where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1035 views
Technical Discussions
mohsen
NDT Inspector,
arta industry testing, Iran, Joined Jan 2013, 19

mohsen

NDT Inspector,
arta industry testing,
Iran,
Joined Jan 2013
19
17:32 Jan-21-2013
test of cng cars

hi
I'm looking for a way or method of ndt to test of cng cars.Apart from the visual test can anyone help me?

 
 Reply 
 
john
john
18:15 Jan-21-2013
Re: test of cng cars
In Reply to mohsen at 17:32 Jan-21-2013 (Opening).

Can you be a little more specific? what part of the car are you testing? tires? speed? mpg? (kpg)

 
 Reply 
 
mhsen
NDT Inspector,
arta industry testing, Iran, Joined Jan 2013, 19

mhsen

NDT Inspector,
arta industry testing,
Iran,
Joined Jan 2013
19
22:10 Jan-22-2013
Re: test of cng cars
In Reply to john at 18:15 Jan-21-2013 .

my meaning was the test of CNG tanks that installed in the cars, according to the standard these cng tanks should be tested at least once every 3 years. in our country only VT for check them and we follow the developed method to test these components,for example AE, ET or UT...what's your opinion? do you have information in this regard? I am grateful for your help, thanks..

 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window