where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

967 views
Technical Discussions
Tim Heimel
NDT Inspector,
USA, Joined May 2001, 2

Tim Heimel

NDT Inspector,
USA,
Joined May 2001
2
07:27 Nov-22-2002
Liquid Level in Halon Bottles

Colleagues -
Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.
Thanks in advance for any replies.
Tim Heimel


 
 Reply 
 
Jim Knowles
Jim Knowles
07:49 Nov-22-2002
Re: Liquid Level in Halon Bottles
: Colleagues -
: Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.

Velocity in liquid Halon is around ~800m/s
Calibrate your PE system for the far side of the container.
Alternatively try a through transmission technique.
: Thanks in advance for any replies.
: Tim Heimel
.



 
 Reply 
 
John Pursley
R & D
Envision Product Design, USA, Joined Oct 1999, 23

John Pursley

R & D
Envision Product Design,
USA,
Joined Oct 1999
23
02:18 Nov-22-2002
Re: Liquid Level in Halon Bottles
Tim:
We have had success using infrared scanners and/or non-contact temperature probes along with hot water to measure halon levels in vertical cylinders located in oil facilities in Alaska. Hot water is poured down the outside of the cylinder, then the surface temperature is scanned with a non-contact IR sensor to discover the halon liquid level in the cylinder.


: Colleagues -
: Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.
: Thanks in advance for any replies.
: Tim Heimel
.



 
 Reply 
 
Tim Heimel
NDT Inspector,
USA, Joined May 2001, 2

Tim Heimel

NDT Inspector,
USA,
Joined May 2001
2
05:42 Nov-23-2002
Re: Liquid Level in Halon Bottles
: : Colleagues -
: : Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.

Thanks to all for the prompt & informed responses. I will try some of them next week and let the group know it turns out.

Tim
.
: Velocity in liquid Halon is around ~800m/s
: Calibrate your PE system for the far side of the container.
: Alternatively try a through transmission technique.
: : Thanks in advance for any replies.
: : Tim Heimel
: .
.



 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window