where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
756 views
Technical Discussions
Carlos Correia
R & D, - -
UCV & EGROUP, Venezuela, Joined Oct 2008, 120

Carlos Correia

R & D, - -
UCV & EGROUP,
Venezuela,
Joined Oct 2008
120
06:43 Jun-24-2010
Ground penetrating radar

Hello NDT brothers.

One of my customers needs to examine a 3 meters underground floor to explore for energized AC cables. Which is the deeper thickness the RADAR systems can evaluate?, can some specialist give me some guidelines, deeply appreciated???

 
 Reply 
 
Massimo Schinelli
Consultant, Geotechnics
Schinelli Consulting, Italy, Joined Jan 2001, 8

Massimo Schinelli

Consultant, Geotechnics
Schinelli Consulting,
Italy,
Joined Jan 2001
8
20:51 Jun-24-2010
Re: Ground penetrating radar
In Reply to Carlos Correia at 06:43 Jun-24-2010 (Opening).

If the concrete or soil is dry, you can reach even more than 3 metres depth using, for instance, a 500 MHz antenna. In case there is some thick reinforcement in the concrete over your target you may have a very high scattering of the signal, that may mask the reflections of your actual targets. Furthermore the larger is the diameter of the cables you want to inspect, the more clear and reliable will be the reflected signal. If the cables you are going to inspect are large diameter cables (i.e. high-voltage underground cables) you have some possibilities of detecting them with GPR, otherwise, if they are relatively small diameter cables you have really few chances to detect them at 3 m depth.
Best regards,
Massimo Schinelli

 
 Reply 
 
Carlos Correia
R & D, - -
UCV & EGROUP, Venezuela, Joined Oct 2008, 120

Carlos Correia

R & D, - -
UCV & EGROUP,
Venezuela,
Joined Oct 2008
120
00:54 Jun-25-2010
Re: Ground penetrating radar
In Reply to Massimo Schinelli at 20:51 Jun-24-2010 .

Thank you very much MAssimo !!!!

I have some other questions. Which could be the minimum cable diameter that could be detected. ???

Do you know any branch of reconized equipments?

Thanks

 
 Reply 
 
Massimo Schinelli
Consultant, Geotechnics
Schinelli Consulting, Italy, Joined Jan 2001, 8

Massimo Schinelli

Consultant, Geotechnics
Schinelli Consulting,
Italy,
Joined Jan 2001
8
16:14 Jun-25-2010
Re: Ground penetrating radar
In Reply to Carlos Correia at 00:54 Jun-25-2010 .

If the material above the cables is very uniform, upon my experience at 3 mtres depth using a 400 or 500 MHz antenna, you could be able to detect 10 cm diametre high voltage cables. For smaller diametres it is very unlikely, unless there is more then one cable and the cables are quite close so that they form a sort o beam (but generally HV cables are kept quite apart one to the other in order to allow heat dispersion).
For what concerns brenches of companies that sell GPR equipment in Venezuela I don't know any. Instead if you are looking for companies that proviode GPR services in Venezuela you can ask Beta PLC, to which we (Schinelli Consulting) provide NDT services in the Caribbean and in Venezuela.
Best regards,
Massimo Schinelli

 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window