where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

456 views
Technical Discussions
AxlZ AekZ
R & D
King mongkut's university of technology Thonburi, Thailand, Joined Jun 2001, 16

AxlZ AekZ

R & D
King mongkut's university of technology Thonburi,
Thailand,
Joined Jun 2001
16
02:02 Nov-08-2001
Can I make coils sensor to use in wire rope inspection system?

If I want to detect localized faults by using coils sensor, Can I make them?
I want to know about
1. No. of coil (swg.)
2. core for coil(material)
3. No. of turns
4. directional
5. the important factors
6. flux density to saturate the rope (d=<50mm)
If can't tell me please guild line for me please.


Thank you very much.
AxlZ AekZ.



 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
07:13 Dec-12-2001
Re: Can I make coils sensor to use in wire rope inspection system?
: If I want to detect localized faults by using coils sensor, Can I make them?
: I want to know about
: 1. No. of coil (swg.)
: 2. core for coil(material)
: 3. No. of turns
: 4. directional
: 5. the important factors
: 6. flux density to saturate the rope (d=<50mm)
: If can't tell me please guild line for me please.
.
:
: Thank you very much.
: AxlZ AekZ.
.

Hi,

Please contact the man below who seems to invent the best wire rope equipment on the market.

http://www.ndt.net/article/v04n08/zawada/zawada.htm

Kazimierz Zawada
Zawada NDT, Tatarkiewicza 8, 41-819 Zabrze, Poland
Email: zawada@silesia.top.pl Fax: ++48 32 2752167 http://www.zawada.z.pl




 
 Reply 
 

Product Spotlight

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window