ. Rodellar (UPC, Spain), N. Constantin ( UPB, Romania)
    Tuesday 5. Jul 14:00 - 16:00 - A3B
  • Piezoelectrics as sensors/actuatorsVincent Le Cam (IFSTTAR, F), Luca de Marchi (Univ. Bologna, IT), Tadeusz Uhl (AGH Univ., Poland)
    Tuesday 5. Jul 10:30 - Wednesday 6. Jul 11:00 - C1
  • Sensors other than PZT and FOSF. Casciati ( Univ Pavia, Italy)
    Tuesday 5. Jul 16:30 - 18:30 - C1
  • SHM application to railway industry.Claus Peter Fritzen ( Univ Siegen), Y.Q. Ni, (Hong Kong Polytechnic University, China)
    Wednesday 6. Jul 09:30 - 12:30 - A3B
  • SHM application to Wind turbinesW. Ostachowicz (Polish Academy of Sciences, Poland), P. Malinowski, P Omenzetter, M. McGugan, A. Fernandez-Lopez.
    Wednesday 6. Jul 09:30 - 18:30 - B1
  • SHM by addittion of nanoparticlesA Urena, J Rams (URJC, Spain), Sonia Florez (Tecnalia, Spain)
    Wednesday 6. Jul 16:30 - 18:30 - A3B
  • SHM for bridgesDr. Jesus Isoird (Tecnalia, SPAIN), Dr. Belén Riveiro (Univ. Vigo), Dr. Fernando Moreu (Univ. of New Mexico)
    Thursday 7. Jul 09:00 - 16:00 - A3A
  • SHM for BuildingsM. Limongelli ( Politecnico de Milano, Italy),
    Wednesday 6. Jul 11:00 - 13:00 - A4
  • SHM for Oil & Gas industriesDr. Michel Leblanc(Halliburton, USA), J. Singer ( Fugro Technologies, Netherlands)
    Tuesday 5. Jul 16:30 - 18:30 - A3B
  • SHM in ActionC. Boller ( Saarland Univ., Germany), B. Glisic (Princeton Univ., USA)
    Friday 8. Jul 10:30 - 12:30 - A1
  • SHM opportunities and applications for human sensingLiming Salvino (ONR Global), David Stargel, (US Air Force)
    Wednesday 6. Jul 09:30 - 12:30 - A1
  • SHM Simulation Christian Boller (University of Saarlandes, Germany), Roy Mahapatra ( Indian Inst. Science, India)
    Thursday 7. Jul 09:00 - 12:30 - A1
  • Signal processing techniques.A. Suleman ( Univ Victoria, Canada), J.M. Vega ( UPM, Madrid)
    Thursday 7. Jul 09:00 - 12:30 - A3B
  • Smart Composite StructuresFernando Rodriguez-Lence ( FIDAMC, Spain), F. Aliabadi ( Imperial College, UK)
    Thursday 7. Jul 09:00 - 16:00 - B1
  • Ultrasonic testingC. de Miguel-Giraldo (Airbus Spain),
    Thursday 7. Jul 14:00 - 16:00 - A2
  • Uncertainty. Statistical Methods for SHM.S. Fassois (Univ Patras, Greece), Lea Cot (Inst Clement Ader, France), D. Zonta (Univ Trento, Italy)
    Tuesday 5. Jul 14:00 - 18:30 - B1

Nonlinear Acoustics for Structural Health Monitoring – Classical vs. Non-classical Approaches

W. Staszewski

Deaprtment of Robotics and Mechatronics, AGH University of Science and Technology, Krakow, Poland

Success Stories of Diverse Real-Life Fiber Optic Sensing SHM Applications

A. Mendez

MCH Engineering LLC, Alameda, USA

Structural Health Monitoring, The Beginning and the End

D. Adams

Vanderbilt University, Nashville, USA

Self-sufficient and self-contained sensing for local monitoring of in-situ bridge structures

H. Sohn*, H. Lim, J. Kim, S. Yang, J. Lee, Y. Kim, P. Liu, Y. Jang, G. Moon, Y. Yi, D. Kim, J. Kim, S. Jung

*Departments of Civil and Environmental Engineering, KAIST, Yuseong-gu, South Korea

Towards a Risk-Based Design Paradigm for Structural Health Monitoring Systems

M. Todd

Structural Engineering, University of California San Diego, La Jolla, USA

Design of Multifunctional Structural Batteries with Health Monitoring Capabilities

F. Chang

Aeronautics & Astronautics, Stanford University, Stanford, USA

The certification of SHM systems in aeronautical sector

I. Eiriz*, J. Guerediaga, P. Venegas, A. Montero, I. Goñi, I. Sáez de Ocáriz

*CTA, MIÑANO, Spain

Engine Health Monitoring

I. Ulizar

ITP, Madrid, Spain

Wind Turbine Monitoring for Control Versions Comparison

J. Perez-Campion

IBERDROLA, Bilbao, Spain

09:30 Wed 6. Jul

Perspectives on Structural Health Monitoring of Composite Civil Aircraft

R. Groves

Faculty of Aerospace engineering, Delft University of Technology, Delft, Netherlands

09:50 Wed 6. Jul

Fatigue crack quantification approach based on multi-path unit-cell concept in sensor network

V. Janapati, S. Yadav, A. Kumar*, R. Ikegami, E. Habtour

*Acellent Technologies Inc., Sunnyvale, USA

10:10 Wed 6. Jul

Damage Precise Localization on an Aircraft Stabilizer Structure via Few Vibration Sensors and Low Frequency Bandwidth

C. Sakaris, J. Sakellariouˆ, S. Fassois*

*University of Patras, Patras, Greece

11:00 Wed 6. Jul

Lamb-wave-based monitoring of the aircraft during full-scale fatigue experiment - results and conclusions

Z. Dworakowski*, K. Dragan, T. Stepinski, T. Uhl

*Department of Robotics and Mechatronics, AGH University of Science and Technology, Krakow, Poland

11:20 Wed 6. Jul

Self-Powered, Energy Harvested, Wireless Fiber Optic Sensor (WiFOS) SHM System for Helicopter Rotors

E. Mendoza

Redondo Optics Inc, Redondo Beach, USA

11:40 Wed 6. Jul

Elastic Waves Simulation on Aircraft Subcomponent for test correlation using piezoelectric sensors

F. Sánchez Iglesias*, R. Tejerina, J. García-Alonso, P. Caffyn, M. Iglesias-Vallejo

*Airbus Defense and Space (AirbusDS), Getafe, Spain

12:00 Wed 6. Jul

Dynamic strain distribution monitoring of 5.5 m CFRP blade using 5 m FBGs interrogated by optical frequency domain reflectometry

D. Wada*, H. Igawa, T. Kasai

*Aeronautical Technology Directorate, Japan Aerospace Exploration Agency, Tokyo, Japan

12:20 Wed 6. Jul

Development of Structural Health and Load Monitoring System and its Implementation into an Aircraft Flying Demonstrator

M. Lilov*, T. Siebel, C. Contell Asins, O. Schwarzhaupt, V. Carli

*Department of Reliability and System Integration, Fraunhofer Institute for Structural Durability and System Reliability LBF, Darmstadt, Germany

14:00 Wed 6. Jul

Probability-based damage assessment on a composite door surrounding structure

M. Moix Bonet*, B. Eckstein, P. Wierach

*German Aerospace Center, Braunschweig, Germany

14:20 Wed 6. Jul

The potential of fuse-like sensing systems in engineering structures – operating applications in civil aircraft and chemical installations

H. Pfeiffer*, J. Perremans, H. Sekler, M. Schoonacker, M. Wevers

*Department of Materials Engineering (MTM), KU Leuven (University of Leuven), Leuven, Belgium

14:40 Wed 6. Jul

Additive manufacturing for novel structural health monitoring systems

M. Strantza*, M. Hinderdael, D. De Baere, I. Vandendael, H. Terryn, D. Van Hemelrijck, P. Guillaume

*Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Brussels, Belgium

15:00 Wed 6. Jul

Integrated SHM for aircraft wing and fuselage with built-in and mobile UPI systems in Smart Hangar

H. Shin, D. Bae, J. Lee*

*Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology, Daejeon, South Korea

15:20 Wed 6. Jul

An Innovative Health Monitoring System for Aircraft Landing Gears

G. Perone, M. Bruno, F. Bocchetto, G. Breglio*, M. Pugliese, A. Calandra, A. Nocella, A. Cavallari, S. Schisano Lo Moriello, G. Capuano, D. Rossetti

*Department of Electrical Engineering and Information Technology, University of Naples Federico II, Napoli, Italy

15:40 Wed 6. Jul

Landing Gear Structural Health Prognostic/Diagnostic System

C. Forrest*, A. Molina

*Chad Forrest,, ES3, Inc., Clearfield, USA

16:30 Wed 6. Jul

Further Results Of Lamb Waves Approach To Assess Corrosion Damage In An Aeronautical Aluminum Alloy

G. Prado*, A. Tamba, F. Dotta, L. Vieira, R. Rulli, G. Silva, J. Costa

*Embraer, São José dos Campos, Brazil

16:50 Wed 6. Jul

Data based classifiers for identification of aircraft landing characteristics

G. Holmes*, A. Thomas, W. Capener, K. Worden, E. Cross

*Mechanical Engineering, University of Sheffield, Sheffield, United Kingdom

17:10 Wed 6. Jul

Multi-level repair decision-making process for composite structures

V. Dhanisetty*, V. Dhanisetty*, W. Verhagen, R. Curran

*Aerospace Engineering - Air Transport & Operations, Delft University of Technology, Delft, Netherlands

17:30 Wed 6. Jul

Correlation of Structural Lifetime to Mission Utilization for Military Aircraft

J. Newcamp*, W. Verhagen, R. Curran

*Air Transport and Operations, Delft University of Technology, Den Haag, NL, Netherlands

17:50 Wed 6. Jul

Non-destructive Ageing State Determination of Solid Rocket Motor Charges

G. Tussiwand*, L. Eineder, G. Mußbach, M. Bohn

*MBDA Bayern-Chemie GmbH, Aschau am Inn, Germany

18:10 Wed 6. Jul

Strain monitoring on a composite aircraft cabin with fiber optic sensors

P. Fernández Díaz-Maroto*, A. Fernández López, R. Fernández Valderas, N. Gutiérrez Vázquez, F. Lasagni, A. Güemes

*Center of Composite Materials and Smart Structures, Polytechnical University of Madrid (UPM), Madrid, Spain

16:30 Tue 5. Jul

A methodology for dam safety evaluation and anomaly detection based on boosted regression trees

F. Salazar*, J. González, M. Toledo, E. Oñate

*International Center for Numerical Methods in Engineering (CIMNE), Madrid, Spain

16:50 Tue 5. Jul

Implementation of communication, collection and tracking units in crisis operation

F. Casciati, S. Casciati, L. Faravelli, M. Vece*

*DICAr, University of Pavia, Pavia, Italy

17:10 Tue 5. Jul

Assessment of the structural behaviour of concrete dams based on wavelet transforms

J. Caires da Mata*, J. Santos

*Concrete Dam Department, Portuguese National Laboratory for Civil Engineering (LNEC), Lisbon, Portugal

17:30 Tue 5. Jul

A Diverse Monitoring for Post-Accident using Alternative Powers

J. Kim

I&CHumanFactor Division, Korea Atomic Energy Research Institute, Daejeon, South Korea

17:50 Tue 5. Jul

Debonding identification of FRP strengthened concrete beams with PZT sensors

R. Perera*, R. Sun, E. Sevillano, M. Baena, C. Barris

*Mechanical Engineering, Technical University of Madrid (Spain), Madrid, Spain

18:10 Tue 5. Jul

Review of Distributed Optical Fiber Sensors in Civil Engineering applications

A. Barrias*, J. Casas, S. Herrero

*Department of Civil and Environmental Engineering, Technical University of Catalonia . Barcelonatech (UPC), Barcelona, Spain

