where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1203 views
Technical Discussions
Anish Kumar
R & D, Scientist
Indira Gandhi Centre for Atomic Research, India, Joined Mar 2000, 7

Anish Kumar

R & D, Scientist
Indira Gandhi Centre for Atomic Research,
India,
Joined Mar 2000
7
08:19 Apr-05-2000
Elastic Modulus

I am working on microstructural characterization in metallic materials, such as ferritic steels, Inconel 625 superalloy etc., using ultrasonic measurements. Quite often, I need the elastic modulus values of various types of precipitates for uderstanding the change in ultraosnic velocity with precipitation, such as M23C6, Cr2N, and Fe2Mo (Laves phase) in steels and gamma prime, gamma double prime, delta and Ni2Mo type of precipitates in Superalloys. Is there some publication or record where I can get these values, or if some body can supply these values i will be very much thankful to him.

Thanking You.

Anish Kumar


 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 181

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
181
09:12 Apr-05-2000
Re: Elastic Modulus
onic waves directly.
Therefore again my recommendation: You have to measure the velocities on suited samples of your material.

Kind regards
Udo Schlengermann
------------
: I am working on microstructural characterization in metallic materials, such as ferritic steels, Inconel 625 superalloy etc., using ultrasonic measurements. Quite often, I need the elastic modulus values of various types of precipitates for uderstanding the change in ultraosnic velocity with precipitation, such as M23C6, Cr2N, and Fe2Mo (Laves phase) in steels and gamma prime, gamma double prime, delta and Ni2Mo type of precipitates in Superalloys. Is there some publication or record where I can get these values, or if some body can supply these values i will be very much thankful to him.

: Thanking You.

: Anish Kumar




 
 Reply 
 
mahmoodnajafi
mahmoodnajafi
09:10 Apr-24-2000
Re: Elastic Modulus

: I am working on microstructural characterization in metallic materials, such as ferritic steels, Inconel 625 superalloy etc., using ultrasonic measurements. Quite often, I need the elastic modulus values of various types of precipitates for uderstanding the change in ultraosnic velocity with precipitation, such as M23C6, Cr2N, and Fe2Mo (Laves phase) in steels and gamma prime, gamma double prime, delta and Ni2Mo type of precipitates in Superalloys. Is there some publication or record where I can get these values, or if some body can supply these values i will be very much thankful to him.

: Thanking You.

: Anish Kumar




 
 Reply 
 
mahmood Najafi
mahmood Najafi
09:10 Apr-24-2000
Re: Elastic Modulus

: I am working on microstructural characterization in metallic materials, such as ferritic steels, Inconel 625 superalloy etc., using ultrasonic measurements. Quite often, I need the elastic modulus values of various types of precipitates for uderstanding the change in ultraosnic velocity with precipitation, such as M23C6, Cr2N, and Fe2Mo (Laves phase) in steels and gamma prime, gamma double prime, delta and Ni2Mo type of precipitates in Superalloys. Is there some publication or record where I can get these values, or if some body can supply these values i will be very much thankful to him.

: Thanking You.

: Anish Kumar




 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window