where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
6003 views
Career Discussions
Mike Ambion
Consultant, Supervisor
Singapore, Joined Sep 2006, 2

Mike Ambion

Consultant, Supervisor
Singapore,
Joined Sep 2006
2
08:50 Jun-28-2007
NDT Training Seminar

Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?




 
 Reply 
 
RENATO T. BANAGA
Engineering,
Philippine Nuclear Research Institute (PNRI), Philippines, Joined Jul 2005, 8

RENATO T. BANAGA

Engineering,
Philippine Nuclear Research Institute (PNRI),
Philippines,
Joined Jul 2005
8
00:31 Jun-28-2007
Re: NDT Training Seminar
----------- Start Original Message -----------
: Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?
------------ End Original Message ------------

The Philippine Nuclear Research institute(PNRI) in collaboration with the Philippine Society for Non-Destructive Testing (PSNT) conducts regular NDT Training courses which includes MPI as your interest.
The Cost of Training is about PHP 13,000.


 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 159

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
159
01:07 Jun-29-2007
Re: NDT Training Seminar
----------- Start Original Message -----------
: : Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?
You could try the TWI now based in Malaysia they may be consider running training in the Philippines, details below:
Mike Trinidad

TWI Training and Certification Sdn. Bhd.

No 8 Jalan TSB10,

Sg Buloh Industrial Park,

47000 Sungai Buloh,

Selangor Darul Ehsan,

Malaysia

PH: (603) 6157 3526

FX: (603) 6157 2378

Regards

Neil Burleigh



 
 Reply 
 
Mustafa Sirin
Engineering, UT, RT, MT, PT, VT, AT Level III (ISO 9712), Welding Engineer
TÜV Austria Turk, Turkey, Joined Oct 2004, 1

Mustafa Sirin

Engineering, UT, RT, MT, PT, VT, AT Level III (ISO 9712), Welding Engineer
TÜV Austria Turk,
Turkey,
Joined Oct 2004
1
01:38 Jun-29-2007
Re: NDT Training Seminar
----------- Start Original Message -----------
: Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?
------------ End Original Message ------------

Hi,
I'm a EN 473 NDT Level II in the methods RT, UT, MT, PT from Turkish Atomic Energy Authority, Mechanical Engineer, International Welding Engineer and Diver.

I have worked with Iron Steel Plants and Line Pipe Production and Inspection as a Quality Coordinator during the 1989 to 2007 years.

I do have a Inspection & NDT Facility in Pipe Plants and lines.

I'm interesting to underwater NDT training. I want to training and qualification about Underwater NDT

Can you help to me.

Sincerely,

Mustafa Sirin
RT, UT, MT, PT Level II
Mechanical and Welding Engineer
CMAS One Star Diver



 
 Reply 
 
Floyd Atkinson
NDT Inspector
American Inspection Society, Inc., USA, Joined Jun 2004, 10

Floyd Atkinson

NDT Inspector
American Inspection Society, Inc.,
USA,
Joined Jun 2004
10
08:26 Jun-29-2007
Re: NDT Training Seminar
Contact: The Ocean Corporation,10840 Rockley RD, Houston, Texas, USA; 1-800-321-0298; www.oceancorp.com

----------- Start Original Message -----------
: : Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?
: Hi,
: I'm a EN 473 NDT Level II in the methods RT, UT, MT, PT from Turkish Atomic Energy Authority, Mechanical Engineer, International Welding Engineer and Diver.
:
: I have worked with Iron Steel Plants and Line Pipe Production and Inspection as a Quality Coordinator during the 1989 to 2007 years.
: I do have a Inspection & NDT Facility in Pipe Plants and lines.
: I'm interesting to underwater NDT training. I want to training and qualification about Underwater NDT
:
: Can you help to me.
:
: Sincerely,
:
: Mustafa Sirin
: RT, UT, MT, PT Level II
: Mechanical and Welding Engineer
: CMAS One Star Diver
------------ End Original Message ------------




 
 Reply 
 
Ed
Ed
09:25 Jul-01-2007
Re: NDT Training Seminar
----------- Start Original Message -----------
: Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?
------------ End Original Message ------------

Try this link:
http://www.ici-philippines.com/



 
 Reply 
 
fareed fadl allah mergani
fareed fadl allah mergani
02:51 Oct-03-2007
Re: NDT master
----------- Start Original Message -----------
I,m fareed , from sudan atomic energy commission ,ihave level-1 in PT;RT;MT ,I,m chemist ; also i have diploma in nuclear science ..i want to do master in NDT related to chemistry ...
can you help me??


