where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1302 views
Technical Discussions
S.Priyan
NDT Inspector, AUT / PAUT / TOFD
UTQ / IXAR, India, Joined Sep 2011, 15

S.Priyan

NDT Inspector, AUT / PAUT / TOFD
UTQ / IXAR,
India,
Joined Sep 2011
15
06:40 Jun-21-2012
Longitudinal waves - Clade pipe Weld Inspection

Dear all..,
What are the possibilities & Ideas for using Longitudinal waves from PA for Clade pipe weld Inspection ?
Eagerly waiting for your reply.

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
12:15 Jun-21-2012
Re: Longitudinal waves - Clade pipe Weld Inspection
In Reply to S.Priyan at 06:40 Jun-21-2012 (Opening).

Please share your ideas as an advanced UT specialist with us. Eageerly awaiting to read what you have learnt/achieved since you posted a similar question which was answered by Ed Ginzel and John O'Brien in March this year.

 
 Reply 
 
S.Priyan
NDT Inspector, AUT / PAUT / TOFD
UTQ / IXAR, India, Joined Sep 2011, 15

S.Priyan

NDT Inspector, AUT / PAUT / TOFD
UTQ / IXAR,
India,
Joined Sep 2011
15
07:32 Jun-22-2012
Re: Longitudinal waves - Clade pipe Weld Inspection
In Reply to Nigel Armstrong at 12:15 Jun-21-2012 .

Dear Nigel Armstrong..,
I can feel that i got some more information from Mr.Ed, John reply in this March.
Also i want to get some more ideas from my Colleagues.
Give me your mail ID I will explain briefly what i have learnt/achieved.I can't explain you with a single post of Reply also i don't know in which base you are asking this.
I hope you will understand.

 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window