where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NOVO DR
develops and manufactures cutting edge Portable Digital Radiography X-ray Inspection Systems.
796 views
Technical Discussions
ismail sarpun
ismail sarpun
00:48 Sep-11-2001
Rayleigh waves

I want to establish a system that can measure grain size by rayleigh waves.
Is there anybody that help me, how can I measure grain size by this way and
how can establish that experiment setup.
thanks for your helps.


 
 Reply 
 
Ernst Niederleithinger
R & D, -
BAM (Fed. inst. for material research and testing, Germany, Joined Jun 2001, 7

Ernst Niederleithinger

R & D, -
BAM (Fed. inst. for material research and testing,
Germany,
Joined Jun 2001
7
01:00 Sep-11-2001
Re: Rayleigh waves
: I want to establish a system that can measure grain size by rayleigh waves.
: Is there anybody that help me, how can I measure grain size by this way and
: how can establish that experiment setup.
: thanks for your helps.

Very interesting. Rayleigh waves are very popular in geophysical/geotechnical testing
(SASW method).
Grain size: R. Chammas (of French streets and bridges authority)
has done FE modelling on the influence of inclusions
on surface waves (rabih.chammas@lcps.fr).
Please keep me informed!





 
 Reply 
 
Bruce Maxfield
Engineering, electronics and instrumentation
Analogic Engineering, Inc., USA, Joined Jan 2000, 10

Bruce Maxfield

Engineering, electronics and instrumentation
Analogic Engineering, Inc.,
USA,
Joined Jan 2000
10
01:24 Sep-12-2001
Re: Rayleigh waves
: I want to establish a system that can measure grain size by rayleigh waves.
: Is there anybody that help me, how can I measure grain size by this way and
: how can establish that experiment setup.
: thanks for your helps.
.

I have been working with Fallon Ultrasonics, Inc. on methods to deduce residual stresses from elastic wave velocity measurements. As part of this work, I have used Rayleigh wave ( relatively insensitive to stress) and critically refracted longitudinal wave (much more sensitive to stress) velocities (actually, travel times). These waves have been generated using focused ultrasonic beams like those generated by spherically and cylindrically focused ultrasonic transducers, by plastic wedges of an appropriate angle and by plane waves at an angle to the specimen surface in a water bath. Each of these methods has one or more advantages over the others. In all cases of practical alloys that we have studied, grain scattering is the material parameter that limits the highest frequency that can be used. We have not yet done much quantitative work with respect to determining grain size but it is very clear that the attenuation of these waves is strongly influenced by grain scattering at higher frequencies (as expected) and that this attenuation can be measured with relative ease. There are several corrections that must be made to the measured attenuation in order to obtain the grain scattering term which can be used to deduce the "mean" grain diameter in the region of material being sampled by the elastic wave. If you care to let me know the material and grain size range that is of interest to you, I can give you some general idea of the magnitude of effort that will be required.


 
 Reply 
 

Product Spotlight

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window