The Largest Open Access Portal of Nondestructive Testing (NDT)

Top 20 Posts (replies)
last 30 days
ET (13) Select: ET (13) UTG examination (8) T-joint with backing metal strip - phant... (8) ToFD inMX2 (7) Ultrasonic test austenitic cast steels (6) Olympus 38DL Plus Question (6) Why sizing @ 20% and below FSH is not re... (6) Re: ET (5) IQI selection for job thickness (5) depth location tolerance (5) TCG (4) Single porosity detection (4) about numbers of beam in paut weld inspe... (4) probe size in paut (4) Paut sweep angle (4) about focus depth in paut (4) ASME V art 14 (3) USM Go - (3) TFM (3) Helium Leak Test (3)

Top 20 Posts (views)
last 30 days
QA/QC WELDING INSPECTOR (CSWIP 3.1) (1674) Select: QA/QC WELDING INSPECTOR (CSWIP 3.1) (1674) Required ASNT - II candidates immediatel... (1371) Advanced NDT Engineer / Inspector ( PAUT... (1349) NDT Inspectors (1255) NDT LEVEL III FRESHERS AND EXPERIENCED (1035) Very urgent requirement (841) NDT Techs Required Advanced and Conventi... (827) NON DESTRUCTIVE TESTING INSPECTOR (RT,MT... (756) Shutdown Requirement for NDT-Multi techn... (750) Radiographer vacancy (691) NDT Inspector (PT) Level 2 per EN 4179 (633) PAUT TECHNICIAN (629) UT Technician (598) UT technician certified 3.2/3.9 (537) PCN PAUT & TOFD Level 2 (523) MT , PT Technician Level 2 (499) PCN/CSWIP Level II PAUT and TOFD Inspect... (498) PCN Level 2 in UT,MT & PT required urgen... (485) NDT (EC,MT,UT) Level II or Level III (469) NDT FRESHERS REQUIRED FOR MPT (465)