where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1180 views
Technical Discussions
David Bunch
David Bunch
01:37 Dec-18-2009
What version of the ASME Basic Block is used on the API QUTE test?

What version of the ASME Basic Block is used on the API QUTE test? Also, what type of calibration block is recommended for linearity?

 
 Reply 
 
J. Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

J. Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
13:39 Dec-18-2009
Re: What version of the ASME Basic Block is used on the API QUTE test?
In Reply to David Bunch at 01:37 Dec-18-2009 (Opening).

David,

A pipe or plate calibration block is provided by API with 10% ID and OD notches for each test sample.

This is outlined in the API Test Protocol

J. Mark Davis
Davis NDE, Inc.
University of Ultrasonics

 
 Reply 
 
Phil Herman
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
17:24 Dec-18-2009
Re: What version of the ASME Basic Block is used on the API QUTE test?
In Reply to David Bunch at 01:37 Dec-18-2009 (Opening).

David,
Mark has already answered your question on an API block suggestion. You also asked about a block to evaluate linearity. Check out the Horizontal and Vertical Linearity block from ASTM E317-06a, Fig. 1. Good luck.
Phil

 
 Reply 
 
David Bunch
David Bunch
21:16 Dec-18-2009
Re: What version of the ASME Basic Block is used on the API QUTE test?
In Reply to J. Mark Davis at 13:39 Dec-18-2009 .

Thanks Mr. Davis. Yes, I have downloaded and printed out the test protocol, along with the API-UT1 and UT2 procedures. However, I didn't recall seeing any information on the basic block except that one would be provided for me. I am surprised to see that the notches are 10%. I simply need similar calibration blocks on which to practice. The majority of my UT work has been AWS.

Phil, do you know where I can find the ASTM horizontal and vertical linearity block?

 
 Reply 
 
Phil Herman
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
05:15 Dec-19-2009
Re: What version of the ASME Basic Block is used on the API QUTE test?
In Reply to David Bunch at 21:16 Dec-18-2009 .

David,
You can find the horizontal and vertical linearity block on the PH Tool Reference Standards online store. I will send you a link.
Phil

 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window