The Largest Open Access Portal of Nondestructive Testing (NDT)

Top 20 Posts (replies)
last 30 days
ET (14) Select: ET (14) Ultrasonic test austenitic cast steels (10) T-joint with backing metal strip - phant... (8) ToFD inMX2 (7) Why sizing @ 20% and below FSH is not re... (7) Olympus 38DL Plus Question (6) Re: ET (5) Phased Array for Flat Composite Laminate... (5) IQI selection for job thickness (5) depth location tolerance (5) IQI selection problem (5) about focus depth in paut (4) about numbers of beam in paut weld inspe... (4) Paut sweep angle (4) probe size in paut (4) Thickness gauge (4) UTG examination (4) USM Go - (3) Helium Leak Test (3) minimum numbers of TCG point (3)

Top 20 Posts (views)
last 30 days
Advanced NDT Engineer / Inspector ( PAUT... (1378) Select: Advanced NDT Engineer / Inspector ( PAUT... (1378) NDT Inspectors (1293) NDT LEVEL III FRESHERS AND EXPERIENCED (1056) NDT Techs Required Advanced and Conventi... (966) Very urgent requirement (864) NON DESTRUCTIVE TESTING INSPECTOR (RT,MT... (807) Radiographer vacancy (706) NDT Inspector (PT) Level 2 per EN 4179 (668) UT Technician (635) T-joint with backing metal strip - phant... (603) MT , PT Technician Level 2 (583) PCN PAUT & TOFD Level 2 (558) UT technician certified 3.2/3.9 (557) Required RTFI (ASNT/PCN) (547) NDT (EC,MT,UT) Level II or Level III (542) PCN Level 2 in UT,MT & PT required urgen... (523) PCN/CSWIP Level II PAUT and TOFD Inspect... (508) NDT FRESHERS REQUIRED FOR MPT (484) TOFD / PAUT Level II technician (479) UT Operator needed (472)