where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2729 views
Technical Discussions
ashraf samir
NDT Inspector
petrojet, Egypt, Joined Apr 2001, 2

ashraf samir

NDT Inspector
petrojet,
Egypt,
Joined Apr 2001
2
01:39 Apr-29-2001
what is lack of cross penetration lack of inter-run fusion

what is lack of inter-run fusion and lack of cross penetration in semi auto GTAW , what is the difference between it and cold lap and lack of side wall fushion .


 
 Reply 
 
Anonymous
Anonymous
03:37 Apr-29-2001
Re: what is lack of cross penetration lack of inter-run fusion
: what is lack of inter-run fusion and lack of cross penetration in semi auto GTAW , what is the difference between it and cold lap and lack of side wall fushion .
.
Sorry, I first posted this under the wrong subject. However, the main difference between inter-run fusuion, lack of cross penetration, cold lap and side wall fusion is "location in the weld". Lack of cross pen occurs when welding the root internally and the hot pass externally. If you do not get adequate penetration with your hot pass, you will get lack of cross penetration. Cold lap, side wall and inter-run fusion occur from inadequate heat input or improper welding technique.


 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window