Conference & Proceedings

8th European Workshop On Structural Health Monitoring (EWSHM 2016)

5-8 July 2016, Spain, Bilbao
Right Now in Bilbao 22:46 Fri 3

36 Posters of 2 Subjects
  • POSTERS-1Tuesday 5. Jul 16:00 - 16:30 - A1
  • POSTERS-2Wednesday 6. Jul 16:00 - 16:30 - A1

PWAS inspection in materials with different properties

A. Dominguez-Macaya*, A. Iturrospe, J. Abete, G. Aranguren

*Mondragon University-Faculty of Engineering (MGEP), Arrasate, Spain

Detection of fatigue crack under temperature changes using stress waves and statistical analysis

J. Tang*, G. Yan, C. Cai

*College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China

Comparison study on migration methods of GPR scanning images for concrete inspection

H. Zheng*, T. Gan, C. Selcuk, E. Cheilakou

*Brunel Innovation Centre, Brunel University, Cambridge, United Kingdom

Some problems of diagnosis of helicopter Mi-24 from the perspective of HUMS system

A. Gebura*, M. Żokowski

*Avionics Division, Air Force Institute of Technology (AFIT), Warsaw, Poland

Monitoring of a Warren Truss Hangar

L. Locklin, J. Orellana, G. Akhras*

*Centre for Smart Materials and Structures, Royal Military College of Canada, Kingston, Canada

A study of on-line monitoring and evaluation approach for oil and gas pipelines subsidence deformation

K. Ding*, F. Tang, L. Chen, Y. He, G. Chen, L. Yi

*China Special Equipment Inspection and Research Institute (CSEI), Beijing, China

Monitoring of fatigue crack propagation by intensity-based plastic optical fiber sensor

D. Yang*, W. Ren, D. Li

*School of Civil Engineering, Hefei University of Technology, Hefei, China

New generation of flexible risers equipped with motion capture - Morphopipe system

N. Saguin-Sprynski*, M. Carmona, L. Jouanet, O. Delcroix

*System Department, CEA, LETI, Grenoble, France

Modal Testing and System identification of a three story steel frame

A. Sabamehr*, A. Bagchi, L. Trica

*Building, Civil and Environmental Engineering, Concordia University, Montreal, Canada

vibration-based anomaly detection using flac features for wind turbine condition monitoring

J. Ogata*, M. Murakawa

*National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan

A Feasibility Analysis For The Development of Novel Aircraft Weight and Balance Monitoring System based on Fiber Bragg Grating Sensors

M. Leone*, A. Iele, G. Persiano, A. Cutolo, M. Consales, A. Cusano

*Optoelectronic Division - Engineering Department, University of Sannio, Benevento, Italy

Damage Detection In Composite Landing Gear Component Using Frequency Response Method

M. Giordano*, M. Giordano*, A. Martone, G. Breglio, A. Irace, F. Fienga, F. Mennella, A. Laudati, L. Petrazzuoli

*Institute for Polymers, Composites and Biomaterials (IPCB), National Research Council CNR, Portici, Italy

Composite vessels health monitoring: from academic studies to industrial prototyping

S. Yaacoubiˆ, F. Dahmene, M. El Mountassir*

*CND, Institut de Soudure, Thionville, France

Guided Waves for the monitoring of pipelines zones under Composite Repairs: from comprehensive to pre-deployment investigations

S. Yaacoubiˆ, M. El Mountassir*, F. Dahmene

*CND, Institut de Soudure, Thionville, France

Implementation of Signal Processing Methods in a Structural Health Monitoring (SHM) System based on Ultrasonic Guided Waves for Defect Detection in Different Materials and Structures

N. Galarza*, B. Rubio, A. Díez, F. Boto, D. Gil, J. Rubio, E. Moreno

*Tecnalia Research & Innovation, Miñano, Spain

Application of Kernel Change Detection Method in Eddy Current Non-destructive Testing (EC-NDT)

M. Kermadi*, S. Moussaoui, A. Taieb brahimi, M. Feliachi

*electrical engineering, University of Science and Technology of Oran (USTO_MB), Oran, Algeria

Comparison of the performance of two different approaches for damage detection on framed structures

C. Iacovino, R. Ditommaso, M. Limongelli*, F. Ponzo

*Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano, Milano, Italy

RFID sensor systems embedded in concrete – systematical investigation of the transmission characteristics

M. Bartholmai*, C. Strangfeld, S. Mihajlov, M. Müller, M. Kammermeier

*Federal Institute for Materials Research and Testing (BAM), Berlin, Germany

Bolt Looseness Detection under Changing Temperature Conditions using Independent Component Analysis.