18:30 Tue 5. Jul

The static and dynamic monitoring of the Asinelli Tower in Bologna,Italy

S. Baraccani*, M. Palermoˆ, S. Silvestri, G. Gasparini, T. Trombetti, R. Azzara

*University of Bologna, Bologna, Italy

09:30 Wed 6. Jul

Civil Infrastructure Monitoring with Smartphone Sensors and Citizen Participation

E. Ozer*, M. Feng

*Ekin Ozer, Maria Q. Feng, Columbia University, New York, USA

09:50 Wed 6. Jul

Microwave Radar with Transponder for Three-Dimensional Displacement Measurement in Structural Health Monitoring

X. Peng*, W. Chenˆ, B. Shao

*College of Optoelectronic Engineering, Chongqing University, Key Laboratory for Optoelectronic Technology and Systems, Ministry of Education, Chongqing University, Chongqing, China, Chongqing, China

10:10 Wed 6. Jul

ANN based tensile force estimation using embedded EM sensor

J. Kim*, B. Yu, H. Lee, S. Park

*Sungkyunkwan University, Suwon, South Korea

10:30 Wed 6. Jul

Advanced monitoring system applied to Colle Isarco viaduct

C. Cappelloˆ, A. Beltempo*, A. Bonelli, C. Costa, D. Bolognani, O. Bursi, D. Zonta

*Departement of Civil, Environmental and Mechanical Engineering, University of Trento, Trento, Italy

10:30 Tue 5. Jul

Pre- and post- damage structural health monitoring in carbon fiber textile reinforced concrete (TRC) structures

Y. Goldfeld*, T. Quadflieg, T. Gries

*Faculty of Civil and Environmental Engineering, Technion - Israel Institute of Technology, Haifa, Israel

10:50 Tue 5. Jul

Recognition of Rebar and Crack Based on Impact-Echo Phase Analysis

P. Liu, P. Yeh, L. Lin, Y. Hsu*, C. Yeh

*National Taiwan University, NTU, Taipei, Taiwan, Republic of China

11:10 Tue 5. Jul

Narrow-band diffuse ultrasonic wave field measurements in a network of reciprocal transducers for monitoring of a large concrete floor slab

P. Fröjd*, P. Ulriksen

*Engineering Geology, Lund University, Lund, Sweden

11:30 Tue 5. Jul

Moisture in screed: a non-destructive multi-sensor approach

C. Strangfeld*, S. Kruschwitz, J. Wöstmann, S. Nagel, F. Hase

*8.2 Non-Destructive Damage Assessment and Environmental Measurement Methods, Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany

11:50 Tue 5. Jul

The sensitivity of coda wave interferometry in different scattering regimes

P. Fröjd*, P. Ulriksen

*Engineering Geology, Lund University, Lund, Sweden

14:00 Tue 5. Jul

Moisture measurements with RFID based sensors in screed and concrete

C. Strangfeld*, S. Johann, M. Müller, M. Bartholmai

*8.2 Non-Destructive Damage Assessment and Environmental Measurement Methods, Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany

14:20 Tue 5. Jul

The use of electromechanical impedance based structural health monitoring technique in concrete structures

R. Silva, K. Tsuruta*, D. Rabelo, R. Finzi Neto, V. Steffen Jr.

*School of Mechanical Engineering, FEDERAL UNIVERSITY OF UBERLÂNDIA (UFU), UBERLÂNDIA, Brazil

14:40 Tue 5. Jul

Design of Embedded Piezoelectric Transducers for Structural Health Monitoring in concrete structures.

C. Dumoulin*, A. Deraemaeker

*Building, Architecture and Town Planning (BATir), Université Libre de Bruxelles (ULB), Brussels, Belgium

15:00 Tue 5. Jul

Active Structural Health Monitoring of Reinforced Concrete Structures using Piezoelectric Smart Aggregates

T. Nestorovic*, D. Stojic, N. Markovic

*Mechanics of Adaptive Systems, Ruhr University Bochum, Bochum, Germany

15:20 Tue 5. Jul

Monitoring of Unsaturated Moisture Flow in Cement-based Materials with Electrical Capacitance Tomography

A. Voss*, M. Pour-Ghaz, M. Vauhkonen, A. Seppänen

*Department of Applied Physics, University of Eastern Finland (UEF), Kuopio, Finland

15:40 Tue 5. Jul

Thermal imaging coupled with high-definition colour imaging for defect localisation and quantification

B. Guldur

Department of Civil Engineering, Hacettepe University, Ankara, Turkey

11:00 Wed 6. Jul

Validation of a physical model for rolling element bearings with diagnosis purposes

U. Leturiondo*, O. Salgado, D. Galar

*IK4-Ikerlan, Arrasate-Mondragón, Spain

11:20 Wed 6. Jul

Condition monitoring of bearings under medium and low rotational speed

C. Freitas*, P. Morais, J. Cuenca, A. Ompusunggu, M. Sarrazin, K. Janssens

*Siemens Industry Software NV, Leuven, Belgium

11:40 Wed 6. Jul

Diagnostic approaches for epicyclic gearboxes condition monitoring

Z. Dworakowski*, A. Jablonski, P. Kijanka, K. Dziedziech, T. Uhl

*Department of Robotics and Mechatronics, AGH University of Science and Technology, Krakow, Poland

12:00 Wed 6. Jul

Frequency-based damage detection of spur gear using wavelet analysis

S. Wirtz*, N. Beganovic, P. Tenberge, D. Söffker

*University of Duisburg-Essen, Chair of Dynamics and Control, Duisburg, Germany

12:20 Wed 6. Jul

Tip timing measurements for Structural Health Monitoring in a low-pressure turbine using three optical sensors

I. García*, J. Zubiaˆ, J. Beloki, I. Ayesta, G. Aldabaldetreku

*Department of Communications Engineering, University of the Basque Country (UPV/EHU), Bilbao, Spain

09:00 Thu 7. Jul

A formal approach to structural health monitoring design

C. Cappello*, D. Sigurdardottir, B. Glisic, D. Zonta, M. Pozzi

*Department of civil, environmental and mechanical engineering, University of Trento, Trento, Italy

09:30 Thu 7. Jul

Quantifying the value of seismic monitoring for the building owner

P. Omenzetter*, M. Limongelliˆ, U. Yazgan

*The University of Aberdeen, Aberdeen, United Kingdom

09:50 Thu 7. Jul

Damage Detection Reliability Determination for Structural Systems

M. Döhler*, S. Thöns

*Inria, Rennes, France

10:10 Thu 7. Jul

The Influence of Brittle Daniels System Characteristics on the Value of Load Monitoring Information

S. Thöns*, R. Schneider

*Department of Civil Engineering, Technical University of Denmark, Kgs. Lyngby, Denmark

11:00 Thu 7. Jul

Long-term performance of prestressed concrete bridges

H. Sousa*, L. Santos

*Civil & Environmental Engineering, University of Surrey, Guildford, United Kingdom

11:20 Thu 7. Jul

Performance evaluation of a suspension bridge excited by wind and traffic induced action

J. Snaebjoernsson*, E. Cheynet, J. Bogunovic Jakobsen

*School of Science and Engineering, Reykjavik University (RU), Reykjavík, Iceland

11:40 Thu 7. Jul

Illustrating the relevance of SHM in a case study: the Foz Tua centenary railway bridge

F. Magalhães*, J. Pacheco, Á. Cunha

*Civil Engineering, Faculty of Engineering, University of Porto, Porto, Portugal

12:00 Thu 7. Jul

Development of key performance indicators for the structural assessment of heritage buildings

M. Masciotta*, L. Ramos, P. Lourenço, J. Matos

*Department of Civil Engineering, University of Minho, Guimaraes, Portugal

12:20 Thu 7. Jul

Adaptive Energy Consumption Optimization Using IoT-based Wireless Sensor Networks and Structural Health Monitoring Systems

G. Cimellaro*, E. Sheikhi, S. Mahin

*Department of Structural, Geotechnical & Building Engineering (DISEG), Politecnico di Torino, Turin, Italy

14:00 Thu 7. Jul

A novel bi-component Structural Health Monitoring strategy for deriving global models of operational Wind Turbines

S. Bogoevska*, M. Spyridonakos, E. Chatzi, E. Dumova-Jovanoska, R. Höffer

*Structural Analysis, Saints Cyril and Methodius University of Skopje, Civil Engineering Faculty, Skopje, Macedonia

14:20 Thu 7. Jul

Validation of joint input-state estimation for force identification and response estimation in structural dynamics

K. Maes*, K. Van Nimmen, E. Lourens, A. Rezayat, P. Guillaume, G. De Roeck, G. Lombaert

*Civil Engineering Department, KU Leuven, Leuven, Belgium

14:40 Thu 7. Jul

Towards extraction of vibration-based damage indicators

M. Limongelli*, E. Chatzi, M. Döhler, G. Lombaert, E. Reynders

*Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano, Milano, Italy

15:00 Thu 7. Jul

Structural Health Monitoring through Video Recording

M. Zimmermannˆ, U. Gülan, Y. Harmanci*, E. Chatzi, M. Holzner

*Institute of Structural Engineering, Swiss Federal Institute of Technology, Zurich (ETH Zurich), Zurich, Switzerland

15:20 Thu 7. Jul

Identification of modal strains of a pre-stressed concrete beam during progressive damage testing

D. Anastasopoulos*, K. De Wilder, B. De Pauw, U. Nawrot, T. Geernaert, G. De Roeck, F. Berghmans, L. Vandewalle, E. Reynders

*Department of Civil Engineering, KU Leuven, Leuven, Belgium

15:40 Thu 7. Jul

Signal Processing for Time Domain Analysis of Impact Hammer Test Data

A. Ay, Y. Wang*, S. Khoo

*Department of Civil and Environmental Engineering, University of Surrey, Guildford, United Kingdom

10:30 Tue 5. Jul

Defect quantification in 3D Angle Interlock Glass Fibre Composites using Acoustic Emission

M. Gresil*, M. Saleh, M. Arshad, C. Soutis

*University of Manchester, Manchester, United Kingdom

10:50 Tue 5. Jul

Identification of diagnostic and prognostic features by means of AE and hydraulic pressure measurements

N. Beganovic*, S. Rothe, D. Söffker

*Chair of Dynamics and Control, University of Duisburg-Essen, Duisburg, Germany

11:10 Tue 5. Jul

Impact Damage Assessment of Multi-Layered Composite Structures in Service by Acoustic Emission Source Location Analysis

D. Yoon*, B. Han, I. Kim, C. Park, I. Kwon

*Korea Research Institute of Standards and Science (KRISS), Daejeon, South Korea

11:30 Tue 5. Jul

Experimental results of frequency-based classification of damages in composites

S. Wirtz*, N. Beganovic, D. Söffker

*University of Duisburg-Essen, Chair of Dynamics and Control, Duisburg, Germany

11:50 Tue 5. Jul

Guided wave propagation modelling to aid understanding of acoustic emission system performance on complex aerospace structures

M. Courtier*, A. Croxford, K. Atherton

*Mechanical Engineering, University of Bristol, Bristol, United Kingdom

12:10 Tue 5. Jul

New methods for onset detection of acoustic emission signals

D. Gagar*, F. Bai, Y. Zhao, P. Foote

*School of Aerospace, Transport and Manufacturing, Cranfield University, Cranfield, United Kingdom

09:00 Thu 7. Jul

Damage Localization from Free Vibration Signals

D. Bernal*, Y. Zhang

*Civil and Environmental Engineering, Northeastern University, Boston, USA

09:30 Thu 7. Jul

Numerical investigations of non-linear acoustics/ultrasonics for damage detection

A. Singh*, B. Chen, V. Tan, T. Tay, H. Lee

*Department of Mechanical Engineering, National University of Singapore (NUS), Singapore, Singapore

09:50 Thu 7. Jul

A SHM method for identifying damage based on VARX modelling and substructuring approach

