where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
395 views
Job Offers
Abdelmalek
Director, - President & CEO
Yamani Institute of Technology, Algeria, Joined Nov 2001, 23

Abdelmalek

Director, - President & CEO
Yamani Institute of Technology,
Algeria,
Joined Nov 2001
23
12:55 Mar-15-2010
Operation Manager Wanted

Job Location: SAudi Arabia
offered by TESC Arabia

Dear All,

a few month old NDT company operating in KSA is in need for an Operation Manager whose job description and credentials are as follow:

•10 years experience in an inspection or NDT environment

•6 years experience in a managerial role

•Knowledge of NDT and Inspection Operations

•Interpersonal skills

•Organizational skills

•Microsoft Excel and Windows

•Groupwise

•Relevant NDT qualifications preferred, but not essential.

ARAB Origin and Middle East experience is an added value but not a pre-requisite.

 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window