where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2054 views
Technical Discussions
Kosmos Qwantum corp
NDT Inspector
Russia, Joined Jun 2001, 3

Kosmos Qwantum corp

NDT Inspector
Russia,
Joined Jun 2001
3
03:19 Jun-14-2001
Tank inspection

I would like to get information on equipment for tank inspection of the latest modification(I am interested in inspection of bottom and walls

Best regards Chairman of the Technical Committee
A.Petrov
WWW.UZK.RU


 
 Reply 
 
Art Leach
Sales
GE Inspection Technologies, USA, Joined Apr 2001, 12

Art Leach

Sales
GE Inspection Technologies,
USA,
Joined Apr 2001
12
07:58 Jun-14-2001
Re: Tank inspection
: I would like to get information on equipment for tank inspection of the latest modification(I am interested in inspection of bottom and walls
.
: Best regards Chairman of the Technical Committee
: A.Petrov
: WWW.UZK.RU
.
If you plan to perfrom Ultrasonic inspections, I suggest you look at the Krautkramer line of Digital Thickness Gauges and in particular the DMS 2 with TopCOAT technology for reading through costings. Krautkramer also offers software for the data recording instruments which allows you to document the results of thickness surveys in the field, transfer data to the computer and print reports.

Contact you local Krautkramer sales representative for additional details....They can be located from the web site directory.

Art.



 
 Reply 
 
Meindert Anderson
Director
Olympus, USA, Joined Dec 1999, 5

Meindert Anderson

Director
Olympus,
USA,
Joined Dec 1999
5
08:29 Jun-14-2001
Re: Tank inspection
You may also check out Panametrics' line of high-end thickness gages for corrosion applications. The 36DL PLUS (with A-Scan) has lots of practical features including Echo-to-Echo, B-Scan with waveform recall, and simultaneous viewing of both live A-Scan and B-Scan. More information, including representation in Russia, is available on the company's website.

Meindert Anderson

: : I would like to get information on equipment for tank inspection of the latest modification(I am interested in inspection of bottom and walls
: .
: : Best regards Chairman of the Technical Committee
: : A.Petrov
: : WWW.UZK.RU
: .
: If you plan to perfrom Ultrasonic inspections, I suggest you look at the Krautkramer line of Digital Thickness Gauges and in particular the DMS 2 with TopCOAT technology for reading through costings. Krautkramer also offers software for the data recording instruments which allows you to document the results of thickness surveys in the field, transfer data to the computer and print reports.
.
: Contact you local Krautkramer sales representative for additional details....They can be located from the web site directory.
.
: Art.
.



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
02:05 Jun-14-2001
Re: Tank inspection
You are asking a very large question which you need to split up into out of service and on-stream inspection.

You also need to differentiate between standard uninsulated atmospheric tanks, insulated low pressure tanks and non metallic tanks.

Carbon Steel Atmospheric Tanks make up the bulk of the industry and fall under codes such as API 650/653 and EEMUA 159.

In service you can get at shells and roofs to perform UT thickness surveys with a wide range of ultrasonic devices. To avoid scaffolding there is an array of UT and MFL shell crawlers to determine remaining wall.

To determine corrosion activity of tank floors in service you can use Acoustic Emission or In Service Tank Robots. Robots have some limitations and can be expensive.

Once you take a tank out of service you should be looking at some form of overall floor scanning such as MFL or SLOFEC. Statistical coupon cutting or spot ultrasonics is an ineffective method and poses substantial risks of missing problem areas.

This is just a flavour of what needs to be considered



 
 Reply 
 
Christoph Schnitger
Christoph Schnitger
05:10 Jun-17-2001
Re: Tank inspection
You can use the ultrasonic thickness gauge T-Scope III
from Stresstel in addition to the MFL Inspektion in case,
p.ex. you use the MFL Scanner from the company 3P Services
in Lingen.

You find there profile under : http://www.3p-services.com
if you look for new or used ultrasonic equipemnt, such
as T_Scope III from Stresstel ( new equipment ) or such
as Panametrics 26 DL Plus ( used equipment ) please contact
me directly under : schnitger@eure.de

Thanks
C.Schnitger


 
 Reply 
 
MFE Enterprises, Inc.
MFE Enterprises, Inc.
07:01 Jun-19-2001
Re: Tank inspection
MFE Enterprises, Inc. designs, manufactures and sell magnetic flux leakage equipment for the inspection of tank floors. This equipment is adapted to inspect shells in some instances. Please visit our web site at www.mfescan.com to obtain information concerning our products and our company. We will be happy to address any questions you may have via email.


 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window