U. Ugalde*, J. Anduaga, F. Martínez, A. Iturrospe

*Control and Monitoring, IK4-Ikerlan Research Centre, 20500, Spain

10:10 Thu 7. Jul

A baseline-free damage detection method based on node displacement in mode shape

T. Huang*, M. Chaves-Vargas, J. Yang, K. Schröder

*Institute of Structural Mechanics and Lightweight Design, RWTH Aachen, Aachen, Germany

11:00 Thu 7. Jul

Parameter uncertainties quantification for subspace fitting approaches

G. Gautier*, L. Mevel, J. Mencik, M. Döhler, R. Serra

*Atomic Energy and Alternative Energies Commission (CEA-Tech), Bouguenais, France

11:20 Thu 7. Jul

Kalman Filter based Neutral Axis tracking under varying temperature conditions

R. Soman*, K. Majewska, M. Mieloszyk, P. Malinowski, W. Ostachowicz

*Institute of Fluid Flow Machinery, PASci, Gdansk, Poland

11:40 Thu 7. Jul

Finite Element Verification of the Method of Neutral Axis for Damage Detection in Composite Beam Structures

X. Li, B. Glisic*

*Civil and Environmental Engineering, Princeton University, Princeton, USA

12:00 Thu 7. Jul

Identification of structural changes using symbolic representations of modal quantities

J. Santos*, J. Mata, C. Crémona, P. Silveira

*Structures Department, National Laboratory for Civil Engineering (LNEC), Lisbon, Portugal

14:00 Thu 7. Jul

SHM-based fatigue damage prognostics in composite structures

L. Cot*, F. Gamboa, C. Gomez Jimenez, F. Kopsaftopoulos, F. Chang

*Institut National des Sciences Appliquées, Université de Toulouse, Institut Clément Ader (ICA), Toulouse, France

14:20 Thu 7. Jul

Output-only damage detection in beam structures using statistical analysis of Hilbert-Huang Transformation of measured response

M. Khosraviani*, M. Ghasemi

*Department of Civil Engineering, Qazvin Islamic Azad University, Qazvin, Iran

14:40 Thu 7. Jul

Semantic Analysis of Alarm Response Entries for Plant Health Monitoring

M. Asher*, P. Hutchinson

*Aerospace Engineering, University of Bristol, Bristol, United Kingdom

15:00 Thu 7. Jul

Baseline-free fatigue crack imaging using nonlinear vibro-acoustic modulation

C. Wang*, J. Guinto, F. Rose, M. Veidt, W. Chiu, H. Sohn

*RMIT University, Melbourne, Australia

15:20 Thu 7. Jul

DELORES - A System for Detection and Localization of Structural Damages

R. Johansen*, M. Ulriksen, L. Damkilde

*Department of Civil Engineering, Aalborg University, Esbjerg, Denmark

15:40 Thu 7. Jul

Effective Damage Detection of Block Mass Type Damage in an Isotropic Plate using a Refined Time-Reversed Lamb Wave Technique

J. Agrahari*, S. Kapuria

*Department of Applied Mechanics, Indian Institute of Technology Delhi, New Delhi, India

14:00 Wed 6. Jul

Output-only fatigue prediction of uncertain steel structures

V. Dertimanis*, S. Eftekhar Azam, E. Chatzi, C. Papadimitriou

*ETH Zürich, Zürich, Switzerland

14:20 Wed 6. Jul

A novel approach towards fatigue damage diagnostics and prognostics of composite materials utilizing SHM data and stochastic degradation modeling

T. Loutas*, N. Eleftheroglou

*University of Patras, Greece, Patras, Greece

14:40 Wed 6. Jul

Real Time Fatigue Detection in Structures by Means of Strain Field Pattern Recognition

J. Sierra*, A. Guemes, A. Cuervo, F. Amaya, J. Álvarez

*Engineering School, Universidad Pontificia Bolivariana (UPB), Medellin, Colombia

15:00 Wed 6. Jul

Monitoring of a bridge gusset plate during crack propagation with different measurement systems

S. Chowdhury*, V. Zabel

*Civil Engineering, Bauhaus University weimar, Weimar, Germany

15:20 Wed 6. Jul

Rapidly Deployable Wireless Hull Monitoring System for Fatigue Life Assessment of Naval Vessels in High Seas

N. Johnson*, S. O'Connor, A. Magnus, M. Collette, J. Lynchˆ

*Civil & Environmental Engineering, Electrical Engineering & Computer Science, Naval Architecture & Marine Engineering, University of Michigan, Ann Arbor, USA

15:40 Wed 6. Jul

A nonlinear ultrasonic stimulated thermography method for detecting fatigue cracks

G. Malfense Fierro*, D. Calla, D. Ginzburg, F. Ciampa, M. Meo

*Mechanical Engineering, University of Bath, Bath, United Kingdom

16:30 Wed 6. Jul

Dynamic Response Estimation and Fatigue Prediction in a Linear Substructure of a Complex Mechanical Assembly

D. Giagopoulos*, A. Arailopoulos, S. Eftekhar Azam, C. Papadimitriou, E. Chatzi, K. Grompanopoulos

*Department of Mechanical Engineering, University of Western Macedonia, Kozani, Greece

16:50 Wed 6. Jul

Fatigue crack modelling for damage detection

J. Kullaa*, M. Miettinenˆ

*Helsinki Metropolia University of Applied Sciences, Metropolia, Finland

17:10 Wed 6. Jul

Removal of temperature-induced strain variations for fatigue crack detection in a real aeronautical structure

M. Corbetta*, C. Sbarufatti, E. Cross, M. Giglio

*Dipartimento di Meccanica, Politecnico di Milano (PoliMi), Milan, Italy

17:30 Wed 6. Jul

Damage Precursor Index (DPI) Methodology for Metallic Structures

E. Habtour*, D. Cole, C. Kube, M. Robeson, A. Dasgupta

*Vehicle Technology Directorate, U.S. Army Research Laboratory, APG, USA

10:30 Tue 5. Jul

INVITED PAPER: Overview of Rayleigh-Based High Definition Distributed Fiber Optic Sensing for Structural Testing and Health Monitoring Applications

B. Soller

Luna Innovations, Blacksburg, USA

10:50 Tue 5. Jul

Demonstration and methodology of structural monitoring of hidden composite areas by embedded optical fiber sensors and connectors

C. Miguel Giraldo*, J. Zúñiga Sagredo, L. Garcia Vazquez, J. Cardenas Aguado

*Materials & Processes, Airbus Operations, Madrid, Spain

11:10 Tue 5. Jul

A Numerical Study for Damage Detection of a Thin Plate Using Macro-Strain Measurement

T. Hsu*, W. Liao, Y. Shi

*National Center of Research on Earthquake Engineering (NCREE), Taipei, Taiwan, Republic of China

11:30 Tue 5. Jul

Parameter identification based on quasi-continuous strain data captured by high resolution fiber optic sensing

A. Künzel*, Y. Petryna

*Chair of Structural Mechanics, Technische Universität Berlin (TU Berlin), Berlin, Germany

11:50 Tue 5. Jul

Fiber optic based HUMS concept for large aircraft structure based on both point and distributed strain sensing

I. Kressel*, M. Turˆ, M. Bosboom, R. Evenblij, P. Michaelides, U. Ben-Simon, N. Gorbatov, A. Bergman, N. Kontis, C. Koimtzoglou

*Israel Aerospace Industries (IAI), Tel Aviv, Israel

12:10 Tue 5. Jul

Fiber Optic Based In-Flight Structural Health Monitoring (SHM) Implemented on a Gearbox Support Beam of a Helicopter

O. Shapira*, S. Shoham, U. Ben-Simon, N. Gorbatov, B. Glam, V. Kalmanovich, T. Yehoshua, I. Kresselˆ, M. Tur

*Technion Institute of Technology, Haifa, Israel

14:00 Tue 5. Jul

Properties of optical fibers and FBG sensors and strain monitoring of the composite structures

M. Ruzicka*, M. Dvorak

*Dpt. of mechanics, biomechanics and mechatronics, Czech Technical University in Prague, Fac. of Mech. Eng., Praha 4, Czech Republic

14:20 Tue 5. Jul

Bond strength and performance of optical fibre Bragg Grating sensors embedded in composite patch repairs for military aircrafts

T. Jonesˆ, T. Thorvaldsen*, G. Sagvolden, K. Pran, T. Olsen

*Land Systems Division, Norwegian Defence Research Establishment (FFI), Kjeller, Norway

14:40 Tue 5. Jul

Robust integration of optical fiber sensors for aerospace applications in composite material structures

M. Frövel*, J. Pintado, G. Carrión, F. Cabrerizo, F. Terroba, T. Buck, A. Reutlinger, J. San Millán

*Composite Materials, Spanish Institue for Aerospace Technology (INTA), Torrejón de Ardoz, Spain

15:00 Tue 5. Jul

Fiber Optic Sensors for Multiparameter Monitoring Of Large Scale Assets

D. Karabacak*, M. Farnan, S. Ibrahim, M. Todd, J. Singer

*Fugro Technology B.V., Leidschendam, Netherlands

15:20 Tue 5. Jul

Local Strain Monitoring of Fiber Reinforced Composites under High Strain Fatigue using Embedded FBG Sensors

A. Suleman*, E. Kocaman, E. Akay, C. Yilmaz, H. Turkmen, I. Misirlioglu, M. Yildiz

*Mechanical Engineering, University of Victoria, Victoria, Canada

15:40 Tue 5. Jul

Application of Biaxial FBG Sensors to Monitor Poisson’s Ratio of Composites as Damage Index

A. Suleman*, C. Yilmaz, C. Akalin, E. Kocaman, M. Yildiz

*Mechanical Engineering, University of Victoria, Victoria, Canada

16:30 Tue 5. Jul

Investigation of the performance in dynamic strain measurements of distributed fiber optic sensors

H. Murayama*, K. Kageyama, T. Matsuo, T. Tamaoki, F. Fujimori, K. Shiotsubo, D. Wada, H. Igawa

*School of Engineering, The University of Tokyo, Tokyo, Japan

16:50 Tue 5. Jul

A curvature based approach in dynamic monitoring using long-gage fiber optic sensors

K. Kliewer*, B. Glisic

*Civil and Environmental Engineering, Princeton University, Princeton, USA

17:10 Tue 5. Jul

Fibre optic sensors structural health monitoring of the central beam pipe in the CMS experiment at the CERN laboratories

F. Fienga*, G. Breglio, S. Buontempo, Z. Szillasi, N. Beni, A. Gaddi, A. Gaddi, A. Cusano, M. Consales, M. Giordano

*Department of Information Technology and Electrical Engineering (DIETI), University of Naples Federico II (UNINA), Napoli, Italy

17:30 Tue 5. Jul

Assessment of a multicore optical fibre interferometer for strain sensing in aerospace structures

O. Arrizabalaga*, J. Villatoro, G. Durana, I. García, A. Montero, E. Antonio-Lopez, A. Schülzgen, R. Amezcua Correa, J. Zubia, I. Sáez de Ocáriz

*University of the Basque Country (UPV/EHU), BILBAO, Spain

17:50 Tue 5. Jul

Model-assisted performance qualification of a distributed SHM system for fatigue crack detection on a helicopter tail boom

C. Sbarufatti*, M. Corbetta, J. San Millán, M. Frövel, M. Stefaniuk, M. Giglio

*Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy

18:10 Tue 5. Jul

Ultrasonic strain wave acquisition by a low-cost fiber optic coherent sensor for structural health monitoring applications

C. Sbarufatti*, L. Martinelli, M. Mattarei, M. Ferrario, M. Giglio

*Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy

18:30 Tue 5. Jul

Free-edge delamination location and growth montoring with an embedded distributed fiber optic network

P. Fernández Díaz-Maroto*, A. Fernández López, A. Güemes, B. Larrañaga

*Center of Composite Materials and Smart Structures, Polytechnical University of Madrid (UPM), Madrid, Spain

09:30 Wed 6. Jul

Exploring the performance limits of full-field acoustic wavenumber spectroscopy techniques for damage detection through numerical simulation

