where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
The priority of the company is to design and create highly technological equipment, for professional users. Aiming to reach the devices top techn ...
451 views
Technical Discussions
Jaeseok Park
R & D,
DOOSAN, South Korea, Joined Jun 2009, 10

Jaeseok Park

R & D,
DOOSAN,
South Korea,
Joined Jun 2009
10
03:45 Jun-09-2009
EN 1712

It is hard to understand some part of EN1712, please give me a hand :-)

1. Clause 3.4 describes evaluation levels for each methods suggested in clause 3.2, but method 3. What would be the evaluation level for method 3?

2. According to clause 3.5 and figure A.1, the recording levels for method 1 are ‘reference level -2dB’ or ‘reference level - 6dB’. And, the acceptance levels are given by table A.1 and figure A.1. If the indication has peak amplitude of ‘reference level -6dB’ and length of 1.5T. This indication is not the subject of recording but not-acceptable indication. Is it correct?

3. At 3rd paragraph of clause 4.1, it is stated that any planar indication is not acceptable. Is this statement goes well with the acceptance criteria suggested table A1/A2 and figure A1/A2?

Thank you.

 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window