where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1008 views
Technical Discussions
eron
Worldwide, Joined Nov 2011, 5

eron

Worldwide,
Joined Nov 2011
5
00:29 Jan-19-2012
material testing

Members
What standard do you use for checking the elemental composition of stainless steels. What ranges for the different elements. I want to have a document that confirms what PMI or the MTR's give me.


thank you for your reply
Eron

    
 
 Reply 
 
Hari Kishore
NDT Inspector,
Sievert Group of Companies, India, Joined Nov 2011, 14

Hari Kishore

NDT Inspector,
Sievert Group of Companies,
India,
Joined Nov 2011
14
10:10 Jan-19-2012
Re: material testing
In Reply to eron at 00:29 Jan-19-2012 (Opening).

PMI

    
 
 Reply 
 
eron
Worldwide, Joined Nov 2011, 5

eron

Worldwide,
Joined Nov 2011
5
01:17 Jan-20-2012
Re: material testing
In Reply to eron at 00:29 Jan-19-2012 (Opening).

I am more looking for the astm or aisi document

    
 
 Reply 
 
S V Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S V Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
14:52 Jan-20-2012
Re: material testing
In Reply to eron at 01:17 Jan-20-2012 .

There are many standards for elemental analysis. Most of them depend on spectrography, XRF etc. for the main alloying elements and special equipment for Carbon and Sulphur (combustion based methods). Vacuum Emission Spectrometers provide almost a one-stop solution for most of the commercial austenitic stainless steels.

Confirmation of PMI (which is done mostly by Shop floor portable spectroscopy and or XRF) is done using the laboratory VES as mentioned above or wet chemical methods in case of border results.

Regards

Swamy

    
 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window