N. O'Dowdˆ, D. Han, L. Kang, E. Flynn*

*Engineering Institute, Los Alamos National Laboratory, Los Alamos, USA

09:50 Wed 6. Jul

Lamb wave excitation and detection with piezoelectric elements: Essential aspects for a reliable numerical simulation

S. Gschoßmann*, C. Humer, M. Schagerl

*Institute of Constructional Lightweight Design, Johannes Kepler University Linz, Linz, Austria

10:10 Wed 6. Jul

Passive guided wave tomography for corrosion detection

T. Druet*, B. Chapuis, E. Moulin

*French Alternative Energies and Atomic Energy Commission (CEA LIST), Gif sur Yvette, France

11:00 Wed 6. Jul

Spectral Finite Element Methods in Condition Monitoring and Damage Detection

A. Żak*, M. Krawczuk, Ł. Doliński, M. Palacz

*Electrical and Control Engineering, Gdansk University of Technology, Gdańsk, Poland

11:20 Wed 6. Jul

Online damage evaluation using Guided wave based Hidden Markov Model

J. Zhangˆ, S. Yuan*, H. Mei, L. Qiu

*Research Center of Structural Health Monitoring and Prognosis, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics (NUAA), Nanjing, China

11:40 Wed 6. Jul

A Lamb Wave-based Crack Diagnosis Method Using An Improved RAPID Algorithm

Q. Wang*, M. Wang, D. Yue, Z. Su

*School of Automation, Nanjing University of Posts and Telecommunications, Nanjing, China

12:00 Wed 6. Jul

Feature selection techniques for identifying the most relevant damages indices in SHM using Guided waves

M. El Mountassir*, S. Yaacoubi, G. Mourot, D. Maquin

*CND, Institut de Soudure, Thionville, France

12:20 Wed 6. Jul

Studies on data correction of Structural Health Monitoring using ultrasonic guided waves: case of study

M. El Mountassir*, S. Yaacoubi, G. Mourot, D. Maquin

*CND, Institut de Soudure, Thionville, France

14:00 Wed 6. Jul

Robust mixed finite element simulations of interactions of ultrasonic waves with cracks

D. Lukas

Department of Applied Mathematics, FEECS, VSB-Technical University of Ostrava, Ostrava, Czech Republic

14:20 Wed 6. Jul

Development of an SHM system of sandwich composite panels using guided elastic waves

B. Chapuis*, A. Kulakovskyi, N. Bedreddine, O. D'Almeida

*NDE Department, French Alternative Energies and Atomic Energy Commission (CEA LIST), Gif-sur-Yvette, France

14:40 Wed 6. Jul

Defect detection in pipes based on the measurement of surface displacements

P. Becht*, E. Deckers, C. Claeys, B. Pluymers, W. Desmet

*Department of Mechanical Engineering - PMA, KU Leuven (KUL), Leuven, Belgium

15:00 Wed 6. Jul

Wave Scattering Analysis in a ACSR Cable Using Piezoelectric Transducers

S. Malo Peces*, M. Livadas, C. Selcuk, T. Gan, C. Mares

*Brunel Innovation Centre (BIC), Brunel University London, Uxbridge, United Kingdom

15:20 Wed 6. Jul

Reliability Aspects of Lamb Wave Interaction at Impact Damages in Complex Stiffened CFRP Structures

B. Eckstein*, M. Moix Bonet, M. Bach, N. Dobmann

*Airbus Group Innovation, Bremen, Germany

15:40 Wed 6. Jul

An experimental study on the scattering of edge-guided waves by a small edge crack in an isotropic plate.

B. Vien*, F. Roseˆ, W. Chiu

*Department of Mechanical and Aerospace Engineering, Monash University, Clayton, Australia

16:30 Wed 6. Jul

Ultrasonic Guided waves Communications in smart materials: the case of tapered waveguides

L. De Marchi*, A. Marzani, J. Moll

*University of Bologna, Bologna, Italy

16:50 Wed 6. Jul

Ultrafast Wave Finite Element Method for the computation of dispersion properties in periodic viscoelastic waveguides

A. Palermo*, A. Marzani

*Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Bologna, Italy

17:10 Wed 6. Jul

Fast Approximation of Wave Propagation in Complex Geometries

C. Heinze*, M. Sinapius, P. Wierach

*German Aerospace Center (DLR), Institute of Composite Structures and Adaptive Systems, Hamburg, Germany

17:30 Wed 6. Jul

An experimental and computational study of Lamb wave scattering by edge delaminations around circular holes.

N. Nadarajah*, L. Roseˆ, W. Chiu

*Mechanical and Aerospace, Monash Univeristy, Melbourne, Australia

17:50 Wed 6. Jul

Material elastic waves test exploitation in benefit of composite structure health monitoring

Á. Lozano-Martín*, R. Marcos-García, J. García-Alonso, A. Fernández-López, M. Iglesias, A. Güemes

*Department of Aerospace Materials and Manufacturing, Polytechnical University of Madrid (UPM), Madrid, Spain

09:00 Thu 7. Jul

Practical guided wave SHM of pipes – processing multiple data sets to give reliable defect detection

P. Cawley*, C. Liu

*Mechanical Engineering, Imperial College London, London, United Kingdom

09:30 Thu 7. Jul

The Benefits of Long Range Ultrasonic Sensors for the Efficient InLine Inspection and Corrosion Monitoring of Previously Non-piggable or Hard to Reach Pipelines

Á. Angulo*, S. Soua, T. Gan, A. Thoma, E. Kosmidis

*Condition and Structural Health Monitoring, TWI Ltd, Cambridge, United Kingdom

09:50 Thu 7. Jul

Analytically based time-reversal technique for damage localization and characterization in laminate composite structures

A. Eremin*, E. Glushkov, N. Glushkova, R. Lammering

*Institute for Mathematics, Mechanics and Informatics, Kuban State University, Krasnodar, Russia

11:00 Thu 7. Jul

A Structural Health Monitoring Approach based on Contact Acoustic Nonlinearity and Its Application to Quantitative Evaluation of Fatigue Cracks

K. Wang, Z. Su*

*Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong, Hong Kong, China

11:20 Thu 7. Jul

Damage Identification using Guided Waves on a Composite Skin-Stiffener Structure

R. Loendersloot*, M. Battley, T. Tinga

*Engineering Technology, University of Twente, Enschede, Netherlands

11:40 Thu 7. Jul

Damage detection in composite materials

T. Wandowski*, P. Kudela, P. Malinowski, L. Sarniak, R. Karczewski, W. Ostachowicz

*Institute of Fluid-Flow Machinery PAS, Gdansk, Poland

12:00 Thu 7. Jul

Analysis of the propagation of ultrasonic waves along isotropic and non-isotropic materials using Pamela portable SHM system

J. Etxaniz*, L. Ambrozinski, G. Aranguren

*Electronic Technology, University of the Basque Country, Bilbao, Spain

10:30 Tue 5. Jul

Predictive simulation of guided wave SHM with piezoelectric wafer active sensors

V. Giurgiutiu

UNIVERSITY OF SOUTH CAROLINA, Columbia, USA

10:50 Tue 5. Jul

Guided Wave-Gaussian Mixture Model based Damage Evaluation Method under Time-Varying Condition and Its Validation in a Full-Scale Aircraft Fatigue Test

L. Qiu*, S. Yuan, H. Mei, F. Fang

*The State Key Lab of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics (NUAA), Nanjing, China

11:10 Tue 5. Jul

Guided Wave-based Damage Localization in Isotropic Structures with Smoothly Varying Thickness

J. Moll

Goethe-University Frankfurt am Main, Frankfurt am Main, Germany

11:30 Tue 5. Jul

Modified Time Reversal Imaging of Partially Closed Crack Based on Linear and Nonlinear Wave Response

P. Blanloeuil*, C. Wang, M. Veidt, F. Rose

*School of Mechanical & Mining Engineering, University of Queensland, Brisbane, Australia

11:50 Tue 5. Jul

Vibro-acoustic fault detection using a numerical time reversal method with reduced order models

S. Van Ophem*, E. Deckers, O. Atak, W. Desmet

*Mechanical Engineering, KU Leuven, Leuven, Belgium

12:10 Tue 5. Jul

Ultrasonic Techniques Based Inversion of Elastic Properties for a Single Lamina in Composites Laminates

J. Zhao*, J. Qiu, H. Ji

*Nanjing University of Aeronautics and Astronautics, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing, China

14:00 Tue 5. Jul

Empirical technique for dispersion curve creation for guided wave applications

B. Hernandez-Crespo*, B. Engineer, C. Courtney

*The Welding Institute [TWI], Cambridge, United Kingdom

14:20 Tue 5. Jul

Numerical Simulation of the Cumulative Higher Harmonic Generation in Unidirectional Composites

N. Rauter*, R. Lammering

*Institute of Mechanics, Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg (HSU), Hamburg, Germany

14:40 Tue 5. Jul

Investigation into Lamb wave boundary reflections in aluminium plates for defect characterisation and image reconstruction, with application to structural health monitoring.

A. Muller*, B. Robertson-Welsh, M. Gresil, P. Gaydecki, C. Soutis

*Faculty of Engineering and Physical Sciences, Aerospace Research Institute, The University of Manchester, Manchester, United Kingdom

15:00 Tue 5. Jul

Enhancement the estimation of damage severity by using guided wave diffraction resonance phenomena

E. Glushkov, N. Glushkova, A. Eremin*, R. Lammering

*Institute for Mathematics, Mechanics and Informatics, Kuban State University, Krasnodar, Russia

15:20 Tue 5. Jul

Wave Propagation Analysis in Composite Plates using a Novel Finite Wavelet Domain Method

D. Saravanos*, C. Nastos, T. Theodosiou, C. Rekatsinas

*Dept. of Mechanical Engineering and Aeronautics, University of Patras, Rion-Patras, Greece

15:40 Tue 5. Jul

Identification of Impact Events on Composite Plates using Wave Characteristics and Impact Similarity Models

D. Saravanos*, T. Theodosiou, C. Rekatsinas, C. Nastos, M. Iglesias Vallejo, J. Garcia Alonso

*Dept. of Mechanical Engineering and Aeronautics, University of Patras, Rion-Patras, Greece

16:30 Tue 5. Jul

Assessment of correlation-based imaging technique on composites

P. Ostiguy*, N. Quaegebeur, P. Masson

*Université de Sherbrooke, Sherbrooke, Canada

16:50 Tue 5. Jul

Numerical Study of Rayleigh Wave Based Interfacial Debonding Detection between FRP Plate and Steel Beam

Y. Xu*, B. Li

*Harbin Institute of Technology Shenzhen Graduate School, Shenzhen, China

10:30 Tue 5. Jul

Defect triangulation via demixing algorithms based on dictionaries with different morphological complexity

J. Druce, S. Gonella*, M. Kadkhodaie, S. Jain, J. Haupt

*Civil, Environmental, and Geo-Engineering, University of Minnesota, Minneapolis, USA

10:50 Tue 5. Jul

Heat transfer 1D modeling for Non Destructive Testing and Structural Health Monitoring for civil engineering structures improved by GPGPU

A. Crinière*, J. Dumoulin, L. Mevel

*I4S Team, Inria, Rennes, France

11:10 Tue 5. Jul

Automatic crack detection on pressed panels using camera image processing

C. Lee*, H. Jung, G. Park

*Mechanical engineering, chonnam national university, Gwangju, South Korea

11:30 Tue 5. Jul

dynamic displacement measurement of a long-span bridge using vision-based system

Y. Xu*, J. Brownjohn, D. Hester, K. Koo

*College of Engineering, Mathematics and Physical Sciences, university of exeter, Exeter, United Kingdom

11:50 Tue 5. Jul

Noncontact 3D measurement system for furnace wall maintenance support

M. Ryu*, H. Sakamoto, Y. Ohbuchi, E. Nakamachi, Y. Nakamura, T. Yoshida

*Graduate School of Engineering and Technology, Kumamoto University, Kumamoto, Japan

