where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GE Inspection Technologies
Inspection Technologies, a business of the Baker Hughes, a GE company (BHGE IT), is one of the world's leading suppliers of nondestructive testin ...
1188 views
Technical Discussions
Dr. Ahmed Yamani
Director, - President & CEO
Yamani Institute of Technology, Algeria, Joined Nov 2001, 23

Dr. Ahmed Yamani

Director, - President & CEO
Yamani Institute of Technology,
Algeria,
Joined Nov 2001
23
17:22 Mar-27-2009
What is the best LRGUT machine available

Dear All,

I appreciate very much if one could tell me what is the best long range Guided UT machine available on the market when comparing price versus capabilities. I know there are few on the market but I am sure that from your experience one would gather useful information.
Can you also include the approximate cost of each if possible. Thank you and have a nice weekend.

you can reach me directly at yamani@tesci.net.

 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
11:24 Mar-28-2009
Re: What is the best LRGUT machine available
In Reply to Dr. Ahmed Yamani at 17:22 Mar-27-2009 (Opening).

Its a good question and you will get many answers its a bit like asking 10 experts the same question you will get 20 different answers. I am sure all of the manufacturers will quickly be posting extolling the virtues of their systems. If you are going to compare price you are heading down the wrong path as cost should not be the first consideration. Define what you want to do with the technology and in what configurations, access etc. The more complex the application the greater the emphasis will be on training, experience support etc. The further away from the manufacturers the greater dependence upon equipment reliability. Ask how many systems each has in the field - the more the better as it demonstrates some degree of customer preferred selection.
Look where they are going with the technology - future add ons, developments etc.
Define a scope and then send to all the manufacturers, benchmark their response against a litreature or industry expert review and finally request a performance test. After this you should be able to decide which is the best for your circumstances.

 
 Reply 
 
Sang Kim
Consultant, NDT Trainer
Guided Wave Analysis LLC, USA, Joined Feb 2008, 44

Sang Kim

Consultant, NDT Trainer
Guided Wave Analysis LLC,
USA,
Joined Feb 2008
44
18:11 Mar-28-2009
Re: What is the best LRGUT machine available
In Reply to John O'Brien at 11:24 Mar-28-2009 .

I am happy to answer the question as a worldwide seller (except China) of one of long-range guided-Wave UT system – MsSR3030R. The following is the prices and capabilities:
1) Price of the whole system is less than $150,000 including 5-day Level-I training for long-range guided-wave technology, 50-hour continuous training during the 1st one year, MsSR3030R system and accessory, probes operating center frequencies of 32 and lower, 45-, 64-, 90-, 128-, 180-, and 250-kHz that will allow acquiring the guided wave data at any frequency between 8 kHz to 300 kHz.
2) Inspecting pipe size: 1/8-inch to 60-inch-OD pipe, pressure vessel bigger than 40-inch-OD using sectional probe
3) Clearance along the length of pipe, that is required for installing probe, is about 2.5 or 3 inches.
4) Wide frequency band inspection of between 10 and 250 kHz is possible with 2-inch-wide probe.
5) High temperature inspection for a pipe: less than 150 Celsius degree for inspection and 300 Celsius degree for monitoring (once the probe is bonded).
6) Allow installing probe if the pipe circumference of 70 percent or more is accessible. It allows guided-wave inspection without removing heat-tracer line.
7) Dead zone and near-field zone length are about 0.4 ft with 128 kHz, 0.7 ft with 64-kHz, and 1 ft with 32-kHz center frequency.
8) Long inspection range and high sensitivity with 360-degree covering guided wave probe. We claim that it is the best in any guided wave systems in the world.
9) The system can be used for inspecting anchor rod, plate, cable, heat-exchanger tube with additional training and probes.
10) One-year continuous training is supported by Level III guided-wave trainer.

The comparison test is the best way to compare the performance of guided-wave systems. Request a performance test (“Seeing is believing”) with a pipe sample and compare the guided-wave systems. Don’t judge with the performance and capability of the equipment with the price of equipment, how many equipment is sold, and how nice the brochure is. You will find who is afraid comparison test and who is blocking the comparison test in the market because of the poor performance with high price tag. Try to find who it is with the comparison test with pipe samples. For more information about long-range guided-wave system, please visit the following website (http://www.gwanalysis.com/).

Thanks,

Sang

 
 Reply 
 
Dr. Ahmed Yamani
Director, - President & CEO
Yamani Institute of Technology, Algeria, Joined Nov 2001, 23

Dr. Ahmed Yamani

Director, - President & CEO
Yamani Institute of Technology,
Algeria,
Joined Nov 2001
23
21:33 Mar-28-2009
Re: What is the best LRGUT machine available
In Reply to John O'Brien at 11:24 Mar-28-2009 .

Thank you Mr. John it is nice to hear from you it has been a long time...All the hypothesis you put forward are very much legitimate, but I wanted only a symple answer for a curious question that turns out to be a sensitive but important one.


Thank you Dr. Sang for the information regarding your system. I hope that a journal of NDT any one would reserve a page or two to review and compare technology tools especially if few only are on the market.... Thanks to all.

 
 Reply 
 

Product Spotlight

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window