where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Waygate Technologies
Waygate Technologies, a Baker Hughes business (formerly GE Inspection Technologies), is an industrial inspection solutions company and the world ...
231 views
Job Offers
JHill
Director, Field Operations
IMAC, USA, Joined Jun 2008, 4

JHill

Director, Field Operations
IMAC,
USA,
Joined Jun 2008
4
04:43 Jun-16-2008
NDT Level III MT

Posted by  
Job Location: MI, USA

THIS POSITION IS OPEN TO U.S. CITIZENS ONLY DUE TO THE CONTRACTORS ASSOCIATION WITH THE DEPARTMENT OF DEFENSE. I have an opening for a temporary position: NDT Level III MT Specialist. The job is slated to start at the beginning of July, 2008. The position would require crossing a picket line during a labor dispute. The job details are as follows:
Position Summary: The NDT Level III Specialist reports to the Quality Leader and is responsible for the day-to-day technical support for all nondestructive testing. This individual will apply the NDT technologies of Magnetic Particle Inspection (MT). This individual will work in concert with the Quality Leader to provide the overall technical leadership and future development direction for Nondestructive Evaluation at our client's facility.
· Will make final determination on acceptability of questionable hardware found by the NDT process, maintain all necessary documentation of the controls of the NDT processes, including their solutions and equipment.
·Will develop, update and institute NDT procedures and work instructions as required for existing equipment and implement new NDT inspection equipment, including necessary capability studies, procedures, work instructions and inspector training.
Position Requirements: The position requires a NDT level III MT certification.
Compensation: Hourly rate of $25.00. Perdiem $35.00 a day. Housing provided. Will be working 7 days a week 12 hours per day. Reply by email for consideration.


 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window