where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
963 views
Technical Discussions
Isaac Keirsey
Isaac Keirsey
22:06 Aug-05-2011
UT in Alloys

My company is trying to find a consistent way to UT in alloys (sensitivity). Using conventional pulse echo A-scans would it help to do a transfer correction calibration to account for the attenuation loss from the cal block to the actual part?

 
 Reply 
 
GOWRISANTHOSH
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

GOWRISANTHOSH

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
19:20 Aug-06-2011
Re: UT in Alloys
In Reply to Isaac Keirsey at 22:06 Aug-05-2011 (Opening).

hi
UT in alloys - In this case, calibration block material would be same as your actual job. In my site any alloys{or TMCP m/l} want to do UT, customer provides the same material to make calibration blocks.
regards
Gowrisanthosh Palika

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 747

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
747
00:01 Aug-11-2011
Re: UT in Alloys
In Reply to Isaac Keirsey at 22:06 Aug-05-2011 (Opening).

Yes, you can use transfer correction.

 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window