where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1657 views
Technical Discussions
bourgeois yvan
France, Joined Apr 2012, 2

bourgeois yvan

France,
Joined Apr 2012
2
15:10 Apr-25-2012
how to create artificial flaws in composite plates

I would like to know how to create artificial flaws in composite plates?

Thank you

    
 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
16:54 Apr-25-2012
Re: how to create artificial flaws in composite plates
In Reply to bourgeois yvan at 15:10 Apr-25-2012 (Opening).

Is this during or after plate manufacture?

    
 
 
bourgeois yvan
France, Joined Apr 2012, 2

bourgeois yvan

France,
Joined Apr 2012
2
19:03 Apr-25-2012
Re: how to create artificial flaws in composite plates
In Reply to Nigel Armstrong at 16:54 Apr-25-2012 .

It's before plate manufacture.

For example, to create an inclusion, I put a teflon wafer betwenn 2 plies before RTM process.

After creating defects, I would like to control my plates by ultrasonic control.

    
 
 
flavio vendramin
NDT Inspector,
TAG s.r.l. Cremella ( Lecco ), Italy, Joined Apr 2010, 42

flavio vendramin

NDT Inspector,
TAG s.r.l. Cremella ( Lecco ),
Italy,
Joined Apr 2010
42
10:59 Apr-27-2012
Re: how to create artificial flaws in composite plates
In Reply to bourgeois yvan at 15:10 Apr-25-2012 (Opening).

After RTM process is possible to create a impact damage at various load or a little spotface by milling.
Before RTM to create delamination by various type of plastic material sheet ( different attenuation during UT inspection) not only PTFE.
bye

    
 
 
norm woodward
norm woodward
16:00 Apr-27-2012
Re: how to create artificial flaws in composite plates
In Reply to bourgeois yvan at 15:10 Apr-25-2012 (Opening).

In simulating damage in a composite structure, the first things to ask is what kinds of defects are being sought and what methods of detection am I contemplating.

For example, low frequency eddy current and x-ray might be able to find “disbonds” simulated with flat bottomed holes, yet be useless in finding real disbonds in metallic structures. Likewise, thermography, and again radiography, might be able image Teflon inserts, yet not be as successful in real applications.

Conversely, sometimes the more basic (ruthless) approach is the best approach. A thin, sharp blade shoved into the edge of a glue line of a bonded structure might create the perfect disbond simulation, while a properly applied ball-peen hammer might produce a great “simulation” of in-service impact damage.

    
 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

I&T Nardoni

NDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER I&T NARDON INSTITUTE was idiated
...
in 1988 by Giuseppe Nardoni, now president and owner of the company, based on his multi-annual and international experience in the field of NDT.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window