12:10 Tue 5. Jul

Vision-based multi-point displacement measurement for SHM

D. Feng*, M. Fengˆ

*Columbia University, New York, USA

14:00 Thu 7. Jul

‘JASTAC – Japanese SHM Technologies for Aircraft Composite’ - A Project Resumé from Airbus Side

C. Bockenheimer*, C. De Miguel, P. Zahlen, C. Paget, A. Weisser

*AIRBUS Operations, Bremen, Germany

14:20 Thu 7. Jul

Outline of the Japanese National Project on Structural Health Monitoring System for Aircraft Composite Structures and JASTAC Project

A. Isoe*, H. Kojima, K. Enomoto, N. Takeda

*SOKEIZAI CENTER, KASHIWA, Japan

14:40 Thu 7. Jul

Development Overview of a Distributed Strain Sensing Technology Using Optical Fiber Sensors for Aircraft Structures

N. Saito*, T. Yari, K. Enomoto

*Mitsubishi Heavy Industries, LTD., Nagoya, Japan

15:00 Thu 7. Jul

Optical Fiber Sensor based Impact Detection System for Aircraft Structures

A. Kuraishi*, H. Mamizuˆ, Y. Nakamura, T. Wakayama, N. Takeda, K. Enomoto, H. Kojima, A. Isoe

*Kawasaki Heavy Industries (KHI), Kakamigahara, Japan

15:20 Thu 7. Jul

Development of FBG-MFC hybrid SHM system for aircraft composite structures in collaboration study with Airbus

K. Takahashi*, H. Soejima, M. Hiraki, N. Takeda, H. Kojima

*Structural analysis & test section, Engineering research & laboratories deprt. Aerospace company, Fuji Heavy Industries ltd., Utsunomiya-city, Japan

15:40 Thu 7. Jul

Life Cycle Monitoring and Quality Control of Aerospace Composite Structures

N. Takeda*, S. Minakuchi

*Graduate School of Frontier Sciences, The University of Tokyo, Kashiwa-shi, Japan

14:00 Thu 7. Jul

Application of Principles of Artificial General Intelligence in Structural Health Monitoring

A. Serov

Research Group of Automatic Intelligent Data Acquisition [RG AIDA], Moscow, Russia

14:20 Thu 7. Jul

A novel approach to damage classification based on bispectral analysis and neural network

M. Civera*, L. Zanotti Fragonaraˆ, C. Surace

*Department of Structural, Building and Geotechnical engineering, Polytechnic of Turin, Turin, Italy

15:00 Thu 7. Jul

Damage localization using modal submatrix scaling factor and neural network

M. Torbol*, K. Park, D. Darsono

*School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology, Ulsan, South Korea

15:20 Thu 7. Jul

An assessment of the effect of random noise in the frequency measurements of a vibration-based SHM system with Artificial Neural Network damage predictor

V. Ramírez*, J. Hermida, D. Huertos, B. Sánchez, D. Garijo

*Safran Engineering Services, Madrid, Spain

15:40 Thu 7. Jul

Machine learning algorithms for structural health monitoring

K. Smarsly*, K. Dragosˆ, S. Chowdhury, J. Wiggenbrock

*Civil Engineering, Bauhaus University Weimar, Weimar, Germany

10:30 Tue 5. Jul

Initial integration of structural health monitoring of self-healing materials

N. Salowitz*, P. Rohatgi, S. Suri, A. Correa

*Mechanical Engineering, University of Wisconsin - Milwaukee, Milwaukee, USA

10:50 Tue 5. Jul

Numerical Characterization of Mechanochromic Photonic Crystals for Structural Health Monitoring

V. Piccolo, A. Piotrowska, A. Chiappini, A. Chiappini, A. Vaccari, M. Ferrari, L. Deseri, D. Zonta*

*​Civil and Environmental Engineering, University of Strathclyde, Glasgow, United Kingdom

11:10 Tue 5. Jul

Electrical impedance tomography to monitor unsaturated moisture flows, and to detect corrosive elements and cracking in cementitious materials

A. Seppänen*, M. Hallaji, D. Smyl, M. Pour-Ghaz

*Department of Applied Physics, University of Eastern Finland, Kuopio, Finland

11:30 Tue 5. Jul

Contactless detachment identification in frescoes utilizing a Scanning Laser Doppler Vibrometer

C. Providakis*, M. Mousteraki, S. Tsistrakis, V. Liarakos

*School of Architecture, Technical University of Crete, CHANIA, Greece

11:50 Tue 5. Jul

Tensile Failure Analysis of Structural Materials using Acoustic Emission

J. Mowatˆ, S. Jihan, M. Droubi*

*Engineering, Robert Gordon University RGU, Aberdeen, United Kingdom

14:00 Wed 6. Jul

Large deformation piezoresistive sensors based in thermoplastic elastomers matrixes and nanoparticles reinforcement

S. Lanceros-mendez*, P. Costa, J. Vicente, J. Abete, A. Iturrospe

*BCMaterials, Derio, Spain

14:20 Wed 6. Jul

A Coatable, Lightweight Nanocomposite Sensor for in-situ Acquisition of Ultrasonic Waves and Its Application to Embeddable Structural Health Monitoring

M. Liu, Z. Zeng, H. Xu, Z. Su*, L. Zhou, Z. Zhang

*Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong, Hong Kong, China

14:40 Wed 6. Jul

Skin-like Sensor Enabled Bridge Structural Health Monitoring System

K. Loupos*, A. Amditis, A. Tsertou, V. Kalidromitis, S. Camarinopoulos, S. Lenas, A. Anastasopoulos, K. Lenz, M. Hill, A. Adesiyun, B. Frankenstein, R. Gerhard, Y. Damigos

*Institute of Communication and Computer Systems, Athens, Greece

15:00 Wed 6. Jul

Electric 3D printed circuits using a paste extruder technology for detecting strain and damage in glass fiber laminates

J. Manzano*, M. Sánchez, J. Rams, A. Ureña

*Materials Science and Engineering Area, University King Juan Carlos (URJC), Madrid, Spain

15:20 Wed 6. Jul

Surface modification of continuous fibers with carbon nanostructures to get self-sensing capabilities

A. Jimenez-Suarez*, R. Moriche, M. Sánchez, M. Campo, S. Prolongo, A. Ureña

*Materials Science and Engineering Area, Universidad Rey Juan Carlos, Móstoles, Spain

15:40 Wed 6. Jul

Structural health monitoring in multiscale composite materials: nanoreinforced epoxy matrices and coated fabrics.

R. Moriche*, M. Sánchez, S. Prolongo, A. Jimenez-Suarez, A. Ureña

*Materials Science and Engineering Area, University Rey Juan Carlos, Móstoles, Spain

14:00 Wed 6. Jul

Modal tracking with only a few of sensors: application to a residential building

J. García-Palacios*, J. Soria, I. Díaz, F. Tirado-Andrés

*Civil Engineering, Technical University of Madrid, Madrid, Spain

14:20 Wed 6. Jul

Structural damage localization using the modal interpolation method

M. Limongelli

Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano, Milano, Italy

14:40 Wed 6. Jul

A comparative study of frequency-domain finite element updating approaches using different optimization procedures

X. Dong, Y. Wang*

*School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, USA

15:00 Wed 6. Jul

A Proposal of Mode Shape Estimation Method Using Pseudo-Modal Response : Applied to Steel Bridge in Building

D. Kim*, H. Shim, H. Park

*Department of Architectural Engineering, Yonsei University, Seoul, South Korea

15:20 Wed 6. Jul

Output-only structural health monitoring based on mean shift clustering for vibration-based damage detection

A. Santos*, M. Silva, R. Santos, E. Figueiredo, C. Sales, J. Costa

*Applied Electromagnetism Laboratory, Federal University of Pará, Belém, Brazil

15:40 Wed 6. Jul

A damage detection approach based on wavelet analysis and noise estimation of mode shapes

M. Solis*, M. Algaba, P. Galvin, A. Benjumea

*Department of Continuum Mechanics, University of Sevilla, Sevilla, Spain

16:30 Wed 6. Jul

Embedded subspace-based modal analysis and uncertainty quantification on wireless sensor platform PEGASE

V. Le Camˆ, M. Döhler*, M. Le Pen, I. Gueguen, L. Mevel

*Inria, Rennes, France

16:50 Wed 6. Jul

Structural damage detection using the estimated vibration response

M. Zhang*, R. Schmidt, B. Markert

*Institute of General Mechanics, RWTH Aachen University, Aachen, Germany

17:10 Wed 6. Jul

Assessment of sub-Nyquist deterministic and random data sampling techniques for operational modal analysis

K. Gkoktsi, A. Giaralis*

*Department of Civil Engineering, City University London, London, United Kingdom

17:30 Wed 6. Jul

On the use of Second Order Blind Identication for the characterization of the environmental influence on modal parameter estimates

C. Rainieri*, D. Gargaro, G. Fabbrocino

*Structural and Geotechnical Dynamics Laboratory, University of Molise, Campobasso, Italy

17:50 Wed 6. Jul

Study of Bridge Structural State Evolution Based on Nonlinear Vibration

Y. Jianxi

Chonqqing Jiaotong University, Chongqing, China

14:00 Tue 5. Jul

Optimal Frequency selection for vibration based damage detection using pattern recognition

D. Hesser*, B. Markert

*Institute of General Mechanics, RWTH Aachen University, Aachen, Germany

14:20 Tue 5. Jul

Characterization of the robustness of SHM imaging techniques using the absolute error of localization

J. Moriot*, N. Quaegebeur, A. Le Duff, P. Masson

*Dpt. Of Mechanical Engineering, Groupe d\'Acoustique de l\'Université de Sherbrooke, Sherbrooke, Canada

14:40 Tue 5. Jul

Sensor Placement for Modal Parameter Subset Estimation: A Frequency Response-based Approach

M. Ulriksen*, D. Bernal, L. Damkildeˆ

*Aalborg University, Esbjerg, Denmark

15:00 Tue 5. Jul

A Linearized Impact Localisation Algorithm for the Health Monitoring of Aerospace Components

M. De Simone, S. Boccardi, F. Ciampa*, M. Meo

*University of Bath, Bath, United Kingdom

10:30 Tue 5. Jul

A design strategy for highly directional piezoelectric transducers for Lamb waves inspections

L. De Marchi*, N. Testoni, A. Marzani

*University of Bologna, Bologna, Italy

10:50 Tue 5. Jul

A stamp size, 40mA, 5 grams sensor node for impact detection and location

N. Testoni*, L. De Marchi, A. Marzani

*Department of Electrical, Electronic, and Information Engineering \, University of Bologna, Bologna, Italy

11:10 Tue 5. Jul

Influence of delamination and temperature conditions on electromechanical impedance

P. Malinowski*, T. Wandowski, W. Ostachowicz

*Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdansk, Poland

11:30 Tue 5. Jul

A novel self-tuning method for Lamb wave inspection of plate-like structures

A. Dominguez-Macaya*, J. Romero, J. Vicente, J. Vicente, A. Iturrospe, J. Abete, F. Martin De La Escalera, A. Alcaide

*Mondragon University-Faculty of Engineering (MGEP), Arrasate, Spain

11:50 Tue 5. Jul

A semi-analytical approach to design of a transducer for selective wave generation

P. Packo*, M. Gawronskiˆ, M. Miszczynski, P. Zbyrad, T. Stepinski, J. Lis, T. Uhl

*Department of Robotics and Mechatronics, AGH - University of Science and Technology, Krakow, Poland

12:10 Tue 5. Jul

SHM of Thick Structures via E/M Impedance of Embedded PWAS for Weight Loss Defects

T. Kamas*, T. Kamas*, M. Tekkalmaz

*Eskisehir Osmangazi University, Eskisehir, Turkey

14:00 Tue 5. Jul

Piezo-electric Thick Films for Sensing

M. Eaton*, J. Hale, M. Pearson, D. Crivelli, A. Deligianni

*Cardiff School of Engineering, Cardiff University, Cardiff, United Kingdom

14:20 Tue 5. Jul

Optimization of Energy Harvesting concepts from vibration by piezoelectric actuator design.

