where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1172 views
Technical Discussions
young chul jung
young chul jung
09:44 Feb-11-2000
NDT methods for the structural foundation

I was searching information about present NDT methods for the inspection of civil engineering structural foundation.
i could not find any papers but one i have now. could anyone give me any references or information about this issue?

thank you very much


 
 Reply 
 
Edouard G. Nesvijski
R & D, Senior Scientist
TRS Technologies, USA, Joined Jan 2000, 9

Edouard G. Nesvijski

R & D, Senior Scientist
TRS Technologies,
USA,
Joined Jan 2000
9
04:47 Feb-15-2000
Re: NDT methods for the structural foundation
tive Evaluation: A Tool in Design, Manufacturing, and Service, CRC Press, 1997, -586 pages.

3. V. Dzenis. Application of the Ultrasonic Transducers with Point Contact for the Nondestructive Testing, "Zinatne" Publishing Houwe, Riga, Latvia, 1987, - 264 pages (in Russian).

Sincerely,
Edouard G. Nesvijski



 
 Reply 
 
Michael Dalichow
Michael Dalichow
06:33 Feb-16-2000
Re: NDT methods for the structural foundation
Dear Young:
The Fraunhofer-Institute Nondestructive Testing (IZFP) has developed a method to diagnose moisture content and distribution in concrete foundation using portable nondestructive teechniques. The "NMR-Inspect" system is based Hydrogen Nuclear Magnetic Resonance (1H-NMR).
Please contact Bernd Wolter at IZFP for more information by phone (+49 681 9302-3883) or email at wolter@izfp.fhg.de.



 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window