where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
838 views
Technical Discussions
Micheal Park
R & D
Worltech R&D Center, South Korea, Joined Oct 1999, 5

Micheal Park

R & D
Worltech R&D Center,
South Korea,
Joined Oct 1999
5
00:39 Apr-25-2000
Ultrasonic inspection for car manufacturing

Dear Sir

I am researching new method for replace old testing method in car manufacturing.
In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
Does any one knows systems which is available to this appllication?
Any comment will be appreciated.
Thank you!




    
 
 Reply 
 
Trevor Easton
Engineering
Dofasco Inc, Canada, Joined Nov 1998, 13

Trevor Easton

Engineering
Dofasco Inc,
Canada,
Joined Nov 1998
13
03:35 Apr-25-2000
Re: Ultrasonic inspection for car manufacturing
: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

:
Take a look at http://www.epdtech.com/ultra/up100.htm for one example



    
 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 522

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
522
04:11 Apr-25-2000
Re: Ultrasonic inspection for car manufacturing
SDT system will do this kind of thing very easily (some info on our web page http;//www.sonatest-plc.com)

You dont say where you are, so suggest you send me your details privately and I'll have someone contact you

Best Regards

Joe Buckley


: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

:




    
 
 Reply 
 
N.Valliyappan David
Student, Research Assistant
National University of Malaysia, Malaysia, Joined Jan 2000, 4

N.Valliyappan David

Student, Research Assistant
National University of Malaysia,
Malaysia,
Joined Jan 2000
4
09:15 Apr-26-2000
Re: Ultrasonic inspection for car manufacturing
: Dear Sir

: I am researching new method for replace old testing method in car manufacturing.
: In final water proof test which check rubber packing of car door and trunk , car must go through water shower line. But I want to replace this test method to ultrasonics.
: I think it would be possible when we locate tone generator inside the car and check ultrasonic amplitude outside the car.
: And I heard some of car manufacturer adopted this method to testing water proof capability of door and trunk.
: Does any one knows systems which is available to this appllication?
: Any comment will be appreciated.
: Thank you!

Dear Sir,

I believe Ultraprobe 9000 could be one of your solutions.
Please visit this site :
http://www.uesystems.com
for the product.




    
 
 Reply 
 

Product Spotlight

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window