 | OEM-PA Max Top of the line performance FMC, PWI, Phased Array
Ultra-High speed (1GB/s)
AWG (Arbitrary Waveform Generator) option
Can be daisy-chained for multi-electronic or multi-probe applications
64/64, 64/128, 64/256
Small form factor
OEM-PA Max is the new leading edge of what can be found in the FMC/TFM
family of beamformers. It’s outstanding speed of 1GB/s (using 10Gb
Ethernet) for a batch of 64ch allows any acquisition to be as quick in
FMC as in Phased Array.
The AWG (Arbitrary Waveform Generator) option, which allows the
emission of tone bursts, Chirps Gaussian waveforms as well as any user
defined waveform, permits to use encoded pulser shapes to improve
super-resolution and SNR.
Since OEM-PA Max also manages all Phased Array processing, it provides
all the versatility you can expect or need, and in a very small form
factor that makes any application possible. NDT Wide |  | OEM-MC2 Perfect for Thru-Transmission, research and other demanding ultrasound
applications. Low Frequency option also opens door for applications
like concrete inspection, guided wave and other structural health
monitoring research.
OEM-MC2 connects to a PC via Gigabit Ethernet, and is powered with
12V.
Its unique technology allows to acquire the A-scan with 27-bits of
resolution, so analog gain is not required anymore (all the
signal/dynamic from up to ±10V down to inside the noise floor is
acquired and available for analysis in linear or logarithmic scale in
the Software).
Each channel has a 400V pulser and a ±100V AWG (Arbitrary Waveform
Generator) that permits to generate tone bursts, Chirps and Gaussian
signals as well as any user defined waveform. Full parallel 8 channels
allow to fit in any demanding application such as thick forged part as
well as through transmission systems for bonding, composite and
honeycomb inspections.
KEY BENEFITS
Unmatched Ultra-High performance
Analog Gain No longer required (acquires the full dynamic range at
once
with a 27-bit A-scan resolution)
Outstanding acquired dynamic range (156dB)
Full-parallel 8ch
400V pulser as standard
±100V AWG (Arbitrary Waveform Generator) in standard too NDT Wide |  | OEM-PA Mini Advanced Digital I/O and Encoder support for robotics and high speed
inspection automation.
Seamless integration with a very compact form factor allowing for on-
scanner placement as well as perfect for within tightly integrated
systems
Very-small form factor for easier and simple integration (3D models
and
2D drawings available for customers)
Very-low power consumption for an advanced PA electronics making it
possible for use with integrated battery solutions, smaller power
supplies…etc
Low frequency Option: Ultrawide bandwidth opens door for more use
cases
like guided waves, concrete inspection and SHM applications
Excellent Support and Documentation! Speak directly to our engineers
for integration needs, software training NDT Wide |  | FMC/TFM Next generation for Phased Array UT is here now with FMC/TFM! Have higher
resolution imaging, improved signal to noise ratio, characterize, size and analyze
defects better with access to several wave mode views and save raw FMC data for
higher quality analysis. Some of the benefits are:
#Beautiful Image! Easier to understand what you're looking at #Completely focused in entire image or volume #Much easier to define setups before inspection #Easier to decipher geometry echoes from real defects #Oriented defects (e.g. cracks) are imaged better #See image from different wave modes from one FMC inspection #FMC data can be reprocessed/analyzed without going back to the field Ultrasonic Testing > Equipment > Phased Array Systems |
|