N. Murillo*, J. Maudes, A. Pérez Márquez, J. Ortiz, G. Aranguren

*Trasnport & Industry Division, TECNALIA, Donostia-San Sebastian, Spain

14:40 Tue 5. Jul

About the Effects of Debonding of PWAS on the Wave Propagation and the Electro-Mechanical Impedance Spectrum

I. Mueller*, A. Shpak, M. Golub, C. Fritzenˆ

*Department of Mechanical Engineering, University of Siegen, Siegen, Germany

15:00 Tue 5. Jul

Impact Detection System for Structures during their Storage and Transport

G. Aranguren*, J. Ortizˆ, J. Etxaniz, N. Murillo, J. Maudes, A. Donado, E. Rueda, A. Pérez Márquez

*Electronic technology, University of the Basque Country (UPV/EHU), Bilbao, Spain

09:30 Wed 6. Jul

Damage Detection in Metallic Plate Structures using d36-type Piezoelectric Phased Arrays

W. Wang*, J. Lynchˆ, H. Li

*Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, School of Civil Engineering, Harbin Institute of Technology (HIT), Harbin, China

09:50 Wed 6. Jul

Combination of frequency shift and impedance-based method for robust temperature sensing using piezoceramic devices for SHM

E. Lize*, C. Hudin, N. Guenard, M. Rebillat, N. Mechbal, C. Bolzmacher

*French Atomic Energy Commission (CEA), Palaiseau, France

16:30 Tue 5. Jul

Investigating the performance of OEM devices for structural monitoring

F. Casciati*, S. Casciati, L. Faravelli, M. Vece

*University of Pavia, Pavia, Italy

16:50 Tue 5. Jul

SHM with EMATs

F. Cegla*, J. Isla-Garcia, B. Herdovics

*Mechanical Engineering, Imperial College London, London, United Kingdom

17:10 Tue 5. Jul

Response comparison of FBG sensor, strain gage, and piezo-electric accelerometer in an aluminum cantilever beam shock load

S. Fukumoto*, N. Tomio

*Technical Research & Development Center, IHI Inspection & Instrumentation Co., Ltd., Yokohama, Japan

17:30 Tue 5. Jul

Radar-based Mechanical Vibration Sensing for Structural Health Monitoring Applications: A Comparison of Radar Transceiver Measurements at 24GHz and 100GHz

J. Moll*, V. Krozer

*Goethe-University Frankfurt am Main, Frankfurt am Main, Germany

18:10 Tue 5. Jul

GNSS and multi-sensor fusion technique applied to an experimental model

R. Seabra*, S. Magalhaes, C. Felix, C. Rodrigues

*Construct-FEUP, Faculty of Engineering of University of Porto, Porto, Portugal

09:30 Wed 6. Jul

A Novel Full Scale Roller Rig Test Bench for SHM Concepts of Railway Vehicles

H. Jung*, T. Münker, G. Kampmann, K. Rave, C. Fritzen, O. Nelles

*Institute of Mechanics and Control Engineering- Mechatronics, University of Siegen, Siegen, Germany

09:50 Wed 6. Jul

Condition Monitoring of a Weak Railway Bridge by Axel Load and Structure Resistance Evaluation

M. Vospernig*, R. Wagner, G. Gasparin

*REVOTEC zt gmbh, Wien, Austria

10:10 Wed 6. Jul

MFL Sensing based NDE Technique for Defect Detection of Railroad Track

J. Kim*, J. Park, B. Yu, S. Park

*Sungkyunkwan University, SUWON, South Korea

11:00 Wed 6. Jul

Health monitoring and damage assessment using a georadar: case studies and challenges in Cuba

E. Chagoyén Méndez*, R. Ramírez Díaz, A. Claro Duménigo, M. Rodríguez Castellanos, V. Elena Parnas, G. Aragón, D. Curbelo Concepción, C. Recarey Morfa, G. Lombart, D. Roose

*Civil Engineering, Universidad Central "Marta Abreu" de Las Villas, Santa Clara, Cuba

11:20 Wed 6. Jul

Fiber Optic Sensing System for Weighing In Motion (WIM) and Wheel Flat Detection (WFD) in railways assets: the TWBCS system

A. Iele*, V. Lopez, A. Laudati, N. Mazzino, G. Bocchetti, A. Cusano, A. Cutolo

*Optoelectronic Division - Engineering Department, University of Sannio, Benevento, Italy

11:40 Wed 6. Jul

Guided wave-based inspection methodology for high speed train hollow axles

L. Cheng*, A. Ziaja

*Mechanical Engineering, Hong Kong Polytechnic University, Hong Kong, Hong Kong, China

12:00 Wed 6. Jul

Detect Rail Crack Acoustic Emission based on Frequency Gaussian

W. Liang*, Z. Chen, H. He, D. Qin

*Sichuan Southwest Jiaotong University Railway Development Company, Chengdu, China

09:30 Wed 6. Jul

Structural Health Monitoring tools for late and end of life management of Offshore Wind Turbines.

M. McGugan*, S. McKirdy

*Department of Wind Energy, Technical University of Denmark, Roskilde, Denmark

09:50 Wed 6. Jul

Damage Detection in Laboratory Scale Model of the Offshore Support Structure Using Two Different Measurement Techniques

M. Mieloszyk*, M. Luczak, E. Mucchi, J. Telega, W. Ostachowicz

*Mechanics of Intelligent Structures Department, Institute of Fluid-Flow Machinery Polish Academy of Sciences (IFFM PASci), Gdansk, Poland

10:10 Wed 6. Jul

Texture Analysis for Wind Turbine Fault Detection

L. Mujica*, M. Ruiz, L. Acho, S. Alférez, C. Tutivén, Y. Vidal, J. Rodellar

*Department of Mathematics, Escola d’Enginyeria de Barcelona Est (EEBest), Campus Diagonal-Besós, Universitat Politécnica de Catalunya (UPC), Barcelona, Spain

11:00 Wed 6. Jul

Wind turbine fault detection through principal component analysis and multivariate statistical inference

F. Pozo*, Y. Vidal, L. Acho

*Department of Mathematics, Universitat Politècnica de Catalunya, Barcelona, Spain

11:20 Wed 6. Jul

Optimization of a wind turbine vibration based SHM system

G. Oliveira, F. Magalhães*, Á. Cunha, E. Caetano

*Civil Engineering, Faculty of Engineering, University of Porto, Porto, Portugal

11:40 Wed 6. Jul

Efficient neuro-fuzzy damage severity estimation in an experimental wind turbine blade using the Fukunaga-Koontz transform of vibration signal correlations

S. Hoell*, P. Omenzetter

*LRF Centre for Safety and Reliability Engineering, University of Aberdeen, Aberdeen, United Kingdom

12:00 Wed 6. Jul

Active vibration-based SHM system: demonstration on an operating Vestas V27 wind turbine

D. Tcherniak*, L. Mølgaard

*Innovation group, Bruel & Kjaer SVM, Naerum, Denmark

12:20 Wed 6. Jul

Detection and identification of a damaged blade without stopping the wind turbine

D. Tcherniak

Innovation group, Bruel & Kjaer SVM, Naerum, Denmark

14:00 Wed 6. Jul

Continuous Monitoring of the Structural Condition of the Tower and Supporting Structure of Floating and Static Offshore Wind Turbines

Á. Angulo*, S. Soua, J. Kanfoud, T. Gan, C. Herve

*Condition and Structural Health Monitoring, TWI Ltd, Cambridge, United Kingdom

14:20 Wed 6. Jul

Monitoring of Wind Turbine structures with concrete-steel hybrid tower design

M. Botz*, S. Oberländer, M. Raith, C. Grosse

*Chair of Non-destructive Testing, Technical University of Munich (TUM), Munich, Germany

14:40 Wed 6. Jul

Optimization of the Return-On-Investment (ROI) based on RAM-LCC analysis. A wind energy sector case study.

A. Erguido*, E. Castellano, J. Gómez, A. Márquez

*Advanced Manufacturing Technologies, IK4 Ikerlan, Mondragon, Spain

15:00 Wed 6. Jul

Remaining useful life assessment of offshore wind turbines: Validation of virtual sensing on long term measurements

A. Iliopoulos*, W. Weijtjens, D. Van Hemelrijck, C. Devriendt

*Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Brussels, Belgium

15:20 Wed 6. Jul

Fleet-wise structural health monitoring of (offshore) wind turbine foundations

W. Weijtjens*, N. Noppe, T. Verbelen, C. Devriendt

*AVRG, Vrije Universiteit Brussel, Brussels, Belgium

15:40 Wed 6. Jul

Damage Localization at Wind Turbine Support Structures Using Sequential Quadratic Programming for Model Updating

K. Schröder*, R. Rolfes, C. Gebhardt

*Institute of Structural Analysis, University of Hanover, Hanover, Germany

16:30 Wed 6. Jul

Corrosion and fatigue health monitoring systems appraisal for offshore steel structures

M. Denecker*, L. Gaillet, S. Chataigner, J. David, R. Michel, Y. Falaise

*the French institute of science and technology for transport, development and networks (IFSTTAR), Bouguenais Cedex, France

16:50 Wed 6. Jul

Influence of Environmental Conditions and Damage on the Modal Properties of a Small Scale Wind Turbine – A Case Study

C. Fritzen, C. Schmidt, D. Ginsbergˆ, I. Mueller*, T. Carolus, K. Volkmer

*Department of Mechanical Engineering, University of Siegen, Siegen, Germany

17:10 Wed 6. Jul

Potentials and Strategies for applying Structural Health Monitoring within the Wind turbine industry

L. Damkilde*, M. Ulriksen, D. Tcherniak, R. Johansen

*Department of Civil Engineering, Aalborg University, Esbjerg, Denmark

17:30 Wed 6. Jul

Experimental validation of stochastic subspace algorithms for structural health monitoring of offshore wind turbine towers and foundations

P. Kraemer*, C. Ebert, H. Friedmann, J. Mahowald, B. Wölfel

*Wölfel Engineering GmbH + Co. KG, Höchberg, Germany

17:50 Wed 6. Jul

Condition monitoring, structural health monitoring, population monitoring – Approach to a definition of the different concepts by means of practical examples from the field of wind energy

H. Friedmann*, P. Kraemer

*Wölfel Engineering GmbH+Co. KG, Höchberg, Germany

18:10 Wed 6. Jul

Combining a vibration-based SHM-scheme and an airborne sound approach for damage detection on wind turbine rotor blades

S. Tsiapoki*, T. Krause, M. Häckell, R. Rolfes, J. Ostermann

*Faculty of Civil Engineering and Geodetic Science, Institute of Structural Analysis (ISD), Leibniz Universität Hannover, Hanover, Germany

18:30 Wed 6. Jul

High-dimensional data analysis for early fault detection in wind turbines

E. S. Nadimi*, J. Herp, V. Blanes-Vidal

*Maersk Mc-Kinney Moller Inst. (Electrical Engineering), University of Southern Denmark (SDU), Odense, Denmark

16:30 Wed 6. Jul

Rapidly Assembled Graphene-based Coatings for Structural Sensing

L. Wang, K. Loh*, W. Chiang

*Department of Structural Engineering, University of California, San Diego, La Jolla, USA

16:50 Wed 6. Jul

A piezoresistive sensor based on carbon nanotube yarns

S. Frutos, J. Fernández*, B. Más, Á. Ridruejo, J. Vilatela

*IMDEA Materials Institute, Getafe, Spain

17:10 Wed 6. Jul

An analytical model to correlate the damage state and the electrical resistance change in symmetric laminates

M. Zappalorto*, F. Panozzo, P. Carraro, M. Quaresimin

*Department of Engineering and Management of Industrial Systems, University of Padova, Vicenza, Italy

17:30 Wed 6. Jul

Poly(Acrylic Acid) Coated Gold Nanoparticles for pH Sensing Applications

C. Brubaker*, T. Frecker, I. Njoroge, K. Jennings, D. Adams

*Civil Engineering, Vanderbilt University, Nashville, USA

17:50 Wed 6. Jul

Shear Stress Monitoring of a Single-Lap Joint Using Inkjet-Printed Carbon Nanotube Strain Distribution Sensor

