where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

980 views
Technical Discussions
AZIZ U. REHMAN
R & D
Quaid-e-Azam University, Islamabad, Pakistan, Joined Apr 2001, 11

AZIZ U. REHMAN

R & D
Quaid-e-Azam University, Islamabad,
Pakistan,
Joined Apr 2001
11
07:44 Jul-12-2001
Stable Solid Material in terms of Velocities over a range of temeprature


Does any one know about a Solid or a mixture of solid material that is stable in terms of Ultrasonic Velocities over a range of Temperatures from Room Temp. to about 70 Deg. C.

Thanking you in anticipation.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1307

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1307
00:16 Jul-12-2001
Re: Stable Solid Material in terms of Velocities over a range of temeprature
I suppose that by stable you mean that the velocity does not change (much).
Most materials will change, some more than others; however,
steel (and other metals) has a relatvely low dV/dT
on the order of less than a meter per sec per degree C
(typically 0.01%).
e.g. shear wave in steel has a dV/dT of about 0.3m/s/°C

:
: Does any one know about a Solid or a mixture of solid material that is stable in terms of Ultrasonic Velocities over a range of Temperatures from Room Temp. to about 70 Deg. C.
.
: Thanking you in anticipation.
.



 
 Reply 
 
Bruce Maxfield
Engineering, electronics and instrumentation
Analogic Engineering, Inc., USA, Joined Jan 2000, 10

Bruce Maxfield

Engineering, electronics and instrumentation
Analogic Engineering, Inc.,
USA,
Joined Jan 2000
10
02:05 Jul-12-2001
Re: Stable Solid Material in terms of Velocities over a range of temeprature
:
: Does any one know about a Solid or a mixture of solid material that is stable in terms of Ultrasonic Velocities over a range of Temperatures from Room Temp. to about 70 Deg. C.
.
: Thanking you in anticipation.
.
You might want to consider one of the common optical glasses like BK-7 or Zerodur as these are designed to have a very small thermal expansion coefficient near room temperature and this means a small l-wave velocity temperature coefficient.


 
 Reply 
 
AZIZ U. REHMAN
R & D
Quaid-e-Azam University, Islamabad, Pakistan, Joined Apr 2001, 11

AZIZ U. REHMAN

R & D
Quaid-e-Azam University, Islamabad,
Pakistan,
Joined Apr 2001
11
02:19 Jul-12-2001
Re: Stable Solid Material in terms of Velocities over a range of temeprature
Dear Sir ,

You are right, but need to have something with the velocities less than the shear velocity in Steel to have the shear mode generated inside steel, but staying stable inside the wedge (in terms of wedge velocity) even with the variation in temperature of the Wedge.

Can you have an idea.




 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window