where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
9829 views
Career Discussions
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 868

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
868
07:33 Jun-25-2008
PCN?

I visited the BINDT site and still don't know what PCN stands for. Can someone tells me?


 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
01:53 Jun-25-2008
Re: PCN?
----------- Start Original Message -----------
: I visited the BINDT site and still don't know what PCN stands for. Can someone tells me?
------------ End Original Message ------------

I will check with the official man tomorrow, But it is variously stated as Personal or Personnel Certification for Non-destructive Testing

a Bit like what does DVD stand for - depends who you ask...


Joe




 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
03:04 Jun-25-2008
Re: PCN?
PCN stands for "Personnel Certification in Non-Destructive Testing". I added the term with explanation to the NDT Encyclopedia here: www.ndt.net/ndtaz/ndtaz.php?id=700

I would like to remember that everybody of the forum members have access to the Encyclopedia to enter new terms or write comments for existing terms.

Rolf

----------- Start Original Message -----------
: I visited the BINDT site and still don't know what PCN stands for. Can someone tells me?
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 868

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
868
01:18 Jun-25-2008
Re: PCN?
Hi Rolf,

This answer my question, but also bring out more. You state in the Encyclopedia and read the same on the BINDT site: "The PCN scheme, an internationally recognised scheme for the certification competence of NDT personnel, is accredited as meeting the requirements of European Standards EN 45013 and EN 473, and international standard ISO 9712."

My question is that since in Canada we are ISO 4712, could I apply to receive this qualifications? Also is this Cerification similar to ASNT TC-1A from the USA?

Cheerios,

Michel


----------- Start Original Message -----------
: PCN stands for "Personnel Certification in Non-Destructive Testing". I added the term with explanation to the NDT Encyclopedia here: www.ndt.net/ndtaz/ndtaz.php?id=700
: I would like to remember that everybody of the forum members have access to the Encyclopedia to enter new terms or write comments for existing terms.
: Rolf
: : I visited the BINDT site and still don't know what PCN stands for. Can someone tells me?
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
00:41 Jun-26-2008
Re: PCN?
Michel

You can't receive a PCN certificate without taking the PCN exams, but you can as a Canadian certificate holder be approved as equivalent for Pressure equipment work

www.bindt.org/downloads/PED19.doc

May be useful

SNT-TC-IA is very different, and not necessarily equivalent.

Joe


----------- Start Original Message -----------
: Hi Rolf,
: This answer my question, but also bring out more. You state in the Encyclopedia and read the same on the BINDT site: "The PCN scheme, an internationally recognised scheme for the certification competence of NDT personnel, is accredited as meeting the requirements of European Standards EN 45013 and EN 473, and international standard ISO 9712."
: My question is that since in Canada we are ISO 4712, could I apply to receive this qualifications? Also is this Cerification similar to ASNT TC-1A from the USA?
: Cheerios,
: Michel
:
: : PCN stands for "Personnel Certification in Non-Destructive Testing". I added the term with explanation to the NDT Encyclopedia here: www.ndt.net/ndtaz/ndtaz.php?id=700
: : I would like to remember that everybody of the forum members have access to the Encyclopedia to enter new terms or write comments for existing terms.
: : Rolf
: : : I visited the BINDT site and still don't know what PCN stands for. Can someone tells me?
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 868

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
868
03:22 Jun-26-2008
Re: PCN?
So would there be a place in Canada or the US where I could write the exams? And what is the difference between the EN473, PCN and CSWIP?

Michel

----------- Start Original Message -----------
: Michel
: You can't receive a PCN certificate without taking the PCN exams, but you can as a Canadian certificate holder be approved as equivalent for Pressure equipment work
: www.bindt.org/downloads/PED19.doc
: May be useful
: SNT-TC-IA is very different, and not necessarily equivalent.
: Joe
:
: : Hi Rolf,
: : This answer my question, but also bring out more. You state in the Encyclopedia and read the same on the BINDT site: "The PCN scheme, an internationally recognised scheme for the certification competence of NDT personnel, is accredited as meeting the requirements of European Standards EN 45013 and EN 473, and international standard ISO 9712."
: : My question is that since in Canada we are ISO 4712, could I apply to receive this qualifications? Also is this Cerification similar to ASNT TC-1A from the USA?
: : Cheerios,
: : Michel
: :
: : : PCN stands for "Personnel Certification in Non-Destructive Testing". I added the term with explanation to the NDT Encyclopedia here: www.ndt.net/ndtaz/ndtaz.php?id=700
: : : I would like to remember that everybody of the forum members have access to the Encyclopedia to enter new terms or write comments for existing terms.
: : : Rolf
: : : : I visited the BINDT site and still don't know what PCN stands for. Can someone tells me?
------------ End Original Message ------------




 
 Reply 
 
Dermot
Consultant, level 3 aerospace
Lufthansa Technik Airmotive Ireland, Ireland, Joined Oct 2007, 3

Dermot

Consultant, level 3 aerospace
Lufthansa Technik Airmotive Ireland,
Ireland,
Joined Oct 2007
3
03:07 Jun-26-2008
Re: PCN?
----------- Start Original Message -----------
: I visited the BINDT site and still don't know what PCN stands for. Can someone tells me?
------------ End Original Message ------------

Hi
'personnel certification in NDT'
As a level III for the past 20 years or so, this was burned into my head but in an attempt to satisfy your query I had a look at my certs and anywhere I could think of but, alas the cupboard was bare.
hope this helps,
regrads,
Dermot


 
 Reply 
 
Rohit Bafna
,
TCR Engineering Services, India, Joined Sep 2007, 18

Rohit Bafna

,
TCR Engineering Services,
India,
Joined Sep 2007
18
07:43 Jun-27-2008
Re: PCN?
It stands for
Personnel Certification in Non-Destructive Testing

Rohit Bafna
www.tcr-arabia.com


 
 Reply 
 
Isaac Chavez
Isaac Chavez
12:49 Jul-09-2016
Re: PCN?
In Reply to Michel Couture at 03:22 Jun-26-2008 .

Lavender International Located in Houston TX. I believe Is the only one in the USA to offer the PCN training and testing scheme. My email ISAAC.CHAVEZ@MISTRASGROUP.COM if you would like more info on lavender. hope this helps.

 
 Reply 
 
Charlie Jackson
Charlie Jackson
08:11 Jul-10-2016
Re: PCN?
In Reply to Michel Couture at 07:33 Jun-25-2008 (Opening).

Michel

Unless you feel the need to hold PCN qualifications there is no need as long as your present qualifications are ISO 9712 approved.
Having been in the industry for 40+years and currently holding CSWIP, PCN and ASNT qualifications I have to admit we carry the certs because we have to. I would suggest you satisfy the standard you are using with regard to qualification and if you need to change for your job do it then.
Regards
Charlie

 
 Reply 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window