where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
779 views
Technical Discussions
Dr Ahmed Yamani
Director, - President & CEO
Yamani Institute of Technology, Algeria, Joined Nov 2001, 23

Dr Ahmed Yamani

Director, - President & CEO
Yamani Institute of Technology,
Algeria,
Joined Nov 2001
23
08:35 Nov-05-2002
Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete

Dear Colleagues,


I appreciate very much if any one can direct me to techniques used or any literature available on the assessment of corrosion in Fusion-Bonded-Epoxy-Coated Rebar in concrete.
The cover (depth of concrete above the bar) is about 4 to 6 cm, I was thinking of using eddy current techniques for that. Any comments are much welcome.



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
01:38 Nov-07-2002
Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete
I think you may find the standoff too great to obtain reliable results. In the UK the civil industry is working with AE through a product called AECORR to monitor active corrosion of steel in concrete. It may be worth looking at.


 
 Reply 
 
Weihua Mao
Weihua Mao
05:38 Nov-11-2002
Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete
I guess that we are doing similar inpsection to your problem.
Our company, the Pressure Pipe Inspection Company, developed a technique called Remote Field Eddy Current / Transformer Coupling. We inspect the broken prestressing steel wires in concrete pipes. In general, the pipes are underground and we inspect them from the inside of the pipes. We can tell the number of broken steel wires even there is a Gauge 14 steel cylinder.

Could you tell me more details about your problem? Such as the geometry and requrement.


Weihua Mao

: Dear Colleagues,
.
:
: I appreciate very much if any one can direct me to techniques used or any literature available on the assessment of corrosion in Fusion-Bonded-Epoxy-Coated Rebar in concrete.
: The cover (depth of concrete above the bar) is about 4 to 6 cm, I was thinking of using eddy current techniques for that. Any comments are much welcome.





 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window