where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

319 views
Job Offers
J.Hill
Director, Field Operations
IMAC, USA, Joined Jun 2008, 4

J.Hill

Director, Field Operations
IMAC,
USA,
Joined Jun 2008
4
06:20 Jun-24-2008
NDT Level II or III

Posted by  
Job Location: MI-USA

THIS POSITION IS OPEN TO U.S. CITIZENS ONLY DUE TO THE CONTRACTORS ASSOCIATION WITH THE DEPARTMENT OF DEFENSE. IMAC has an opening for a temporary position: NDT Level II or III MT Specialist. The job is slated to start the first week of July, 2008. The position would require crossing a picket line during a labor dispute. The job details are as follows:
Position Summary: The NDT Level II or III Specialist reports to the Quality Leader and is responsible for the day-to-day technical support for all nondestructive testing. This individual will apply the NDT technologies of Magnetic Particle Inspection (MT). This individual will work in concert with the Quality Leader to provide the overall technical leadership for Nondestructive Evaluation at our client's facility.
· Will make final determination on acceptability of questionable hardware found by the NDT process, maintain all necessary documentation of the controls of the NDT processes, including their solutions and equipment.
· Will develop, update and institute NDT procedures and work instructions as required for existing equipment and implement new NDT inspection equipment, including necessary capability studies, procedures, work instructions and inspector training.
Position Requirements: The position requires a NDT level II or III MT certification.
Compensation: Hourly rate of $30.00 per hour level II or $35.00 per hour level III. Perdiem $35.00 a day. Housing and travel provided. Will be working 7 days a week 12 hours per day. Reply by email for consideration.


 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window