where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1104 views
Technical Discussions
Nalla Sivakumar.G
India, Joined Feb 2012, 1

Nalla Sivakumar.G

India,
Joined Feb 2012
1
10:20 Feb-23-2012
Transition Bevel Scanning

Dear all,
Our Company Making Transition Bevel Butt Joints For Booms. How Can i Check the joint. Please give deatil message.

 
 Reply 
 
Csaba Hollo
,
Retired, Canada, Joined Feb 2010, 301

Csaba Hollo

,
Retired,
Canada,
Joined Feb 2010
301
16:58 Feb-24-2012
Re: Transition Bevel Scanning
In Reply to Nalla Sivakumar.G at 10:20 Feb-23-2012 (Opening).

Not wanting to sound harsh, but you can't expect forum members to write your inspection procedure for you.

If you obtain a copy of CSA W59, or AWS D1.1, you may have enough information in those codes to make a determination on how to do this inspection.

The information you provided is insufficient to respond intelligently with any great detail.

 
 Reply 
 
Adel
Adel
00:29 Feb-25-2012
Re: Transition Bevel Scanning
In Reply to Nalla Sivakumar.G at 10:20 Feb-23-2012 (Opening).

Hello Nalla,

We have some works in NDT joints quality using infrared thermography (IRT), but I'm sorry, could you please give more descriptions of the problem...

Adel

 
 Reply 
 
coool guy
coool guy
18:39 Feb-25-2012
Re: Transition Bevel Scanning
In Reply to Nalla Sivakumar.G at 10:20 Feb-23-2012 (Opening).

are you from Leyland Deere?

 
 Reply 
 

Product Spotlight

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window