where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1196 views
Technical Discussions
YONGOH SHIN
YONGOH SHIN
04:12 Feb-27-2002
Reliability of MT

When threaded fasteners, bolts, are inspected for circumferentail discontinuities in accordance with coil magnetization current formulas such as in MIL-STD-1949, nonrelevant indications in thread roots due to magnetic saturation are commonly obserbed. Recently, owing to continuous development of magnetic particle testing, a very small size crack can be detected by minimizing the magnetic field distortions.
Could anyone tell me the minimum crack size, length and depth, in the bolt roots to be detected by applying the advanced MT technology?
Could anyone inform me the relevant reports or your experiences about the above issues?
Thank you.


 
 Reply 
 
Dave Wilkes
Dave Wilkes
08:31 Feb-27-2002
Re: Reliability of MT
Could you tell us which advanced MT Technology you
are referring to ? What is the system called ?




 
 Reply 
 
Yongoh Shin
Yongoh Shin
03:50 Feb-27-2002
Re: Reliability of MT
It doesn't mean the specialized method.
In order to inspect flaws in bolt roots we have to use more sensitive MT equipment and material such as wet flourscent, more fine particle, and better lighting etc.
Anyway, I want to know more specific sensitivity of MPI.
What is the minimum crack size MPI can detect a flaw in steel bolt roots.
Please send me relevant reports or information if you have.

Sincerely,

Yongoh Shin
AEI ltd. in Calgary



 
 Reply 
 
Bill Cook
Bill Cook
01:42 Feb-28-2002
Re: Reliability of MT
: It doesn't mean the specialized method.
: In order to inspect flaws in bolt roots we have to use more sensitive MT equipment and material such as wet flourscent, more fine particle, and better lighting etc.
: Anyway, I want to know more specific sensitivity of MPI.
: What is the minimum crack size MPI can detect a flaw in steel bolt roots.

That will vary with the following:

Type of magnetizing current.
Strength of field.
Magnetic properties of the bolts.
Size of bolts
Thread characteristics (depth and type)

There is no "hard and fast" rule for minimum flaw size detectable.

Bill



 
 Reply 
 
N.T.Azarov
Engineering
GosNIIGA, Russia, Joined Jan 2000, 12

N.T.Azarov

Engineering
GosNIIGA,
Russia,
Joined Jan 2000
12
04:07 Feb-28-2002
Re: Reliability of MT
: It doesn't mean the specialized method.
: In order to inspect flaws in bolt roots we have to use more sensitive MT equipment and material such as wet flourscent, more fine particle, and better lighting etc.
: Anyway, I want to know more specific sensitivity of MPI.
: What is the minimum crack size MPI can detect a flaw in steel bolt roots.
: Please send me relevant reports or information if you have.
.
: Sincerely,
.
: Yongoh Shin
: AEI ltd. in Calgary
.


We have durablis (from 1995) experiences ultrasonic and magnetic (flouroscent) control of fatigue cracks in bolts by a diameter 16-18mm and length up to 100mm, used in aircraft. The reliability of detection of cracks in a t h r e a d by a magnetic method less than 50 %, ultrasonic - 80-90%.Is installed, that depth of detected cracks more 1mm, length 8-10mm.
N.T.Azarov.


 
 Reply 
 
Dave Wilkes
Dave Wilkes
08:39 Feb-28-2002
Re: Reliability of MT
As Bill Cook say's there is no "hard and fast" rule for minimum flaw size detectable.

Interpreting the indications produced by MT in bolt
roots is very, very difficult.

The minimum size that is detectable in a controlled
laboratory test is very different to that found in
the production environment.

We recently discussed the pro's and con's of testing
with both the 'Fluorescent' and 'Black on White'
MT methods and you might find the comments in that
article useful.

Fluorescent MPI - Is it really necessary ?

http://www.ndtcabin.com/fluor_mpi_upd.asp

Dave Wilkes



 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window