where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.

587 views
Career Discussions
Ema
Ema
01:36 Aug-17-2005
Remaining life and replica

Is it true that Replica result can calculate remaining life of material? some guy told me that they only do replica test and they will know the life time remaining of pipe,vessel,tank!??





 
 Reply 
 
Ananthan
Consultant,
RAA Tech Solutions, India, Joined Jun 2000, 36

Ananthan

Consultant,
RAA Tech Solutions,
India,
Joined Jun 2000
36
03:35 Sep-01-2005
Re: Remaining life and replica
----------- Start Original Message -----------
: Is it true that Replica result can calculate remaining life of material? some guy told me that they only do replica test and they will know the life time remaining of pipe,vessel,tank!??
------------ End Original Message ------------

Replica tells yopu the present condition of the material. By estimating the creep cavities one can estimate the remaining life or at least the next required inspection schedule.

S S Ananthan


 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window