where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
742 views
Career Discussions
Herb
NDT Inspector,
USA, Joined Aug 2007, 10

Herb

NDT Inspector,
USA,
Joined Aug 2007
10
02:27 Mar-20-2009
NBIC VS ASNT Level III

In todays economy which certification would be most beneficial to obtain if you had to choose one ? the NBIC "A" Inspector or the ASNT Level III certification.

 
 Reply 
 
Hassan AL-Dubian
Hassan AL-Dubian
08:45 Mar-20-2009
Re: NBIC VS ASNT Level III
In Reply to Herb at 02:27 Mar-20-2009 (Opening).

I meant ASNT level III for the following:

1- RT
2- UT
3- PT
4- MT
5- VT

 
 Reply 
 
HERB
NDT Inspector,
USA, Joined Aug 2007, 10

HERB

NDT Inspector,
USA,
Joined Aug 2007
10
11:51 Mar-20-2009
Re: NBIC VS ASNT Level III
In Reply to Herb at 02:27 Mar-20-2009 (Opening).

I forgot to add the ASNT certification will be in Ultrasonics

 
 Reply 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window