where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
3380 views
Technical Discussions
Andreas Hoffmann
Andreas Hoffmann
09:26 Oct-16-2009
LFET vs MFL

Hello again,

I have learned a great deal about the SLOFEC method and its advantages and disadvantages. I would like to thank you for your plenty feedback.

Now I have learned about the LFET technique. Could you tell me of the advantages of the LFET method over the MFL for the tank floor inspection? Are there any disadvantages or limitations to this method?

Many thanks in advance,

Andreas

 
 Reply 
 
Dan Schwartz
R & D,
USA, Joined Oct 2011, 1

Dan Schwartz

R & D,
USA,
Joined Oct 2011
1
14:50 Oct-20-2011
Re: LFET vs MFL
In Reply to Andreas Hoffmann at 09:26 Oct-16-2009 (Opening).

LFET is lightweight, requires little surface preparation and moves faster than MFL. MFL usually uses permanent magnets so it is heavier, requires sandblasting, cannot scan through coatings there is no way to determine if the flaw is top surface or bottom surface.

 
 Reply 
 
Mariano Fusaro
Mariano Fusaro
20:11 Oct-10-2016
Re: LFET vs MFL
In Reply to Dan Schwartz at 14:50 Oct-20-2011 .

LFET is a technology developed by a company called TesTex. There is no advantages from LFET over the MFL. The MFL is a technology used also in intelligent pigs developed by many companies in the world, like ROSEN, SILVERWING to mention a couple. The MFL is possible to be apply over coating up to 6mm thick. I tried the LFET in same conditions and you can see anything. It´s very frustrating to see a lot of lies through the web about this technique. The LFET ys realle unusefull for tank inspection. If you read carefully the API650 it makes a precise differentiation between LFET and MFL, recognizing the MFL like the right technology to inspect Bottom Tanks. Hopefully you will have your own experience that will let you decide. LFET does not work for this job.

 
 Reply 
 
ADAM JIN
ADAM JIN
16:11 Oct-19-2016
Re: LFET vs MFL
In Reply to Mariano Fusaro at 20:11 Oct-10-2016 .

Mariano,

Have you used the Testex LFET scanner? Are you saying it is not useful? Kindly explain why it is different and doe not work for tank bottom inspection.

Regards,
Adam

 
 Reply 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window