where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
386 views
Job Offers
David S Forsyth
R & D
TRI/Austin, USA, Joined Nov 2001, 41

David S Forsyth

R & D
TRI/Austin,
USA,
Joined Nov 2001
41
03:11 Aug-25-2006
NDE junior scientist

Job Location: Austin, TX, USA
offered by  

NDE Scientist/Engineer

Texas Research Institute in Austin, Texas, has an immediate opening for a junior-level Nondestructive Evaluation (NDE) Scientist/Engineer. Responsibilities will include direct project work addressing a broad array of NDE problems for US Federal Agency customers. Additional responsibilities will include proposal writing, project management, and revenue generation. Prospective candidates should have a background in NDE and familiarity with a variety of different NDE techniques and their applications.

The successful candidate will be expected to assist in developing and implementing NDE technologies for commercial and government applications. The candidate must have good communication skills, be a self-starter and enjoy working in a team environment. At least a M.Sc. degree in physics, materials science, mechanical engineering, or aerospace engineering is required. Industrial, federal agency, or military experience is a plus.

US Citizenship is mandatory.

Graduate students near the end of their programs are welcome to apply.

Please email or fax resumes to: Resource Dept, jobs@tri-intl.com, 512-263-2387. EOE.


    
 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window