where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1003 views
Technical Discussions
hcumbaa
NDT Inspector,
USA, Joined Aug 2007, 10

hcumbaa

NDT Inspector,
USA,
Joined Aug 2007
10
02:53 Dec-12-2006
weld inspection

1 plate is .600" the other is .750" thick angle beam inspection do you ut for both thicknesess when shooting from the thinner side or the thinner member twice? if you can associate a technique it would be appreciated Thanks


 
 Reply 
 
Roberto Falconio
Engineering, NDT/Metrology SUPERVISOR
El Salvador, Joined Feb 2000, 13

Roberto Falconio

Engineering, NDT/Metrology SUPERVISOR
El Salvador,
Joined Feb 2000
13
05:01 Dec-13-2006
Re: weld inspection
Hi Cumbaa,

could you please specify the type of joint and bevel?
regards
RF

----------- Start Original Message -----------
: 1 plate is .600" the other is .750" thick angle beam inspection do you ut for both thicknesess when shooting from the thinner side or the thinner member twice? if you can associate a technique it would be appreciated Thanks
------------ End Original Message ------------




 
 Reply 
 
Herbert Cumbaa
NDT Inspector,
USA, Joined Aug 2007, 10

Herbert Cumbaa

NDT Inspector,
USA,
Joined Aug 2007
10
03:12 Dec-19-2006
Re: weld inspection

it's a V-bevel full penetration, no backing, structural use.




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window