where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
The priority of the company is to design and create highly technological equipment, for professional users. Aiming to reach the devices top techn ...

648 views
Career Discussions
NEELA
NDT Inspector
central polytechnic, Ukraine, Joined Sep 2004, 9

NEELA

NDT Inspector
central polytechnic,
Ukraine,
Joined Sep 2004
9
08:54 Jul-06-2008
Comparision of CP-189-SNT-TC-1A

Please give any information about-
What is ASNT CP-106-2007 (is it a replica of ISO9712)?

I am still not clear why CP 189 or CP106 are being published by ASNT
when SNT-TC-1A is simultaneously revised?


 
 Reply 
 
RT. Jeyakumar
RT. Jeyakumar
00:45 Jul-07-2008
Re: Comparision of CP-189-SNT-TC-1A
----------- Start Original Message -----------
: Please give any information about-
: What is ASNT CP-106-2007 (is it a replica of ISO9712)?
: I am still not clear why CP 189 or CP106 are being published by ASNT
: when SNT-TC-1A is simultaneously revised?
------------ End Original Message ------------

Good day,

ASNT SNT TC 1A is only a guide line for training & Certification for NDT Personnel. Whereas CP 189, is Standard practice for training & Certification of NDT Personnel. There are some mandatory statement saying that ASNT NDT Level III (atleast in one method) shall be a company NDT Level III. There is no clause for appointed NDT Level III.

Regards,

RT. Jeyakumar


 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window