 
 Reply 
 
Paul Arvin M. galario
Paul Arvin M. galario
03:04 Oct-22-2007
Re: NDT Training Seminar
Try visit our website www.aes.com.ph
hope to satisfy your needs for NDT Training.


----------- Start Original Message -----------
: Contact: The Ocean Corporation,10840 Rockley RD, Houston, Texas, USA; 1-800-321-0298; www.oceancorp.com
: : : Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?
: : Hi,
: : I'm a EN 473 NDT Level II in the methods RT, UT, MT, PT from Turkish Atomic Energy Authority, Mechanical Engineer, International Welding Engineer and Diver.
: :
: : I have worked with Iron Steel Plants and Line Pipe Production and Inspection as a Quality Coordinator during the 1989 to 2007 years.
: : I do have a Inspection & NDT Facility in Pipe Plants and lines.
: : I'm interesting to underwater NDT training. I want to training and qualification about Underwater NDT
: :
: : Can you help to me.
: :
: : Sincerely,
: :
: : Mustafa Sirin
: : RT, UT, MT, PT Level II
: : Mechanical and Welding Engineer
: : CMAS One Star Diver
------------ End Original Message ------------




 
 Reply 
 
Paul Galario
Paul Galario
01:19 Jan-15-2008
Re: NDT Training Seminar
Sir, you can try browsing this site http://www.aes.com.ph this is a NDT training center located in Philippines.

----------- Start Original Message -----------
: : : Does anyone now who gives training and seminar for NDT and MPI in the Philippines. Pls. give the contact details and how much would it cost?
: You could try the TWI now based in Malaysia they may be consider running training in the Philippines, details below:
: Mike Trinidad
: TWI Training and Certification Sdn. Bhd.
: No 8 Jalan TSB10,
: Sg Buloh Industrial Park,
: 47000 Sungai Buloh,
: Selangor Darul Ehsan,
: Malaysia
: PH: (603) 6157 3526
: FX: (603) 6157 2378
: Regards
: Neil Burleigh
------------ End Original Message ------------




 
 Reply 
 
marzuki
marzuki
05:36 Feb-05-2010
Re: NDT Training Seminar
In Reply to Neil Burleigh at 01:07 Jun-29-2007 .

how to join NDT training seminar and how much cost? my qualification in diploma process instrumentation and control.

 
 Reply 
 
emmanuel pasuit
emmanuel pasuit
16:28 Aug-15-2011
Re: NDT Training Seminar
In Reply to RENATO T. BANAGA at 00:31 Jun-28-2007 .

gud day..sir i would like to us if this training is limited only to ndt,and if so where can i find a training center in philippines for q/a q/c piping inspector?i work as a pipe fitter here abroad but my job is to inspect all line b4 giving to the client the package.my work is to inspect line check support as per drawing as well as the correct gasket etc...can you give me some info if you have?thanks and God bless!

 
 Reply 
 
RENATO T. BANAGA
Engineering,
Philippine Nuclear Research Institute (PNRI), Philippines, Joined Jul 2005, 8

RENATO T. BANAGA

Engineering,
Philippine Nuclear Research Institute (PNRI),
Philippines,
Joined Jul 2005
8
06:48 Aug-17-2011
Re: NDT Training Seminar
In Reply to emmanuel pasuit at 16:28 Aug-15-2011 .

Philippine Nuclear Research Institute (PNRI) and in collaboration with the Philippine Society for Nondestructive Testing (PSNT) conducts regular training courses on Nondestructive Testing (NDT) and other related training courses especially on radiation safety aspect.

 
 Reply 
 
Lalit Mohan Kothari
Consultant, -
On ..IOCL and BARC(Bhabha Atomic Research Centre).etc, India, Joined Jan 2003, 128

Lalit Mohan Kothari

Consultant, -
On ..IOCL and BARC(Bhabha Atomic Research Centre).etc,
India,
Joined Jan 2003
128
10:02 Aug-17-2011
Re: NDT Training Seminar
In Reply to RENATO T. BANAGA at 00:31 Jun-28-2007 .

mIKE,
jUST VISIT WWW.AES.COM.PH .ON BEHALF OF ME LALIT MOHAN KOTHARI
THANKS & REGARD

 
 Reply 
 
harmon bulalacao
harmon bulalacao
07:43 Jan-06-2014
Re: NDT Training Seminar
In Reply to RENATO T. BANAGA at 00:31 Jun-28-2007 .

on going pa rin po ito sir?

 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window