where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
4517 views
About NDT.net
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 612

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
612
20:09 Mar-03-2013
New Forum Feedback Function

We have launched a new function, which enables members to give "I Like" feedback to each forum message. We have not provided an "I Not Like" button, but you find a complain button as a "stop" symbol. By the complain feedback you can submit certain cases like junk, no NDT, advertising, abuse etc.. The complain is addressed to the moderator for further investigation of the case that may result in a removal of a message. The author of a message for which a feedback was submitted will receive automatically an email notification. "I Like" feedback is also good for the replacement of previously submitted "Thanks" messages, which we usually removed to avoid unnecessary email traffic.

Please make use of the new feature! Soon we will add an evaluation that shows in real-time who received the most feedback. Perhaps once a sponsor will spend nice presents for a Forum Award

Remember that we have also a rating system for articles.

Rolf Diederichs

1
 
 Reply 
 
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 612

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
612
20:23 Mar-03-2013
Re: New Forum Feedback Function
In Reply to Rolf Diederichs at 20:09 Mar-03-2013 (Opening).

I still have to remove almost every day posts that just stating "thank you". Please use the new "I like" feedback for this purpose.

Rolf

2
 
 Reply 
 
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 612

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
612
10:56 Jun-16-2013
Re: New Forum Feedback Function
In Reply to Rolf at 20:23 Mar-03-2013 .

So often I am removing messages like the recent one "Thank you so much Swamy sir!". Although in this case additionally the "Like/Thanks" button was used, I have to remove this post to avoid unnecessary posts. Still to many users posting "Thank you" instead of using the Like/Thanks" button.

Please use the new function in that we put our efforts!

Rolf

3
 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 612

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
612
22:59 Mar-14-2018
Re: New Forum Feedback Function
In Reply to Rolf at 10:56 Jun-16-2013 .

This post is addressed to all users that still post a simple reply: "Thanks"

Please pay attention to this old post in that we introduced our Like/Thanks feedback function. Please make use of this function since I do not want to continue every day to delete such "Thanks" posts.

Rolf

 
 Reply 
 

Product Spotlight

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window