Y. Zhao*, M. Schagerl

*Institute of Constructive Lightweight Design, Johannes Kepler University Linz (JKU), Linz, Austria

18:10 Wed 6. Jul

An analytical and experimental study on the piezoresistive behaviour of polymers doped with carbon nanotubes

F. Panozzo*, M. Zappalorto, M. Quaresimin

*Department of Engineering and Management of Industrial Systems, University of Padova, Vicenza, Italy

18:30 Wed 6. Jul

Structural Health Monitoring of Bonded Joints Using CNT Doped Adhesives

X. Fernández Sánchez-Romate*, M. Sánchez, C. García-Nieto, J. Molinero, A. Jimenez-Suarez, A. Güemes, A. Ureña

*Department of Applied Mathematics, Materials Science Engineering and Electronic Technology, University of Rey Juan Carlos (URJC), Madrid, Spain

09:00 Thu 7. Jul

Data Fusion of Accelerometers with Inclinometers for Reference-free High Fidelity Displacement Estimation

A. Ozdagli*, F. Moreuˆ, J. Gomez, S. Vemuganti, P. Garg

*Department of Civil Engineering, University of New Mexico, Albuquerque, USA

09:30 Thu 7. Jul

Damage diagnosis of cable-stayed bridges based on the variation of stay cable forces

C. Chen*, W. Wu, C. Liu

*Department of Construction Engineering, National Yunlin University of Science & Technology, Yunlin, Taiwan, Republic of China

09:50 Thu 7. Jul

General Selection Criterion for Time Lag Parameter in Applications of Stochastic Subspace Identification for Civil Structures

W. Wu*, S. Wang, C. Chen, G. Lai

*Department of Construction Engineering, National Yunlin University of Science and Technology, Touliu, Yunlin, Taiwan, Republic of China

10:10 Thu 7. Jul

Integrated Modeling and Monitoring of the Medieval Bridge Azzone Visconti

L. Barazzetti*, F. Banfi, R. Brumana, M. Previtali, F. Roncoroni

*Politecnico di Milano, Lecco, Italy

11:00 Thu 7. Jul

20 Years of SHM

D. Inaudi

SMARTEC SA, Manno, Switzerland

11:40 Thu 7. Jul

The potential of the TLS and GPR methods for the SHM of masonry arch bridges

M. Solla*, B. Riveiro, B. Conde-Carnero, P. Arias, H. Lorenzo

*Defense University Center, Marin, Spain

12:00 Thu 7. Jul

Sensory system development for bridge scour early warning

Y. Lin*, J. Lai, K. Chang

*National Center for Research on Earthquake Engineering, Taipei, Taiwan, Republic of China

12:20 Thu 7. Jul

Resilience monitoring of bridge networks

M. Ettouney*, S. Alampalli

*Mohammed Ettouney, LLC, West New york, USA

12:40 Thu 7. Jul

Disaster Monitoring, Early-warning and Emergency Management of Long-span Bridges

X. Yan*, X. Wang, S. Cai, X. Li, K. Luo

*Bridge Technology Research Center, Research Institute of Highway Ministry Transport (RIOH), Beijing, China

14:00 Thu 7. Jul

Modal Identification of Bridges based on Continuous Dynamic Monitoring

M. Xuˆ, L. Santos*, T. Vieira

*Department of Structures, National Laboratory for Civil Engineering, Lisboa, Portugal

14:20 Thu 7. Jul

Structural Monitoring and Analysis of Bridges for Emergency Response

Y. Kaya*, C. Ventura

*The University of British Columbia, Vancouver, Canada

14:40 Thu 7. Jul

Development of site-specific live load models for bridge condition assessment based on long-term SHM data

Y. Xia*, Y. Niˆ

*Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hong Kong, Hong Kong, China

15:00 Thu 7. Jul

Evaluation of data-driven methods for damage detection under environmental effects – application to a cable stayed bridge

E. Toméˆ, M. Pimentel*, J. Figueiras

*University of Porto, Faculty of Engineering, Porto, Portugal

15:20 Thu 7. Jul

Effects of Energy Harvesting Potential for Bridge Monitoring over its Life-Cycle

P. Cahill, C. Hanley, A. Mathewson, V. Jaksic, V. Pakrashi*

*University College Cork, Ireland, Cork, Ireland

15:40 Thu 7. Jul

Economical assessment of the SHM system of the Rio Papaloapan bridge

J. Quintana Rodriguez*, F. Carrion Viramontes, S. Crespo Sanchez, J. Hernandez Figueroa, H. Gasca Zamora

*Instituto Mexicano del transporte "Mexican Institute of transport", Queretaro, Mexico

11:00 Wed 6. Jul

Design strategy of structural health monitoring system consisting of four sensors for tall buildings

A. Mita*, K. Hirai, S. Ozawa

*Department of System Design Engineering, Keio University, Yokohama, Japan

11:20 Wed 6. Jul

Structural health monitoring of cultural heritage structures: Applications on Peristyle of Diocletian`s Palace in Split

I. Duvnjak*, D. Damjanović, J. Krolo

*University of Zagreb Faculty of Civil Engineering (UNIZGCE), Zagreb, Croatia

11:40 Wed 6. Jul

Structural Health Monitoring and Vulnerability Assessment of Buildings in Earthquake Prone Areas

S. Tyagunov*, Y. Petryna

*Chair of Structural Mechanics, Technische Universität Berlin, Berlin, Germany

12:00 Wed 6. Jul

Tracking modal parameters from building seismic response measurements

C. Loh*, N. Yeh, J. Chen, T. Wu

*Civil Engineering Department, National Taiwan University, Taipei, Taiwan, Republic of China

12:20 Wed 6. Jul

Observations on the Structural Response of two Historical Structures from Earthquake and Explosion Recordings

E. Cakti*, E. Şafak, E. Dar, N. Yenihayat

*Department of Earthquake Engineering, Bogazici University, KOERI, Istanbul, Turkey

16:30 Tue 5. Jul

A FIBEROPTIC SENSING SYSTEM FOR SYSTEM HEALTH MONITORING IN OIL&GAS INDUSTRY APPLICATIONS

J. Singer*, D. Karabacakˆ, M. Farnan, S. Ibrahim, M. Todd

*Fugro Technology BV, Leidschendam, Netherlands

16:50 Tue 5. Jul

Multidimensional big data processing for damage detection in real pipelines using a smart pig tool

M. Ruiz*, L. Mujica, M. Quintero, R. Villamizar, S. Alférez

*Department of Mathematics, Escola d’Enginyeria de Barcelona Est (EEBest),Campus Diagonal-Besós, Universitat Politécnica de Catalunya (UPC), Barcelona, Spain

17:10 Tue 5. Jul

study on in-situ capacitive sensor for monitoring engine lubricant oil debris

Y. Wang*, Z. Han, D. Liang, X. Qingˆ

*School of Aerospace Engineering, Xiamen University (XMU), Xiamen, China

17:30 Tue 5. Jul

Distributed Fiber Optic Fuel Leak Detection System

E. Mendoza

Redondo Optics Inc, Redondo Beach, USA

17:50 Tue 5. Jul

Towards a condition monitoring scheme for combustion instability detection and fuel blends performance classification in gas turbine engines using pattern recognition and advanced machine learning

I. Matthaiou*, B. Khandelwal, I. Antoniadou

*Dynamics Research Group, Department of Mechanical Engineering, University of Sheffield, Sheffield, United Kingdom

18:10 Tue 5. Jul

Experimental study of ultrasound characteristics in steel samples cut out of a pipeline that has been exploited during a long time

A. Malkhanov*, V. Erofeev

*Mechanics Engineering Research Institute, Russian Academy of Sciences, Nizhny Novgorod, Russia

10:30 Fri 8. Jul

DiView – Data management software for distributed strain and temperature sensing

D. Inaudi

SMARTEC SA, Manno, Switzerland

10:40 Fri 8. Jul

Structural fault detection on composite blades - SHM prototype in action on Vestas turbine

D. Tcherniak*, J. Hansen

*Innovation group, Bruel & Kjaer SVM, Naerum, Denmark

10:50 Fri 8. Jul

Embedded Piezodiagnostics for Online Structural Damage Detection Based on PCA Algorithm

R. Villamizar Mejia*, L. Mujica Delgado, M. Ruiz Ordoñez, J. Camacho Navarro, F. Ariza

*ELECTRICAL, ELECTRONICS AND TELECOMUNNICATIONS SCHOOL, UNIVERSIDAD INDUSTRIAL DE SANTANDER, BUCRAMANGA, Colombia

11:00 Fri 8. Jul

Quasi-distributed acoustic emission monitoring system

J. Grelin

Smart Fibres Ltd, Bracknell, United Kingdom

11:20 Fri 8. Jul

Temperature Compensation of Guided Wave for Structural Health Monitoring

S. Yuan*, L. Qiu, J. Zhang

*Research Center of Structural Health Monitoring and Prognosis, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics (NUAA), Nanjing, China

09:30 Wed 6. Jul

Human Effectiveness Directorate Overview

D. Stargel

711th Human Performance Wing, WPAFB, USA

09:50 Wed 6. Jul

Assessing Interface Layer Characteristics of Functionally Graded Material And Biological Tissue Through Acoustic Mapping

R. Ahmad*, S. James

*Civil Engineering & Construction Management, California State University, Northridge, Northridge, USA

10:10 Wed 6. Jul

Fully integrated flexible thin film sensing system utilizing polymer nanocomposite strain sensors

A. Burton, J. Lynch*

*Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, USA

11:00 Wed 6. Jul

Towards the Development of “Smart” Percutaneous, Osseointegrated Implants

M. Todd*, J. Reed, D. Barnett

*Structural Engineering, University of California San Diego, La Jolla, USA

11:20 Wed 6. Jul

Healing Assessment of an Externally Fixated Fractured Femu

W. Ong, L. Salvino, M. Russ, W. Chiu*, Z. Chiuˆ

*Department of Mechanical & Aerospace Engineering, Monash University, Clayton, Australia

11:40 Wed 6. Jul

Innovations in Flexible Hybrid Electronics for Human Performance and Medicine

R. Naik

711th Human Performance Wing, WPAFB, USA

12:00 Wed 6. Jul

Wearable Performance Monitoring - Sensors for Airman Performance

D. Stargel*, C. Murdock

*711th Human Performance Wing, WPAFB, USA

12:20 Wed 6. Jul

Sensors based on semi-conductive strain gauges for automated structural health monitoring and medical applications

R. Mueller*, H. Chelner

*Micron Instruments, Inc., Simi Valley, USA

09:00 Thu 7. Jul

Integration of Non-Destructive Evaluation based Ultrasonic Simulation (INDEUS) – A Means for Simulation in SHM

C. Boller*, D. Mahapatra, R. Sridaran Venkat, N. Balajee Ravi, N. Chakraborty, P. Starke, M. Steckel, D. Krishnamurthy

*Materials Science, LZfPQ, Universität des Saarlandes, Saarbrücken, Germany

09:30 Thu 7. Jul

Combined Empirical and Analytical Virtual Sensing for Full-Field Dynamic Response Estimation

J. Kullaa

Helsinki Metropolia University of Applied Sciences, Metropolia, Finland

09:50 Thu 7. Jul

Simulation of SHM System Solutions Based on Commercial Software Packages

R. Sridaran Venkat*, C. Boller, D. Roy Mahapatra, N. Ravi, N. Chakraborty

*LZfPQ (Chair of Nondestructive Testing), Saarland University, Saarbruecken, Germany

10:10 Thu 7. Jul

Methods and tools for model-based virtual sensors applied to condition monitoring

