where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

623 views
Technical Discussions
Patrick
Patrick
00:15 Aug-18-2001
Surface roughness

Dear collegues,

I am trying to do surface roughness characterization with eddy current probe. Can you advise me about one method that can do this.

Thanking you in advance

Patrick



 
 Reply 
 
Richard D. Finlayson
Director, Operations
Princeton Instruments, USA, Joined Jun 2000, 8

Richard D. Finlayson

Director, Operations
Princeton Instruments,
USA,
Joined Jun 2000
8
02:11 Aug-22-2001
Re: Surface roughness
: Dear collegues,
.
: I am trying to do surface roughness characterization with eddy current probe. Can you advise me about one method that can do this.
.
: Thanking you in advance
.
: Patrick
.

Patrick,
We have developed a system using stress waves that can differentiate between different roughness levels. If you can contact me I can discuss the system further.
Richard



 
 Reply 
 
Dr. Patel
R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University, Canada, Joined May 2001, 20

Dr. Patel

R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University,
Canada,
Joined May 2001
20
01:54 Aug-24-2001
Re: Surface roughness
: Dear collegues,
.
: I am trying to do surface roughness characterization with eddy current probe. Can you advise me about one method that can do this.
.
: Thanking you in advance
.
: Patrick

We have developed and used ultrasonic system to measure surface roughness on plates and parts during turning. The system also can measure parts thicknesses in micron accuracy and also measures surface integrity and stresses. If you are interested please contact us at above email.

Regards

Dr. Patel
.



 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window