X. Xie*, S. Zhang, L. Xiao, W. Qu

*Engineering Mechanics, Wuhan University, Wuhan, China

Vibroacoustic method in the context of technical assesment of transmission gearbox military helicopter

M. Żokowski*, J. Spychała, P. Majewski

*AeroEngines Division, Air Force Institute of Technology (AFIT), Warsaw, Poland

Fiber Bragg Grating sensors for the measurement of tendon strain

A. Güemes*, P. Bernal

*Polytechnical University of Madrid (UPM), Madrid, Spain

Combining multi-frequency ultrasonic guided waves and topological derivative

A. Martínez Domínguez

Center of Composites Materials and Smart Structures, Applied Mathematics., Technical University of Madrid, Madrid, Spain

Damage classification in moving parts of small-scale wind turbines

D. Tibaduiza Burgos*, E. Forero, M. Anaya, J. Vitola, F. Pozo, C. Torres Pinzón

*Faculty of Electronics Engineering, Universidad Santo Tomas, Bogota, Colombia

Statistical Control methods applied to Structural Health Monitoring (SHM). The experience of Infiernillo 0 Bridge

D. García*, O. Ramos Gutierrez, M. Pantaleon


Towards Space applications of SHM technology relied on EMIS method

D. Enciu*, I. Ursu

*National Institute for Aerospace Research "Elie Carafoli" - INCAS, Bucharest, Romania

Influence of Process Parameters on Gauge Factor of CNT-Epoxy Based Strain Sensors

X. Fernández Sánchez-Romate*, M. Sánchez, J. Artigas, A. Jimenez-Suarez, A. Güemes, A. Ureña

*Department of Applied Mathematics, Materials Science Engineering and Electronic Technology, University of Rey Juan Carlos (URJC), Madrid, Spain

An update of the probabilistic reliability assessment of welding component based in inspections

A. Coro*, J. Aguirrebeitia, L. López De Lacalle

*Mechanical technology department, ITP, ITP Industria de Turbo Propulsores S.A, Zamudio, Spain

Structural health monitoring of a wing panel splice joint using acoustic emission

R. Růžek*, L. Michalcová

*VZLÚ (Aerospace Research and Test Establishment), Praha, Czech Republic

Artificial Immune System (AIS) for Damage Detection Under Variable Temperature Conditions

M. Anaya Vejar*, D. Tibaduiza Burgos, F. Pozo

*Universidad Santo tomas, Bogota, Colombia

Green roof – strategy for building restoration

Z. Poorova*, M. AlHosni, Z. Vranayová

*Technical University of Kosice, Faculty of Civil Engineering, Kosice, Slovakia

Embedded piezodiagnostics for online structural damage detection based on PCA algorithm

J. Camacho*, M. Ruiz, R. Villamizar, L. Mujica, F. Ariza

*Department of Applied Mathematics III, Escola Universitària d’Enginyeria Tècnica Industrial de Barcelona (EUETIB), Universitat Politécnica de Catalunya (UPC), Universidad Industrial de Santander (UIS), Barcelona, Spain

Sensor fault detection in a damage detection approach based on piezodiagnostics

J. Camacho*, M. Ruiz, R. Villamizar, L. Mujica

*Department of Applied Mathematics III, Escola Universitària d’Enginyeria Tècnica Industrial de Barcelona (EUETIB), Universitat Politécnica de Catalunya (UPC), Universidad Industrial de Santander (UIS), Barcelona, Spain

Technique for embedding fiber optics in metallic structures for smart material applications

T. Grandalˆ, S. Fraga, A. Zornoza Indart*

*robotics and control, AIMEN technology center, Porriño, Spain

Assessment of honeycomb core condition in composite sandwich panels by means of guided

M. Radzieński*, P. Kudela, W. Ostachowicz


Structural Health Monitoring of Wind Turbine Blades using Radar Technology: First Experiments from a Laboratory Study

M. Scholz*, S. Rediske, A. Nuber, H. Friedmann, J. Moll, P. Arnold, V. Krozer, P. Kraemer, R. Salman, D. Pozdniakov

*Wölfel Engineering GmbH + Co. KG, Höchberg, Germany

Monitoring of the Curing Process in Laminates of Composite Materials

R. Fernández*, M. Solis

*Materials and Processes, CATEC- Center for Advanced Aerospace Materials, La Rinconada, Spain

*Contact, ˆSpeaker if not Contact