where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
1394 views
Career Discussions
Brian Williams
Engineering,
South Korea, Joined Nov 2012, 2

Brian Williams

Engineering,
South Korea,
Joined Nov 2012
2
17:36 Nov-24-2012
Some questions about Welding and NDT

offered by Brian Williams <64room@gmail.com>
Download Virus Scan recommended!

Those questions are welding and NDT methods in Iraq.
But If you have no experience there, you just can give conceptual information.

I am very pleased to meet you all here and I hope you could give many helpful methods to me. Because I don't have enough information about NDT.

Thanks and best regards.
★ My E-mail Address : 64room@gmail.com

 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1274

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1274
23:08 Nov-24-2012
Re: Some questions about Welding and NDT
In Reply to Brian Williams at 17:36 Nov-24-2012 (Opening).

Brian, these do not seem like questions about AUT on a pipeline. If this is your first project I would suggest you contact/contract someone with some experience on assembling the equipment and procedures required. Pricing and estimating time is not something you can do without a good deal more information than in the Excel form posted. AUT is complex and demanding so a lot of details will be involved...regardless of the country that the work is being carried out in.

 
 Reply 
 
Brian Williams
Engineering,
South Korea, Joined Nov 2012, 2

Brian Williams

Engineering,
South Korea,
Joined Nov 2012
2
04:17 Nov-25-2012
Re: Some questions about Welding and NDT
In Reply to Ed Ginzel at 23:08 Nov-24-2012 .

I contacted some welding companies and also NDT companies in korea which want to work there together.
But They suggested many different ways of welding and NDT.

For example,
1. "A" NDT company said the NDT(PAUT) cost for the project will cost over than 5,000,000 USD.
I think that cost is really expensive. because especially there will not need many workers on it.
and We contracted with a company by giving 1,400,000USD on the domestic gas pipeline project(30" : 63km)
Even though it is half long project, It is 30" and How can they want 4 times cost?

2. "B" welding company said If they carry out by auto welding, they need 100 workers.
I think that the number of workers on Auto welding are too many.

That is why I posted it.

Thanks for the answer, EdGinzel.

 
 Reply 
 
Jon Wallis
NDT Inspector, -
Netherlands, Joined Feb 2010, 626

Jon Wallis

NDT Inspector, -
Netherlands,
Joined Feb 2010
626
09:28 Nov-25-2012
Re: Some questions about Welding and NDT
In Reply to Brian Williams at 04:17 Nov-25-2012 .

It seems that you are looking for advice on finding a contractor to carry out welding and ndt on this pipeline. This site is not really the right platform for you however, I can suggest the following.
You need to go about this in a more strucured way than it seems you are doing now. You'll need to gather all the relevant information about the project, present it in a bid question form - far more detailed then the excel sheet you showed us and it must be written in a way that it can be clearly understood what is required. You need to conduct a market survey of all companies that fall within your equirements. After a shortlist has been drawn up you mav need to carry out audits of the selected companies... This is a very crude outline of some of the steps that will have to be taken so that you don't get fleeced or throw money away.
Fools go where angels fear to tread!

 
 Reply 
 
JM
JM
13:02 Nov-27-2012
Re: Some questions about Welding and NDT
In Reply to Brian Williams at 17:36 Nov-24-2012 (Opening).

Brian, I will try to help you on this issue, I have known some contractors who are currently working in Iraq, if your project location is in Basra then I can give you reliable company who can assist you,mail me at jmdoha@gmail.com

 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window