M. Gonzalez*, E. Esteban, O. Salgado, J. Croes, B. Pluymers, W. Desmet

*IK4-Ikerlan, Arrasate-Mondragon, Spain

11:00 Thu 7. Jul

Simulation based Optimization of Sensor Network for SHM of Complex Structures

D. Roy Mahapatra*, N. Ravi, N. Chakraborty

*Aerospace Engineering, Indian Institute of Science, Bengaluru, India

11:20 Thu 7. Jul

A Study on Effectiveness of an SHM Sensor System for Fatigue Damage Inspection

N. Ravi*, N. Chakraborty, M. Steckel, P. Betagiri, P. Raghuraman, R. Shivamurthy, R. Sridaran Venkat, D. Roy Mahapatra, C. Boller

*Department of Aerospace Engineering, Indian Institute of Science (IISc), Bengaluru, India

11:40 Thu 7. Jul

Ultrasonic Guided Wave Simulation Performance Evaluation for QNDE-SHM Processes

N. Ravi*, N. Chakraborty, D. Roy Mahapatra, R. Sridaran Venkat, C. Boller

*Department of Aerospace Engineering, Indian Institute of Science (IISc), Bengaluru, India

12:00 Thu 7. Jul

Monitoring and Health prognosis of Lithium-Ion battery system

P. Górny*, P. Mróz, T. Uhl

*Department of Robotics and Mechatronics, AGH University of Science and Technology, Cracow, Poland

12:20 Thu 7. Jul

Sensor placement technique using BaTiO3/epoxy resin piezoelectric composite sensors based on differential imaging method for damage detection in structural health monitoring

R. Sridaran Venkat*, O. Bareiro, C. Boller, J. Adam, A. Taltavull Cazcarra

*LZfPQ (Chair of Nondestructive Testing), Saarland University, Saarbruecken, Germany

09:00 Thu 7. Jul

Combining active thermograhics and topological derivative

J. Vega*, J. Perales, M. Rapun, M. Higuera

*E.T. S.I. Aeronáutica y del Espacio, Universidad Politécnica de Madrid, Madrid, Spain

09:30 Thu 7. Jul

On the use of unsupervised response–only vibration–based damage detection methods for a population of composite structures

K. Vamvoudakis-Stefanouˆ, J. Sakellariou, S. Fassois*

*University of Patras, Patras, Greece

09:50 Thu 7. Jul

Damage identification in longitudinally vibrating rods based on quasi-isospectral operators

E. Turco*, A. Bilotta, A. Morassi

*DADU, Università di Sassari, Alghero, Italy

10:10 Thu 7. Jul

Predicting Thermal Response for Structural Health Monitoring using Blind Source Separation Method

Y. Zhu*, A. Jesus, I. Laory

*School of Engineering, The University of Warwick, Coventry, United Kingdom

11:00 Thu 7. Jul

Data Visualization Approach for Operational Loading Variations of an Aircraft Wing Box using Vibration based Damage Detection

S. Abdul rahim*, G. Manson, K. Worden

*Mechanical Engineering, University of Sheffield (UOS), Sheffield, United Kingdom

11:20 Thu 7. Jul

Crack identification in non-uniform bending vibrating beams by minimal frequency data

A. Morassi*, J. Fernandez-Saez

*Polytechnic Department of Engineering and Architecture, University of Udine, Udine, Italy

11:40 Thu 7. Jul

Structural Damage detection and classification based on Machine learning algorithms

D. Tibaduiza Burgos*, J. Vitola, M. Anaya, F. Pozo

*Faculty of Electronics Engineering, Universidad Santo Tomas, Bogota, Colombia

12:00 Thu 7. Jul

Environmental effect compensation for damage detection in structures using Artificial Neural Networks and Chirplet Transform

J. García-Alonso*, A. Fernández-Lópezˆ, I. González-Requena, A. Güemes

*Departamento de materiales y producción aeroespacial, Universidad Politécnica de Madrid, Madrid, Spain

12:20 Thu 7. Jul

Damage feature extraction from measured Lamb wave signals using a model-based approach

C. Dürager*, C. Boller, A. Cornish

*SR Techncis, Zurich, Switzerland

09:00 Thu 7. Jul

An optimization strategy for best sensor placement for damage detection and localization in complex composite structures

Z. Sharif Khodaei*, F. Aliabadi

*Aeronautics, Imperial College London, London, United Kingdom

09:30 Thu 7. Jul

Validation testing of an integrated process and structural health monitoring system based on piezoelectric sensors on a PAX door edgemember made by RTM

M. Scheerer*, Z. Simon, M. Marischler, T. Roser, B. Rittenschober

*Polymer Composites Group, Aerospace & Advanced Composites GmbH, Wiener Neustadt, Austria

09:50 Thu 7. Jul

Energy harvesting for a self-powered compact Structural Health Monitoring system based on Acoustic Emission

D. Crivelli*, C. Featherston, R. Pullin

*School of Engineering, Cardiff University, Cardiff, United Kingdom

10:10 Thu 7. Jul

Acoustic emission for assessment of impact and lightning damage to woven carbon fibre laminates

D. Crivelli*, T. Vinestock, M. Eaton, D. Mitchard, R. Pullin

*School of Engineering, Cardiff University, Cardiff, United Kingdom

11:00 Thu 7. Jul

A novel approach of impact load identification for composite structures

G. Yan*, H. Sun, O. Büyüköztürk

*College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China

11:20 Thu 7. Jul

An experimental investigation on the adhesion of printed electronics on fiber reinforced composites

F. Heinrich*, R. Lammering

*Institute of Mechanics, Helmut-Schmidt-University/University of the Federal Armed Forces Hamburg (HSU), Hamburg, Germany

11:40 Thu 7. Jul

Laser shock a novel way to generate calibrated delamination in composites: concept and first results

M. Ghrib*, L. Berthe, M. Rebillat, N. Mechbal, M. Guskov, M. Boustie, R. Ecault

*Processes and Engineering in Mechanics and Materials laboratory (PIMM), Arts et Métiers ParisTech, Paris, France

12:00 Thu 7. Jul

Assessment of impact and post-impact behaviour for certain types of sandwich composites

N. Constantin*, M. Sandu, A. Sandu, M. Gavan, C. Epuran, B. Patrau

*Strength of Materials, Laboratory for Integrity Evaluation of Composite Structures, The University "Politehnica" of Bucharest, Bucharest, Romania

12:20 Thu 7. Jul

Damage imaging using Acousto-Ultrasonic tomography in plate-like structures with portable sparse arrays in direct non-glued contact.

C. Mattei*, R. Risberg

*Creo Dynamics AB, Linköping, Sweden

14:00 Thu 7. Jul

On-line monitoring of a laser assisted fiber placement process with CFR thermoplastic matrix by using Fiber Bragg Gratings

D. Saenz del Castillo*, I. Martín, F. Rodriguez-Lence, A. Güemes

*Thermoplastics, Foundation for the research, development and application of composite materials (FIDAMC), GETAFE, Spain

14:20 Thu 7. Jul

Glass fibre composite elements with embedded fibre Bragg grating sensors inspected by thermography techniques

K. Majewska*, M. Mieloszyk, W. Ostachowicz

*Mechanics of Intelligent Structures Department, Institute of Fluid-Flow Machinery Polish Academy of Sciences (IFFM PASci), Gdansk, Poland

14:40 Thu 7. Jul

Glass fibre composite elements with embedded fibre Bragg grating sensors inspected by THz spectroscopy

M. Mieloszyk*, K. Majewska, W. Ostachowicz

*Mechanics of Intelligent Structures Department, Institute of Fluid-Flow Machinery Polish Academy of Sciences (IFFM PASci), Gdansk, Poland

15:00 Thu 7. Jul

Process Induced strains monitoring during multiple step fabrication of thick composite cylinders

A. Martone*, M. Esposito, V. Antonucci, M. Zarrelli, M. Giordano

*Institute for Composite and Biomedical Materials - National Research Council of Italy, CNR-IPCB, PORTICI, Italy

15:20 Thu 7. Jul

Error Outlier Detection Based Impact Monitoring Application on Light Aircraft’s Composite Wing

P. Shrestha*, Y. Park, C. Kim

*Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, South Korea

14:00 Thu 7. Jul

Lamb-Waves for Air-coupled Ultrasonic Testing with one-sided Access

W. Hillger*, D. Ilse, L. Bühling

*Ingenieurbüro Dr. Hillger, Braunschweig, Germany

14:20 Thu 7. Jul

Accelerated Laser Ultrasonic Scanning using Binary Search

B. Park*, H. Sohn, P. Liu

*Departments of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, South Korea

14:40 Thu 7. Jul

Ultrasonic Imaging Using Global Matched Coefficients

S. Sternini*, T. Nguyen, F. Lanza di Scalea

*Structural Engineering, University of California, San Diego (UCSD), La Jolla, USA

15:00 Thu 7. Jul

Structural Health Monitoring Ultrasonic System

G. Aranguren*, J. Etxanizˆ, E. Barrera, M. Ruiz, M. Olivares, I. Taboada, A. Urrutia, R. Melendez

*Electronic technology, University of the Basque Country (UPV/EHU), Bilbao, Spain

15:20 Thu 7. Jul

damage detection on thin walled structures with single frequency excitation and wavenumber filtering

S. Kang*, E. Flynn, J. Jeon, G. Park

*Mechanical engineering, Chonnam National University, Gwangju, South Korea

15:40 Thu 7. Jul

Assessment of the impact of air voids on adhesive joints in rotor blades by use of NDT and FEA

D. Kovačević*, Y. Petryna, M. Petronijević

*Engineering Mechanics and Theory of Structures, Faculty of Civil Engineering University of Belgrade, Belgrade, Serbia

14:00 Tue 5. Jul

Uncertainties when using EVA (extreme value analysis) in SHM

F. Cegla*, D. Benstock

*Mechanical Engineering, Imperial College London, London, United Kingdom

14:20 Tue 5. Jul

Evaluation of the probability of failure using Bayesian theorem for real-time condition monitoring

A. Iwasaki*, Y. Sanyoshi

*Gunma University, Gunma, Japan

14:40 Tue 5. Jul

Comprehensive Bayesian structural identification applied to a scale aluminium bridge

A. Jesus*, Y. Zhu, I. Laory

*School of Engineering, University of Warwick, Coventry, United Kingdom

15:00 Tue 5. Jul

Statistical Damage Localization with Stochastic Load Vectors Using Multiple Mode Sets

M. Bhuyan*, M. Döhler, L. Mevel

*I4S Team, Institut national de recherche en informatique et en automatique (INRIA), Rennes, France

15:20 Tue 5. Jul

Statistical Impact-echo Analysis using Bag-of-echoes Model for Concrete Condition Assessment

J. Ye*, T. Kobayashi, M. Iwata, M. Murakawa

*Artificial Intelligence Applications Research Team, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan

15:40 Tue 5. Jul

Damage Detection of Structures with Detrended Fluctuation and Detrended Cross-Correlation Analyses

H. Fajri, M. Wang, T. Lin*

*Civil Engineering, National Chiao Tung University, Hsin-Chu, Taiwan, Republic of China

16:30 Tue 5. Jul

GPGPU implementation of modal parameter tracking by particle based Kalman filter

A. Crinière*, L. Mevel, J. Dumoulin, M. Zghal

*I4S Team, Inria, Rennes, France

16:50 Tue 5. Jul

Applying Extreme Value Theory for alarm and warning levels setting under variable operating conditions

D. Filcheva*, N. Lieven, P. Morrish, P. Hutchinson

*University of Bristol, Bristol, United Kingdom

17:10 Tue 5. Jul

A structural damage detection technique based on agglomerative clustering applied to the Z-24 Bridge

M. Silva*, A. Santos, R. Santos, E. Figueiredoˆ, C. Sales, J. Costa

*Applied Electromagnetism Laboratory, Federal University of Pará, Belém, Brazil

17:30 Tue 5. Jul

Solving Bayesian multi-parameter estimation problems using the mechanical equivalent of logical inference

D. Bolognani*, C. Cappello, D. Zontaˆ

*Deptartment of Civil, Environmental and Mechanical Engineering, University of Trento, Trento, Italy

*Contact, ˆSpeaker if not Contact