where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
654 views
Technical Discussions
tomas perez a.
NDT Inspector
Refineria Panama,S.A. (TEXACO), Algeria, Joined Dec 1999, 3

tomas perez a.

NDT Inspector
Refineria Panama,S.A. (TEXACO),
Algeria,
Joined Dec 1999
3
02:03 Nov-07-2001
UT flaw detector

HI friends.

I´m needing information about the trics of calibration in UT equipment.....Can someone help me about that? Have someone information about procedures of calibration in UT equipment?

I´ll appreciate you all data tha you send me.

Regards and thanks a lot friends.




 
 Reply 
 
William Blum
William Blum
08:27 Nov-07-2001
Re: UT flaw detector
There are a number of ways to calibrate your instrument. Often the applicable specification (e.g. ASME Section V, AWS D1.1) defines the requirements and techniques for calibration.

NDT Consulting Group Inc. can assist you in establishing your calibration and examination procedures. Please visit www.ndt-cgi.com to review our service and the procedures we have available.

William E. Blum
Managing Director
Bright Technical Services Inc.
www.brighttechnical.com
wblum@brightechnical.com
USA Toll Free evoice mail and fax 1-877-638-2441
USA eVoice Mail and Fax +1-214-853-5131
Sweden +46-42-14 39 99


: HI friends.
.
: I´m needing information about the trics of calibration in UT equipment.....Can someone help me about that? Have someone information about procedures of calibration in UT equipment?
.
: I´ll appreciate you all data tha you send me.
.
: Regards and thanks a lot friends.
.
:
.



 
 Reply 
 
Dave Wilkes
Dave Wilkes
08:47 Nov-07-2001
Re: UT flaw detector
The link below will show you how to calibrate
angle probes.


 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window