where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2091 views
Technical Discussions
Chris Coughlin
Chris Coughlin
00:42 Feb-21-2001
Low Frequency UT Pulser/Receiver Board

Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?

Thanks in advance,
Chris


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 283

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
283
00:26 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Try Physical Acoustics Princeton New Jersey www.pacndt.com. They had a PAC-IPR-90 Boards which went down to 100 Khz.


 
 Reply 
 
Wolfgang Hillger
Engineering
Ing.Büro/DLR, Germany, Joined Nov 1998, 5

Wolfgang Hillger

Engineering
Ing.Büro/DLR,
Germany,
Joined Nov 1998
5
09:14 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
Dear Chris,
our pulser/receiver PC-board HILL-SCAN 3041 with a frequency range from <1 kHz to 10 MHz (-3 dB) is optimized for low frequency applications. Please find a description on our hompage www.Dr-Hillger.de.
For low frequency ultrasonic testing, a rectangular or burst transmitter provides about 12 dB higher amplitudes than a common spike pulser. Such a transmitter on a PC-board is our HILL-SCAN 3100.




 
 Reply 
 
Rolf D. on behalf of Dr. Hillger
Engineering
Ing.Büro/DLR, Germany, Joined Nov 1998, 5

Rolf D. on behalf of Dr. Hillger

Engineering
Ing.Büro/DLR,
Germany,
Joined Nov 1998
5
09:49 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Please use for Forum Posts the email address of your Profile
or update your profile accordingly.

Rolf Diederichs

: : Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
: .
: : Thanks in advance,
: : Chris
: .
: Dear Chris,
: our pulser/receiver PC-board HILL-SCAN 3041 with a frequency range from <1 kHz to 10 MHz (-3 dB) is optimized for low frequency applications. Please find a description on our hompage www.Dr-Hillger.de.
: For low frequency ultrasonic testing, a rectangular or burst transmitter provides about 12 dB higher amplitudes than a common spike pulser. Such a transmitter on a PC-board is our HILL-SCAN 3100.
:
.



 
 Reply 
 
Michael H. Dalichow
Michael H. Dalichow
00:53 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Dear Chris:
Quality Network, Inc. (QNET) offers pulser/receiver and A/DC boards for various applications. The standard frequency range of 500kHz to 20MHz can be complimented with optional frequency filters ranging from 20kHz to 27MHz, and we can provide you with virtually any brad or narrow band filter within this range. For more information please logon to http://www.qnetworld.com/ultrasonic_testing/pcus_11.html.
I you have any questions please send email or call (973) 726-8399.
Sincerely, Michael


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 276

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
276
00:59 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
We can offer you such board (with PCI connector and external pulser, that can be adapted to your needs).

Wieslaw Bicz



 
 Reply 
 
Hanspeter Loertscher
Hanspeter Loertscher
00:38 Feb-23-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
We at QMI can offer you a PCI card for ultrasonic testing in the frequency range of 30kHz to 1 MHz. The card is mounted in a metal case for shielding purposes and is used for multichannel systems. QMI recently installed an air-coupled ultrasonic scanning system using 8 of these cards. This system was presented at the WCNDT in Rome as paper idn209. See ndt.net.


 
 Reply 
 

Product Spotlight

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window