The Largest Open Access Portal of Nondestructive Testing (NDT)

Top 20 Posts (replies)
last 30 days
PAUT Calibration Difficulty With Notch F... (14) Select: PAUT Calibration Difficulty With Notch F... (14) Phased Array vs RT (10) the confusion on Omniscan SX (10) panametrics videoscan tranducers (7) the minimum number of exposures required... (7) TFM limitations (5) UT Calibration using (mm dia. ERG) (5) Physical meaning of wave dispersion (5) Why two Gauss meter show to much differe... (5) The use of radiography for thickness mea... (4) Piping calibration block for UT (4) Tomoview Display (4) Welding Neck Flanges Scanning Plan (4) ASME Sec V, NDE Level II and III Recerti... (4) which one should we use (4) AUT vs PAUT Hydroform (3) 45 degree probe calibration (3) PAUT-NO THRESHOLDING (3) Inspection of Process pipes into a guard... (3) Iso 9712 vs pcn (3)

Top 20 Posts (views)
last 30 days
NDT Level III Opening (1599) Select: NDT Level III Opening (1599) NDT Technician (971) NDT Technician (884) NDT inspectors to work in Projects in Om... (847) PAUT Calibration Difficulty With Notch F... (814) NDT technician PAUT/UT/RT (812) UT Technician urgently needed (800) Advanced NDT Inspectors (682) Phased Array vs RT (677) Inspectors (600) Urgent Requirement for PAUT operators (568) Urgently required UT technicians For Sau... (567) PCN NDT Technician (533) Require UT/MT/PT Technicians (523) NDT technician (521) Level II UT - Phased Array (520) Urgent requirement of UT Technician (517) Tomoview Display (510) URGENT REQUIREMENT FOR PCN/ISO 9712/SNT-... (486) We Looking For PCN Technician (483)