where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
976 views
Technical Discussions
hcumbaa
NDT Inspector,
USA, Joined Aug 2007, 10

hcumbaa

NDT Inspector,
USA,
Joined Aug 2007
10
02:53 Dec-12-2006
weld inspection

1 plate is .600" the other is .750" thick angle beam inspection do you ut for both thicknesess when shooting from the thinner side or the thinner member twice? if you can associate a technique it would be appreciated Thanks


 
 Reply 
 
Roberto Falconio
Engineering, NDT/Metrology SUPERVISOR
El Salvador, Joined Feb 2000, 13

Roberto Falconio

Engineering, NDT/Metrology SUPERVISOR
El Salvador,
Joined Feb 2000
13
05:01 Dec-13-2006
Re: weld inspection
Hi Cumbaa,

could you please specify the type of joint and bevel?
regards
RF

----------- Start Original Message -----------
: 1 plate is .600" the other is .750" thick angle beam inspection do you ut for both thicknesess when shooting from the thinner side or the thinner member twice? if you can associate a technique it would be appreciated Thanks
------------ End Original Message ------------




 
 Reply 
 
Herbert Cumbaa
NDT Inspector,
USA, Joined Aug 2007, 10

Herbert Cumbaa

NDT Inspector,
USA,
Joined Aug 2007
10
03:12 Dec-19-2006
Re: weld inspection

it's a V-bevel full penetration, no backing, structural use.




 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window